GPIO service not installed properly via One-Line-Installer and also not re-installable

[ifritsultan]

Hi everyone,

my specification is the following:

• RPi 3B
• Raspbian GNU/Linux 12 (bookworm) - LITE 32BIT Image
• Jukebox Version 2.7.0
• Installed via One-Line-Installer
• In general GPIOs work. (has been tested I/O with separate script)

I have problem with the GPIO module. I used the One-Line-Installer and GPIO module did not work. So I tried to reinstall it via /components/gpio-control/install.sh.
That code ran into an error and gave me the suggestion to check the GPIO module via
python gpio_control.py

The result was the following error

INFO:__main__:GPIO`` Started
INFO:__main__:['VolumeControl', 'RotaryVolumeControl', 'PrevNextControl', 'PlayPause', 'Shutdown', 'PauseShutdown', 'Volume0', 'VolumeUp', 'VolumeDown', 'NextSong', 'PrevSong', 'FastForward', 'Rewind', 'Halt', 'RFIDDevice', 'TriggerPlayCard1', 'TriggerPlayFolderSomeRelativeFolderName', 'StatusLED']
INFO:__main__:Device VolumeControl not enabled
INFO:__main__:Device RotaryVolumeControl not enabled
INFO:__main__:Device PrevNextControl not enabled
INFO:__main__:adding GPIO-Device, PlayPause
PlayPause
Traceback (most recent call last):
  File "/home/pi/RPi-Jukebox-RFID/components/gpio_control/gpio_control.py", line 140, in <module>
    devices = gpio_control_class.get_all_devices(config)
              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/pi/RPi-Jukebox-RFID/components/gpio_control/gpio_control.py", line 108, in get_all_devices
    device = self.generate_device(config[section], section)
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/pi/RPi-Jukebox-RFID/components/gpio_control/gpio_control.py", line 62, in generate_device
    return SimpleButton(config.getint('Pin'),
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/pi/RPi-Jukebox-RFID/components/gpio_control/GPIODevices/simple_button.py", line 93, in __init__
    GPIO.add_event_detect(self.pin, edge=self.edge, callback=self.callbackFunctionHandler,
RuntimeError: Failed to add edge detection

Can anyone help me? How can I restore the GPIO functionality after full One-Line-Installer procedure?

Best
Matthias