-
Notifications
You must be signed in to change notification settings - Fork 0
/
tlc_config.h
173 lines (137 loc) · 6.15 KB
/
tlc_config.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
/* Copyright (c) 2009 by Alex Leone <acleone ~AT~ gmail.com>
This file is part of the Arduino TLC5940 Library.
The Arduino TLC5940 Library is free software: you can redistribute it
and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation, either version 3 of the
License, or (at your option) any later version.
The Arduino TLC5940 Library is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with The Arduino TLC5940 Library. If not, see
<http://www.gnu.org/licenses/>. */
#ifndef TLC_CONFIG_H
#define TLC_CONFIG_H
#include <stdint.h>
/** \file
Configuration for the Arduino Tlc5940 library. After making changes to
this file, delete Tlc5940.o in this folder so the changes are applied.
A summary of all the options:
- Number of TLCs daisy-chained: NUM_TLCS (default 1)
- Enable/Disable VPRG functionality: VPRG_ENABLED (default 0)
- Enable/Disable XERR functionality: XERR_ENABLED (default 0)
- Should the library use bit-banging (any pins) or hardware SPI (faster):
DATA_TRANSFER_MODE (default TLC_SPI)
- Which pins to use for bit-banging: SIN_PIN, SIN_PORT, SIN_DDR and
SCLK_PIN, SCLK_PORT, SCLK_DDR
- The PWM period: TLC_PWM_PERIOD (be sure to change TLC_GSCLK_PERIOD
accordingly!)
How to change the pin mapping:
- Arduino digital pin 0-7 = PORTD, PD0-7
- Arduino digital pin 8-13 = PORTB, PB0-5
- Arduino analog pin 0-5 = PORTC, PC0-5 */
/** Bit-bang using any two i/o pins */
#define TLC_BITBANG 1
/** Use the much faster hardware SPI module */
#define TLC_SPI 2
/* ------------------------ START EDITING HERE ----------------------------- */
/** Number of TLCs daisy-chained. To daisy-chain, attach the SOUT (TLC pin 17)
of the first TLC to the SIN (TLC pin 26) of the next. The rest of the pins
are attached normally.
\note Each TLC needs it's own IREF resistor */
#define NUM_TLCS 1
/** Determines how data should be transfered to the TLCs. Bit-banging can use
any two i/o pins, but the hardware SPI is faster.
- Bit-Bang = TLC_BITBANG
- Hardware SPI = TLC_SPI (default) */
#define DATA_TRANSFER_MODE TLC_SPI
/* This include is down here because the files it includes needs the data
transfer mode */
#include "pinouts/chip_includes.h"
/* Set DATA_TRANSFER_MODE to TLC_BITBANG and change the pins below if you need
to use different pins for sin and sclk. The defaults are defined in
pinouts/ATmega_xx8.h for most Arduino's. */
#if DATA_TRANSFER_MODE == TLC_BITBANG
/** SIN (TLC pin 26) */
#define SIN_PIN DEFAULT_BB_SIN_PIN
#define SIN_PORT DEFAULT_BB_SIN_PORT
#define SIN_DDR DEFAULT_BB_SIN_DDR
/** SCLK (TLC pin 25) */
#define SCLK_PIN DEFAULT_BB_SCLK_PIN
#define SCLK_PORT DEFAULT_BB_SCLK_PORT
#define SCLK_DDR DEFAULT_BB_SCLK_DDR
#endif
/** If more than 16 TLCs are daisy-chained, the channel type has to be uint16_t.
Default is uint8_t, which supports up to 16 TLCs. */
#define TLC_CHANNEL_TYPE uint8_t
/** Determines how long each PWM period should be, in clocks.
\f$\displaystyle f_{PWM} = \frac{f_{osc}}{2 * TLC\_PWM\_PERIOD} Hz \f$
\f$\displaystyle TLC\_PWM\_PERIOD = \frac{f_{osc}}{2 * f_{PWM}} \f$
This is related to TLC_GSCLK_PERIOD:
\f$\displaystyle TLC\_PWM\_PERIOD =
\frac{(TLC\_GSCLK\_PERIOD + 1) * 4096}{2} \f$
\note The default of 8192 means the PWM frequency is 976.5625Hz */
#define TLC_PWM_PERIOD 8192
/** Determines how long each period GSCLK is.
This is related to TLC_PWM_PERIOD:
\f$\displaystyle TLC\_GSCLK\_PERIOD =
\frac{2 * TLC\_PWM\_PERIOD}{4096} - 1 \f$
\note Default is 3 */
#define TLC_GSCLK_PERIOD 3
/** Enables/disables VPRG (TLC pin 27) functionality. If you need to set dot
correction data, this needs to be enabled.
- 0 VPRG is not connected. <em>TLC pin 27 must be grounded!</em> (default)
- 1 VPRG is connected
\note VPRG to GND inputs grayscale data, VPRG to Vcc inputs dot-correction
data */
#define VPRG_ENABLED 0
/** Enables/disables XERR (TLC pin 16) functionality to check for shorted/broken
LEDs
- 0 XERR is not connected (default)
- 1 XERR is connected
\note XERR is active low */
#define XERR_ENABLED 0
/* You can change the VPRG and XERR pins freely. The defaults are defined in
the chip-specific pinouts: see pinouts/ATmega_xx8.h for most Arduino's. */
#if VPRG_ENABLED
/** VPRG (TLC pin 27) */
#define VPRG_PIN DEFAULT_VPRG_PIN
#define VPRG_PORT DEFAULT_VPRG_PORT
#define VPRG_DDR DEFAULT_VPRG_DDR
#endif
#if XERR_ENABLED
/** XERR (TLC pin 16) */
#define XERR_PIN DEFAULT_XERR_PIN
#define XERR_PORT DEFAULT_XERR_PORT
#define XERR_DDR DEFAULT_XERR_DDR
#define XERR_PINS DEFAULT_XERR_PINS
#endif
/* ------------------------- STOP EDITING HERE ----------------------------- */
#if DATA_TRANSFER_MODE == TLC_SPI
/** SIN (TLC pin 26) */
#define SIN_PIN TLC_MOSI_PIN
#define SIN_PORT TLC_MOSI_PORT
#define SIN_DDR TLC_MOSI_DDR
/** SCLK (TLC pin 25) */
#define SCLK_PIN TLC_SCK_PIN
#define SCLK_PORT TLC_SCK_PORT
#define SCLK_DDR TLC_SCK_DDR
#endif
#if !(DATA_TRANSFER_MODE == TLC_BITBANG \
|| DATA_TRANSFER_MODE == TLC_SPI)
#error "Invalid DATA_TRANSFER_MODE specified, see DATA_TRANSFER_MODE"
#endif
/* Various Macros */
/** Arranges 2 grayscale values (0 - 4095) in the packed array format (3 bytes).
This is for array initializers only: the output is three comma seperated
8-bit values. */
#define GS_DUO(a, b) ((a) >> 4), ((a) << 4) | ((b) >> 8), (b)
#if VPRG_ENABLED
/** Arranges 4 dot correction values (0 - 63) in the packed array format.
\see setDCtoProgmemArray */
#define DC_QUARTET(a, b, c, d) ((a) << 2) | ((b) >> 4), \
((b) << 4) | ((c) >> 2), \
((c) << 6) | (d)
#endif
#endif