Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

[FEATURE REQUEST][1.20.1] Allow swapping capacity upgrades from GUI when drawer is full. #350

Open
tomprince opened this issue Dec 9, 2024 · 4 comments

Comments

@tomprince
Copy link

Description:

I'd like to be able to replace an upgrade with a higher tier upgrade from within the GUI.

@Buuz135
Copy link
Owner

Buuz135 commented Dec 9, 2024

You can already do that, by just clicking on the upgrade with another upgrade or by rightclicking the drawer with a higher upgrade in world. You can only do those things if the new storage capacity can hold the current items.

@Buuz135 Buuz135 closed this as completed Dec 9, 2024
@tomprince
Copy link
Author

I just tested in with no other mods installed, and it does not work (at least consistently).

My first test I tried with an oak drawer with an iron downgrade and a copper upgrade and ~128 items in it. With that setup, I could freely switch the copper upgrade for a gold upgrade. (I used an iron downgrade to more easily fill the drawer enough to require a card.

At this point, I thought it might be a mod interaction, so I tried testing with various more or less plausible mods from the modpack I am currently playing (Monifactory) and had the same result (i.e. being able to switch upgrades). Eventually, I tried that same first test in the pack itself and discovered it worked.

At that point I realized that it sometimes works and sometimes doesn't (as this isn't the first modpack I've played where I have been frustrated by being unable to switch upgrades).

After doing a bit of testing in the modpack, I returned to my instance with no other mods installed, and tested an oak drawer with a single copper upgrade and ~2.7k items. I was unable to switch the copper upgrade for a gold upgrade.

@Buuz135 Buuz135 reopened this Dec 11, 2024
@tomprince
Copy link
Author

I suspect this may be related (tested on 1.20.1 with no other mods): If I have a drawer with 65 items and a copper upgrade, I cannot install an iron downgrade into it (either via the gui or by clicking in-world with the upgrade.


Something that does work for switching upgrades: if all the upgrades slots are filled, clicking in-world with a higher tier upgrade will swap out a lower tier upgrade, even with more than 2048 items in the drawer.

@tomprince
Copy link
Author

I also discovered that if you have a drawer with a copper upgrade and an iron downgrade and 512 items, you can remove the upgrade leaving 512/64 items in the drawer.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

2 participants