Skip to content

Latest commit

 

History

History
235 lines (171 loc) · 8.09 KB

README.md

File metadata and controls

235 lines (171 loc) · 8.09 KB
Raw

compilation

Domain Tools

Code and tools to edit and manipulate ocean model grids and topographies.

Below is a list of included tools and short documentation for each.

Note: these tools support two types of vertical grids: MOM5 grids (with $2n+1$ values for an $n$-level model) and MOM6 grids (with $n+1$ values). It is important to select the correct type or the tools will produce incorrect results.

topogtools (Russ' Fortran tools)

usage: topogtools [--help] <command> [<args>]

Collection of tools to edit and manipulate ocean model topographies. See topogtools --help <command> to read about a specific subcommand.

Available commands:

  • gen_topo - Generate a new topography file from a bathymetry
  • deseas - Remove enclosed seas
  • min_max_depth - Set minimum and maximum depth
  • fill_fraction - Set cells with unsufficient ocean fraction to land
  • check_nonadvective - Check for non-advective cells
  • fix_nonadvective - Fix non-advective cells
  • mask - Generate mask

All commands other than gen_topo will add the following attributes to the depth variable in <output_file>. Except where explained below, these attributes will be copied from <input_file> if present, or otherwise set to the default values in this table.

Attribute Default Description
grid_type 'B' Arakawa grid type (B or C); determines advective connectivity between cells when counting seas in deseas, fill_fraction, check_nonadvective and fix_nonadvective
lakes_removed 'no ' Whether all isolated water bodies have been replaced by land
nonadvective_cells_removed 'yes' Whether fix_nonadvective has been applied (BUG: always 'yes')

gen_topo

usage: topogtools gen_topo --input <input_file> --output <output_file>
                           --hgrid <grid> [<options>]

Generate a new topography from <input_file> on the tracer points of <grid> and writes the result to <output_file>. Note that <grid> must be a super-grid.

Options

  • --tripolar set this option if the horizontal grid is a tripolar grid
  • --longitude-offset <value> offset (in degrees) between the central longitude of the ocean horizontal grid and of the bathymetry grid (default '0.0')

deseas

usage: topogtools deseas --input <input_file> --output <output_file> [--grid_type <type>]

Remove enclosed seas from <input_file> and write the result to <output_file>, using advective connectivity rules set by --grid_type (B or C); if --grid_type is not specified, the grid_type attribute of depth in <input_file> is used, defaulting to B if that attribute is absent.

Sets the lakes_removed attribute in <output_file> to 'yes'. If --grid_type is specified, this sets the grid_type attribute in <output_file>.

Also creates a sea_num.nc file showing how the seas are numbered.

Options

  • --grid_type <type> Arakawa type of horizontal grid (B or C; default is B)

min_max_depth

usage: topogtools min_max_depth --input <input_file> --output <output_file>
                                --level <level>
                                [--vgrid <vgrid> --vgrid_type <type>]

Set minimum depth to the depth at level <level> and set maximum depth to deepest in <vgrid>. <level> is the minimum number of depth levels (e.g. 4). These values are recorded in the minimum_levels, minimum_depth and maximum_depth attributes of depth in <output_file>.

Can produce non-advective cells.

Options

  • --vgrid <vgrid> vertical grid (default 'ocean_vgrid.nc')
  • --vgrid_type <type> can be mom5 or mom6 (default 'mom5')

fill_fraction

usage: topogtools fill_fraction --input <input_file> --output <output_file>
                                --fraction <frac>

Cells with a fraction of sea area smaller than <frac> will have their depth set to zero.

Can produce non-advective cells.

Can also produce new isolated seas - if this is the case, a warning is given and the lakes_removed attribute of depth is set to 'no '.

check_nonadvective

usage: topogtools check_nonadvective --input <input_file>
                                      [--vgrid <vgrid> --vgrid_type <type>
                                       --potholes --coastal-cells]

Check topography for non-advective cells. There are two types of checks available: potholes and non-advective coastal cells. B-grid connectivity rules are assumed. Aborts if grid_type attribute of depth in <input_file> is present and not 'B'.

Options

  • --vgrid <vgrid> vertical grid (default 'ocean_vgrid.nc')
  • --vgrid_type <type> can be mom5 or mom6 (default 'mom5')
  • --potholes check for potholes
  • --coastal-cells check for non-advective coastal cells

fix_nonadvective

usage: topogtools fix_nonadvective --input <input_file> --output <output_file>
                                   [--vgrid <vgrid>  --vgrid_type <type>
                                    --potholes --coastal-cells]

Fix non-advective cells. There are two types of checks available: potholes and non-advective coastal cells. If either is used, the nonadvective_cells_removed attribute of depth is set to 'yes'. B-grid connectivity rules are assumed. Aborts if grid_type attribute of depth in <input_file> is present and not 'B'.

Can produce new isolated seas. If this is the case, a warning is given and the lakes_removed attribute of depth is set to 'no '.

Options

  • --vgrid <vgrid> vertical grid (default 'ocean_vgrid.nc')
  • --vgrid_type <type> can be mom5 or mom6 (default 'mom5')
  • --potholes fix potholes
  • --coastal-cells fix non-advective coastal cells

mask

usage: topogtools mask  --input <input_file> --output <output_file>

Creates a land mask from a topography.

float_vgrid

usage: float_vgrid [--vgrid <vgrid>]

Alter values in ocean vertical grid so they can be used with both single- and double-precision topography file.

Options

  • --vgrid <vgrid> vertical grid (default 'ocean_vgrid.nc')

min_dy

usage: topogtools min_dy --input <input_file> --output <output_file> --cutoff <cutoff_value>
                        [--hgrid <hgrid_file>]

Convert ocean cells into land if their y size is smaller than <cutoff_value>, expressed in the same units as dy in <hgrid_file> (typically metres).

Options

  • --hgrid <hgrid_file> horizontal supergrid file (default 'ocean_hgrid.nc')

test/png2nc.py

usage: png2nc.py

Converts test_topo.png to test_topo.nc for use as a test input file for topogtools deseas.

Building and Installation

General Instructions

Prerequisites

To compile these tools one needs:

  • Fortran compiler
  • netCDF-Fortran
  • CMake

Step-by-step instructions

domain-tools uses CMake for building and installation. Therefore the procedure to build the sources and install the executables is fairly standard:

git clone https://github.com/COSIMA/domain-tools.git
cd domain-tools
cmake -B build -DCMAKE_BUILD_TYPE=Release
cmake --build build
cmake --install build --prefix=<directory where to install the tools>

Gadi

An installation of these tools is available on Gadi. To use it, you need to be a member of group ik11 and load the corresponding module:

module use /g/data/ik11/spack/modules
module load domain-tools

If instead you wish to build and install the tools from the sources, you can follow a slighly modified version of above step-be-step instructions:

module load intel-compiler netcdf
export NetCDF_ROOT=$(nc-config --prefix)
git clone https://github.com/COSIMA/domain-tools.git
cd domain-tools
cmake -B build -DCMAKE_BUILD_TYPE=Release -DNetCDF_Fortran_LIBRARY=$NetCDF_ROOT/lib/Intel/libnetcdff.so -DNetCDF_C_LIBRARY=$NetCDF_ROOT/lib/libnetcdf.so -DNetCDF_Fortran_INCLUDE_DIRS=$NetCDF_ROOT/include/Intel
cmake --build build
cmake --install build --prefix=<directory where to install the tools>