Functions

The MagicBlue app has a tab for a number of special functions, such as a strobe and a given color crossfade. Fortunelaty, these keep repeating after started. Unfortunately, the bulb only recognizes a static set, so we can't use this to crossfade specific colors.

To set one of these cycles, you can craft a handle as following:

• [bb] - RUN PRESET PROGRAM. A code that tells the bulb to start a program
• [..] - PROGRAM TYPE. A 2 digit hex that tells what program to run. See the list below
• [..] - SPEED. A 2 digit hex from 01 and up that sets the speed for the program
• [44] - Uncertain, seems static. Can be changed but does not change bulb reaction
• [0x] - Uncertain, first digit is static. Can be changed but does not change bulb reaction
• [xxxxxx] - Uncertain, seems random, could be a time stamp. Can be changed but does not change bulb reaction.

A sample: char-write-req 0x000c BB2603440A150722 will run a program that fades the bulb from off to red and back again.

Some PROGRAM TYPEs:

• 25: Seven color cross fade
• 26: Red gradual change
• 27: Green gradual change
• 28: Blue gradual change
• 29: Yellow gradual change
• 2a: Cyan gradual change
• 2b: Purple gradual change
• 2c: White gradual change
• 2d: Red, Green cross fade
• 2e: Red blue cross fade
• 2f: Green blue cross fade
• 30: Seven color stobe flash
• 31: Red strobe flash
• 32: Green strobe flash
• 33: Blue strobe flash
• 34: Yellow strobe flash
• 35: Cyan strobe flash
• 36: Purple strobe flash
• 37: White strobe flash
• 38: Seven color jumping change

SPEED

• 01 - fastest
• 20 - very slow (and goes slower still)