All notable changes to this project will be documented in this file.
The format is based on Keep a Changelog, and this project adheres to PEP 440 and uses Semantic Versioning.
- The
update_asf_tools_version
andupdate_sdk_version
GitHub Actions workflows now use thegh
CLI instead of the archivedrepo-sync/pull-request
action.
- Updated HyP3 SDK to v7.0.1
- Note about incomplete archive in
burst_insar_product_guide.md
now that burst archive is complete
- Updated ASF Tools for Python to v0.8.0
- Document the announcement banner.
- Updated HyP3 SDK to v7.0.0
- Upgrade to Python 3.10.
- Revised the Requesting Access page to reflect that a release date has not yet been set and removed the page from the navigation menu.
- Disabled the site banner now that we are postponing the Requesting Access announcement.
- Revised the Requesting Access page to serve as an announcement for the upcoming change and added the page to the navigation menu.
- Revised the site banner to replace the Credits announcement with the Requesting Access announcement.
- Added Requesting Access page, not yet listed in the site index
- Added references to requesting access in the Using HyP3 documentation, commented out until new users must apply for access
- Updated language in InSAR product guides to clarify that only co-pol interferograms are available
- Updated status of burst back-population
- Switched to the use of a descending track in the MintPy tutorial so that all interferograms have full coverage of the observed event.
- The MintPy tutorial so that it correctly specifies
asf_search
parameters.
- Updated HyP3 SDK to v6.2.0
- Updated language to reflect release of the full credit system to production HyP3.
- Quota page now redirects to Credits page.
- Water Mask page describing the water mask used for InSAR processing, and linking to code and resources for accessing and generating the new reference water mask
- Updated ASF Tools for Python to v0.7.2
- Updated HyP3 SDK to v6.1.0
- Credits system announcement.
- Updated water mask descriptions.
- Updated water mask language to reflect switch to OpenStreetMap/ESA WorldCover based water map.
- Tutorial notebook demonstrating how to merge two burst InSAR products.
- Merge sentinel-1 burst InSAR products section on burst_insar_product_guide.md.
- Included 20 meter pixel spacing option for RTC products in product summary page.
- Updated HyP3 SDK to v6.0.0
- Updated HyP3 SDK to v5.0.0
- the DEM description and RTC product guide to inform users that the legacy DEM options are no longer available
- Link to
hyp3_isce2_burst_stack_for_ts_analysis.ipynb
directly in GitHub because https://nbviewer.org/github/ASFHyP3/hyp3-docs/blob/main/docs/tutorials/hyp3_isce2_burst_stack_for_ts_analysis.ipynb returns a404
.
- Added
hyp3_isce2_burst_stack_for_ts_analysis.ipynb
to make thehyp3-isce2
burst InSAR work with MintPy
- Changed
hyp3_insar_stack_for_ts_analysis.ipynb
to make it work with MintPy v1.5.2
- Announce Burst InSAR availability in Vertex
- Published Sentinel-1 Burst InSAR Guide
- Updated HyP3 SDK to v4.0.0
- Updated documentation to InSAR Product Guide to announce that the feature is available in Vertex
- Updated ASF Tools for Python to v0.6.0
- Updated the Burst Guide to reflect that water masking is now done before phase unwrapping.
- Updated HyP3 SDK to v3.1.0
- Added documentation to InSAR Product Guide for the adaptive phase filter parameter option.
- Restructured the Processing Options section of the InSAR Product Guide
- Updated admonition types to those that are supported by
mkdocs-material
v9.4.2+.
- Added notes indicating that GLO-90 tiles will fill missing GLO-30 tiles over Armenia and Azerbaijan.
- Upgraded to
mkdocs-asf-theme==0.3.0
. - Google Analytics is set up directly in mkdocs.yml as it's no longer set by default in the theme.
- Unpublished Sentinel-1 Burst InSAR Product Guide
- Clarified the range of possible pixel values for the lv_phi.tif file in the InSAR Product Guide. Fixes #334.
propose-tweet
GitHub action workflow. Closes #288.
- Updated HyP3 SDK to v3.0.0
- Updated docs after removing the Subscriptions feature.
- Revised the Subscriptions deprecation announcement to make it more clear that HyP3 itself is not being retired.
- Added more details regarding HyP3 Subscriptions deprecation, including the timeline for removal and steps for saving subscription metadata before it is deleted.
- Added tutorials for submitting HyP3 jobs based on granule search parameters (replaces HyP3 Subscriptions).
- Replaced the Subscriptions documentation with a link to the new tutorials.
- Upgraded the Conda environment to Python 3.9.
- References to the DEM pixel value unit (meters) in the RTC Product Guide and InSAR Product Guide
- Corrected error in DEM raster type description in the RTC Product Guide
- Updated HyP3 SDK to v2.1.1
- Updated HyP3 SDK to v2.1.0
- Documented public visibility of jobs in the Using HyP3 section.
- Added link to tutorial on searching for other users' jobs.
- Illustration for Pixel spacing description in the RTC Product Guide
- Additional information about the pixel spacing options
- Updated URLs in Sentinel-1 Mission document
- Removed message that 20-m pixel spacing option for RTC is not yet available in Vertex
- Updated HyP3 SDK to v2.0.2
- Updated the RTC Product Guide to accommodate the 20-m option for pixel spacing
- Added processing options table and descriptive text to the RTC Product Guide
- Added references/links to the processing options section as appropriate throughout the RTC Product Guide
- Added Mathjax as an option for formatting equations
- Updated HyP3 SDK to v2.0.1
- Updated HyP3 SDK to v2.0.0
- Updated ASF Tools for Python to v0.5.2
- Fix the reference to Copernicus DEM release version
- A GitHub Action for spell checking, with ASF-specific words whitelisted in .github/dictionary.txt
- A GitHub Action for link checking, with whitelisted links in .lycheeignore
- Minor grammatical and spelling mistakes
- Broken Copernicus DEM links
- Updated ASF Tools for Python to v0.5.0
- Updated ASF Tools for Python to v0.4.6
- Updated RTC Product Guide to announce new processing options
- Updated HyP3 SDK to v1.7.5
- Included timezone information in the MintPy tutorial when
comparing with
asf_search
results because date-times reported in search results will have a timezone as of asf_search v5.0.0.
- Updated HyP3 SDK to v1.7.3
- Section about RTC pixel spacing added to the RTC Product Guide
- Updated ASF Tools for Python to v0.4.5
- Updated HyP3 SDK to v1.7.2
- Added the decibel option in the Table 2 of the rtc-product-guide.md
- Updated ASF Tools for Python to v0.4.4
- Updated ASF Tools for Python to v0.4.3
- Updated HyP3 SDK to v1.7.1
- Updated API Use Guide to only use the ESA S2 naming convention.
- Corrected broken "Get Started" link in the RTC Product Guide.
- Updated descriptions of water mask to reflect the new unbuffered approach to masking
- Included links to the InSAR Water Masking Tutorial
- Updated HyP3 SDK to v1.7.0
- Added an information page about the Sentinel-1 mission to the Products section, bringing particular attention to the end of mission for Sentinel-1B
- Updated link behavior to be consistent in formatting, and open external links in a new tab whenever possible
- API reference for
hyp3_sdk
now documents theutil
module
- Updated ASF Tools for Python to v0.4.2
- API reference for
asf_tools
now documents all modules recursively. Fixes #243
- Updated ASF Tools for Python to v0.4.1
- Updated HyP3 SDK to v1.6.1
- Added a quick link,
https://hyp3-docs.asf.alaska.edu/tutorials/mintpy
, to our MintPy tutorial notebook - Added a landing page for HyP3 tutorials
- Added the HyP3 Python SDK tutorial as a navigation menu item under the "Tutorials" section
- Added information and reference links to the InSAR Product Guide for the Minimum Cost Flow phase unwrapping algorithm used for On Demand InSAR products
- Added clarification to the InSAR Product Guide that the sign convention used for unwrapped phase is opposite to that used for displacement maps.
- Added landing page for Using HyP3 section
- Added references to hyp3-docs repo citation
- Streamlined Getting Started portion of homepage
- Included more context on the Vertex landing page
- Updated references to Copernicus DEM GLO-30 to link to the latest 2021 release of the dataset and additional release details
- Updated the Copernicus DEM GLO-30 coverage map to include the additional tiles added to the DEM dataset with the latest release
- Created a
CITATION.cff
file for the repository that will make it easier for others to cite.
