Application notes collect many small topics about using openwifi in different scenarios/modes.
- Use openwifi on the w-iLab.t testbed remotely
- Communication between two SDR boards under AP and client mode
- Communication between two SDR boards under ad-hoc mode
- From CSI (Channel State Information) to CSI (Chip State Information)
- WiFi CSI radar via self CSI capturing
- Capture IQ sample, AGC gain, RSSI with many types of trigger condition
- Capture dual antenna TX/RX IQ for multi-purpose (capture collision)
- WiFi packet, CSI and IQ sample self loopback test (over-the-air and FPGA internal)
- IEEE 802.11n (Wi-Fi 4)
- 802.11 packet injection and fuzzing
- CSI fuzzer
- Access counter/statistics in FPGA
- Access counter/statistics in driver
- Frequent/usual trick on controlling Gain/Att/Frequency/CCA/LBT/CSMA/CW/Sensitivity/etc
- Driver and FPGA dynamic reloading
- owfuzz: a WiFi protocol fuzzing tool using openwifi. [Vulnerabilities]
- Build FPGA with High-Level Synthesis modules