wacom_iv_1_0_to_1_1.md

Wacom IV 1.0-1.1:

Usage

• Follow General Usage

• Run KuuubeTD/wacom_iv_1_0_to_1_1_driver.py

Notes

Settings Command Applied by Driver:

~*F233C900,000,00,1270,1270

Setting Header

ASCII: ~*

~*: Header of settings command

Setting Body

Hex: F233C900 Binary: 11110010001100111100100100000000

11 command set: WACOM IV

11 baud rate: 19200

00 parity: none

1 data length: 8 bits

0 stop bits: 1 stop bit

00 CTS/DSR: none

11 data transfer mode: stream

0 output format: binary

0 coordinate system: absolute

11 transfer rate: maximum

11 resolution: 1270 lpi

0 origin location: upper left

0 out-of-range data: no

10 terminator: carriage return + line feed

0 not used

1 PnP: on

0 pressure sensitivity: firm

0 reading height: high

0 multi device mode: disabled

0 tilt mode: off

0 MM command set: MM1201

0 MM961 orientation: landscape

0 BitPad II cursor data: 1234

0 remote mode: off

Setting Tail

ASCII: ,000,00,1270,1270

000 increment: 0

00 interval: 0

1270 x-resolution: 1270

1270 y-resolution: 1270