Because although I input the capital letters of "NAVC", it will be changed to small letters "navc", so I can't change CCP via DLT tool successfully.

[songsong88]

Error Description:
when I try to change the CCP via DLT tool, when I input the capital letters of "NAVC", it will change to small letters "navc", so I can't change CCP via DLT tool successfully.
However, in daily testing ,we always need to use the tool to change CCP.
So please help to fix this issue ,thanks!

[songsong88]

Let me add more information ,when we try to change CCP via DLT Tool, we need select "send injection" at first ,then we need input "NAVC" to Application ID;
input "BLPS" to Context ID;
input ""8002 to Service ID;
at the end , need input the corresponding longitude and dimensions into the "data"(delete the",")

As from the details ,you can check the below content ,thanks!

• When we try to change the CCP of the car, we follow the steps below:

1.open "dlt viewer shortcut"software
2.connect current HU-->Set current HU IP
3.after the connect established, tap “config” then you need right click on the line “ECU Online” and select: **send injection**

4.next you will go to the following page:

5. Paste the correct longitude and dimensions into the "data"(delete the",")
6.Click ok, then the CCP should be changed accordingly.

[alexmucde]

As a quick fix, you have to remove "navc" from the c:\users\xxxx.dlt\config\config.ini, when DLT Viewer is not running, then Restart.

As a long term issue this must be fixed.

[alexmucde]

The completer in the ComboBox in Qt is not working well. Even Noncasesensitive will not work. Disabled Completer in linked PR.