We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
If I used this file:
!EvalModel parameters: [test, lithostaticStress, b_xx, b_yy, b_xy, b_yz, b_xz, gamma] model: !Switch [test]: !AffineMap matrix: z: [0.0, 0.0, 1.0] translation: z: 0 components: - !FunctionMap map: test: return z; [lithostaticStress, b_xx, b_yy, b_zz, b_xy, b_yz, b_xz,gamma,Omega]: !ConstantMap map: lithostaticStress: 0.974 b_xx: 0.974 b_yy: 0.974 b_zz: 0.974 b_xy: 0.974 b_yz: 0.974 b_xz: 0.974 gamma: 0.974 components: !FunctionMap map: s_zz: return lithostaticStress; s_xx: return lithostaticStress; s_yy: return lithostaticStress; s_xy: return lithostaticStress; s_yz: return lithostaticStress; s_xz: return lithostaticStress; bulkFriction: | return test; plastCo: | return test;
And plot bulkFriction against z, I get, as expected:
z bulkFriction -100 -100 -200 -200 -300 -300 -400 -400
Now same file, with one more parameter:
!EvalModel parameters: [test, lithostaticStress, b_xx, b_yy, b_xy, b_yz, b_xz, gamma, Omega] model: !Switch [test]: !AffineMap matrix: z: [0.0, 0.0, 1.0] translation: z: 0 components: - !FunctionMap map: test: return z; [lithostaticStress, b_xx, b_yy, b_zz, b_xy, b_yz, b_xz,gamma,Omega]: !ConstantMap map: lithostaticStress: 0.974 b_xx: 0.974 b_yy: 0.974 b_zz: 0.974 b_xy: 0.974 b_yz: 0.974 b_xz: 0.974 gamma: 0.974 Omega: 0.974 components: !FunctionMap map: s_zz: return lithostaticStress; s_xx: return lithostaticStress; s_yy: return lithostaticStress; s_xy: return lithostaticStress; s_yz: return lithostaticStress; s_xz: return lithostaticStress; bulkFriction: | return test; plastCo: | return test;
and I get:
-100 2.16654e-317 -200 2.16654e-317 -300 2.16654e-317 -400 2.16654e-317
The text was updated successfully, but these errors were encountered:
Issue is with ImpalaJIT. Could not find the bug. -> Should switch to something else.
Sorry, something went wrong.
I need more than 8 parameters as well. Hope this could be fixed:-)
Maybe we could include Lua as an alternative to ImpalaJIT. There we wouldn't have such a limitation.
Here is an example of workaround: https://gitlab.lrz.de/thomas.ulrich/ridgecrest_setup/-/blob/master/SeisSolSetup/Ridgecrest_andersonian_stress_bij_cij.yaml
No branches or pull requests
If I used this file:
And plot bulkFriction against z, I get, as expected:
Now same file, with one more parameter:
and I get:
The text was updated successfully, but these errors were encountered: