Caution: This project is still under development. We are currently in process of getting our board prototyped and tested. We are proactively making our design available for our uses to plan and provide us with design feedback.
This repository contains open hardware designed by Luxonis. The DM0250TG_R1M1E1 is a carrier board for the Sunny TG161B or AN01V32 OV9282 camera module, and is designed to be compatible with new version of FFC base boards which is DM1090FFC. A single DM0250TG is typically paired with another to create a stereo camera pair. In this version of 0250TG carrier board no outer dimensions or mounting holes were changed. Reason for change was having same 26-pin FFC pinout on all camera connectors and being able to attach cameras with 22pin RPi pinout to DM1090FFC with use of custom FFC from Arducam.
PCBcontains the packaged Altium project filesDocscontains project output filesImagescontains graphics for readme and reference3D Modelscontains generated mechanical models for the board
- 26 pin 0.5mm FFC interconnect to baseboard
- 24 pin interface to OV9282 camera module
- 2-lane MIPI
- Aux/Control signals to camera module
- 3.3V power input via FFC
- On-board power generation for camera module
- Design files produced with Altium Designer 20
Camera module compatibility is known for the Sunny TG161B and AN01V32, but not tested for other modules. The FFC interface is an 0.5mm pitch, 26-pin, and bottom-contact connector, across which travels the 2-lane MIPI, 3.3V, I2C, camera clock, camera reset, and other optional control lines. 3.3V power is regulated down and filtered as appropriate to meet the requirements of the compact camera module and OV9282.
These files represent the R1M1E1 revision of this project. Please refer to schematic page, Project_Information.SchDoc for full details of revision history.