- Updated the MintPy time series analysis notebook
- Updated HyP3 SDK to v1.6.0
- Updated HyP3 SDK to v1.5.1
- Updated HyP3 SDK to v1.5.0
- Added a notebook to describe the time series analysis with hyp3 and mintpy
- Updated ASF Tools to include flood_map in v0.4.0
- Update MkDocs to version >1.2.3 to fix a Jinja2 compatibility issue (see #197)
- Updated description of SAR image pair selection in InSAR Product Guide to specify that HyP3 always uses the older image as the reference image.
- Pinned
pygments=2.11.2
in environment.yml to resolve a breaking change impactingmkdocs-material v6.2.8
- Updated descriptions of validity mask thresholds and reference point calculation in InSAR Product Guide to reflect changes to InSAR processing code.
- Added a link for the InSAR Product Guide to the Products page.
- Updated ASF Tools for Python to v0.3.3
- Updated ASF Tools for Python to v0.3.1
- Increase monthly job quota per user from 250 to 1,000
- Updated Figure 2 in Introduction to SAR
- Updated Figure 2 in InSAR Product Guide
- Set external links in InSAR Product Guide to display the target URL in the tool tip and open in a new browser tab.
- Updated Subscriptions document to include links to Vertex subscription documentation.
- Updated HyP3 SDK to v1.4.1
- Corrected the attribution for figures in the InSAR Product Guide and the Introduction to SAR
- Updated ASF Tools to v0.3.0
- Updated the InSAR Product Guide to reflect the change in the location of the phase unwrapping reference point (formerly the (0,0) location of the combined image pair, now the location of the pixel with the highest coherence value)
- Updated the InSAR Product Guide to adjust the list of parameters included in the parameter file
- Updated the InSAR Product Guide to include information about the fringe patterns in the InSAR browse images
- A Subscriptions page describing subscription functionality
- Updated HyP3 SDK to v1.4.0
- A User Quota page describing user quotas
- Updated the InSAR Product Guide to reflect changes in the option for including displacement maps in InSAR product packages
- Updated the URL for the Copernicus DEM information webpage
- Added information on the impacts of the phase unwrapping reference point on the phase difference and LOS Displacement values to the InSAR Product Guide
- Clarified the availability of the 'apply water mask' option in the InSAR Product Guide
- Updated HyP3 SDK to v1.3.2
- Updated the InSAR Product Guide to document the option to apply a water mask during phase unwrapping
- Updated HyP3 SDK to v1.3.1
- Updated HyP3 SDK to v1.3.0
- Updated the InSAR Product Guide to document the inclusion of an ellipsoid incidence angle map in the InSAR product package
- Updated the water mask description in the InSAR Product Guide to include large inland waterbodies
- Updated the InSAR Product Guide to document the inclusion of a water mask in the InSAR product package
- A What's New page which displays @ASFHyP3's twitter feed
- Updated HyP3 SDK to v1.2.0
- Added descriptions for each type of metadata file in the InSAR Product Guide, including the new ArcGIS-compliant metadata XML files added in hyp3-gamma 4.6.0
- Updated availability of InSAR options in InSAR Product Guide
- Corrected the InSAR API examples
job_type
parameter value
- Updated HyP3 SDK to v1.1.3
- Updated HyP3 SDK to v1.1.2
- Added a Contact Us snippet that is used on the Home page and a new Contact Us page
- Added SAR Basics -> Introduction to SAR page
- Added Products -> InSAR -> InSAR Product Guide page
- Re-organized site table of contents
- Moved product usage guidelines from Products page to a new Products -> Usage Guidelines page
- Updated RTC Product Guide and DEM reference page to state that the Copernicus DEM is now available
- Updated HyP3 SDK to v1.1.1
- Updated HyP3 SDK to v1.1.0
- Updated the RTC Product Guide and DEM Information section to include the Copernicus DEM GLO-30
- Added an abstract to the RTC Product Guide
- Updated the RTC Product Guide to include more information on SAR distortions, how they are addressed by radiometric terrain correction, and how to access ASF's On-Demand RTC processing functionality and resources
- HyP3 user documentation for the SDK and API, and links for Vertex's On Demand usage
- HyP3 product documentation for RTC, InSAR, and autoRIFT products
- Other associated tools documentation