temperature_grid.h

#ifndef __TEMPERATURE_GRID_H_
#define __TEMPERATURE_GRID_H_

/* grid model differs from the block model in its use of
 * a mesh of cells whose resolution is configurable. unlike 
 * the block model, it can also model a stacked 3-D chip,
 * with each layer having a different floorplan. information
 * about the floorplan and the properties of each layer is
 * input in the form of a layer configuration file. 
 */
#include "temperature.h"

#if SUPERLU > 0
/* Lib for SuperLU */
#include "slu_ddefs.h"
#endif

/* layer configuration file constants */
#define LCF_NPARAMS		7	/* no. of parameters per layer	*/
#define LCF_SNO				0	/* serial number	*/
#define LCF_LATERAL		1	/* has lateral heat flow?	*/
#define LCF_POWER			2	/* dissipates power?	*/
#define LCF_SP				3	/* specific heat capacity	*/
#define LCF_RHO				4	/* resistivity	*/
#define LCF_THICK			5	/* thickness	*/
#define LCF_FLP				6	/* floorplan file	*/

/* vector types - power / temperature	*/
#define V_POWER				0
#define V_TEMP				1

/* default no. of chip layers (excluding spreader 
 * and sink). used when LCF file is not specified
 */
#define DEFAULT_CHIP_LAYERS	2
#define LAYER_SI			      0
#define LAYER_INT			      1

/* layers of secondary path with same area as die */
#define SEC_CHIP_LAYERS	2
#define LAYER_C4	      0
#define LAYER_METAL     1

/* default no. of package layers	*/
#define DEFAULT_PACK_LAYERS	2
#define LAYER_SP			      0
#define LAYER_SINK			    1

/* additional package layers from secondary path */
#define SEC_PACK_LAYERS	3
#define LAYER_PCB	      0
#define LAYER_SOLDER	  1
#define LAYER_SUB	      2

/* Occupancy threshold for border-cell calculation.
   Effective only when the detailed 3D modeling is turned on. */
#define OCCUPANCY_THRESHOLD 0.95

/* block list: block to grid mapping data structure.
 * list of blocks mapped to a grid cell	
 */
typedef struct blist_t_st
{
  /* index of the mapped block	*/
  int idx;
  /* ratio of this block's area within the grid cell 
   * to the total area of the grid cell
   */
  double occupancy;
  /* next block mapped to the same cell	*/
  struct blist_t_st *next;
  //BU_3D: The following variables contain the grid specific conductances
  int lock, hasRes,hasCap;/*lock: is occupancy >OCCUPANCY_THRESHOLD% lock the thermal resistance values */
  /*hasRes: integer(1 or 0) to see if grid has grid specific resistance */
  /*hasCap: integer(1 or 0) to see if grid has grid specific Capacitance */
  double rx,ry,rz;//Thermal Resistance in x,y,z directions
  double capacitance;//Thermal Capacitance
  //end->BU_3D
}blist_t;

/* grid list: grid to block mapping data structure.
 * start and end indices of grid cells in a block
 * (both in the x and y directions)
 */
typedef struct glist_t_st
{
  /* start index in the y direction	*/
  int i1;
  /* end index in the y direction + 1	*/
  int i2;
  /* start index in the x direction	*/
  int j1;
  /* end index in the x direction + 1	*/
  int j2;
} glist_t;

/* one layer of the grid model. a 3-D chip is a stacked
 * set of layers
 */
typedef struct layer_t_st 
{
  /* floorplan */
  flp_t *flp;

  /* configuration parameters	*/
  int no;				/* serial number	*/
  int has_lateral;	/* model lateral spreading of heat?	*/
  int has_power;		/* dissipates power?	*/
  double k;			/* 1/resistivity	*/
  double thickness;
  double sp;			/* specific heat capacity	*/

  /* extracted information	*/
  double rx, ry, rz;	/* x, y and z resistors	*/
  double c;			      /* capacitance	*/

  /* block-grid map - 2-d array of block lists	*/
  blist_t ***b2gmap;
  /* grid-block map - a 1-d array of grid lists	*/
  glist_t *g2bmap;
}layer_t;

/* grid model's internal vector datatype	*/
typedef struct grid_model_vector_t_st
{
  /* 3-d grid of nodes	*/
  double ***cuboid;
  /* extra spreader and sink  nodes	*/
  double *extra;
}grid_model_vector_t;

