diff --git a/wiki/gm300.md b/wiki/gm300.md
new file mode 100644
index 0000000..32cedac
--- /dev/null
+++ b/wiki/gm300.md
@@ -0,0 +1,12 @@
+# Hardware modifications
+
+There are 2 things to do:
+
+    Solder a 100k THT resistor in parallel with R552
+    Move jumper JU551 to position A
+
+Optionally, you can cut open pin 4 of the power amplifier IC. This allows an access to the internal speaker via 
+pins 1 and 15 on the back of the radio. JU551 jumper is visible on the left side, between an electrolytic 
+capacitor and 2 (MKP?) blue ones.
+
+![Image of the area on a GM300 mainboard on where to make the modification.](gm300_mod.png)