This repository contains open hardware designed by Luxonis. The BW0250TG is a carrier board for the Sunny TG161B or AN01V32 OV9282 camera module, and is designed to be compatible with the BW1094 and BW1098FFC baseboards. A 20-pin FFC is used to carry 5V power, 2-lane MIPI, I2C, and other control signals between the BW0250TG and the controller baseboards. A single BG0250TG is typically paired with another to create a stereo camera pair.
PCBcontains the packaged Altium project filesDocscontains project output filesImagescontains graphics for readme and reference3D Modelscontains generated mechanical models for the board
- 20 pin 0.5mm FFC interconnect to baseboard
- 24 pin interface to OV9282 camera module
- 2-lane MIPI
- Aux/Control signals to camera module
- 5V power input via FFC
- On-board power generation for camera module
- Design files produced with Altium Designer 20
Camera module compatibility is known for the Sunny TG161B and AN01V32, but not tested for other modules. The FFC interface is an 0.5mm pitch, 20-pin, and bottom-contact connector, across which travels the 2-lane MIPI, 5V, I2C, camera clock, camera reset, and other optional control lines. 5V power is regulated down and filtered as appropriate to meet the requirements of the compact camera module and OV9282.
These files represent the R0M0E0 revision of this project. Please refer to schematic page, Project_Information.SchDoc for full details of revision history.