/* grid thermal model	*/
typedef struct grid_model_t_st
{
  /* configuration	*/
  thermal_config_t config;

  /* layer information	*/
  layer_t *layers;
  int n_layers;

  /* grid resolution	*/
  int rows;
  int cols;
  /* dimensions	*/
  double width;
  double height;

  /* package parameters	*/
  package_RC_t pack;

  /* sum total of the functional blocks of all floorplans	*/
  int total_n_blocks;
  /* grid-to-block mapping mode	*/
  int map_mode;

  /* flags	*/
  int r_ready;	/* are the R's initialized?	*/
  int c_ready;	/* are the C's initialized?	*/
  int has_lcf;	/* LCF file specified?		*/

  /* internal state - most recently computed 
   * steady state temperatures
   */
  grid_model_vector_t *last_steady;
  /* internal state - most recently computed 
   * transient temperatures
   */
  /* grid cell temperatures	*/
  grid_model_vector_t *last_trans;
  /* block temperatures	*/
  double *last_temp;

  /* to allow for resizing	*/
  int base_n_units;
}grid_model_t;

//BU_3D: Functions used to retrieve data from the det3D_grid_reference structure
double find_res_3D(int n, int i, int j, grid_model_t *model, int choice);
double find_cap_3D(int n, int i, int j, grid_model_t *model);	
/* constructor/destructor */
grid_model_t *alloc_grid_model(thermal_config_t *config, flp_t *flp_default, 
                               int do_detailed_3D);//BU_3D: added do_detailed_3D
void delete_grid_model(grid_model_t *model);

/* initialization	*/
void populate_R_model_grid(grid_model_t *model, flp_t *flp);
void populate_C_model_grid(grid_model_t *model, flp_t *flp);

/* hotspot main interfaces - temperature.c	*/
void steady_state_temp_grid(grid_model_t *model, double *power, double *temp);
void compute_temp_grid(grid_model_t *model, double *power, double *temp, double time_elapsed);

/* differs from 'dvector()' in that memory for internal nodes is also allocated	*/
double *hotspot_vector_grid(grid_model_t *model);
/* copy 'src' to 'dst' except for a window of 'size'
 * elements starting at 'at'. useful in floorplan
 * compaction
 */
void trim_hotspot_vector_grid(grid_model_t *model, double *dst, double *src, 
                              int at, int size);
/* update the model's node count	*/						 
void resize_thermal_model_grid(grid_model_t *model, int n_units);
void set_temp_grid (grid_model_t *model, double *temp, double val);
void dump_top_layer_temp_grid(grid_model_t *model, char *file, grid_model_vector_t *temp);
void dump_steady_temp_grid (grid_model_t *model, char *file);
void dump_temp_grid (grid_model_t *model, double *temp, char *file);
void copy_temp_grid (grid_model_t *model, double *dst, double *src);
void read_temp_grid (grid_model_t *model, double *temp, char *file, int clip);
void dump_power_grid(grid_model_t *model, double *power, char *file);
void read_power_grid (grid_model_t *model, double *power, char *file);
double find_max_temp_grid(grid_model_t *model, double *temp);
double find_avg_temp_grid(grid_model_t *model, double *temp);
double calc_sink_temp_grid(grid_model_t *model, double *temp, thermal_config_t *config);

/* grid_model_vector routines	*/
/* constructor	*/
grid_model_vector_t *new_grid_model_vector(grid_model_t *model);
/* destructor	*/
void free_grid_model_vector(grid_model_vector_t *v);
/* translate power/temperature between block and grid vectors	*/
void xlate_vector_b2g(grid_model_t *model, double *b, grid_model_vector_t *g, int type);
/* translate temperature between grid and block vectors	*/
void xlate_temp_g2b(grid_model_t *model, double *b, grid_model_vector_t *g);
/* debug print	*/
void debug_print_grid(grid_model_t *model);

#if SUPERLU > 0
/* steady-state solver */
void direct_SLU(grid_model_t *model, grid_model_vector_t *power, grid_model_vector_t *temp);
SuperMatrix build_steady_grid_matrix(grid_model_t *model);
SuperMatrix build_steady_rhs_vector(grid_model_t *model, grid_model_vector_t *power, double **rhs);
#endif

#endif