🌟 LILYGO Camera Project🌟

📷 Product

Pin table	Product	schematic	Status
T-SIMCAM	aliexpress	T_SIMCAM	✅
T-Carmer V1.6.2	Obsolete	T-Carmer V1.6.2	❌
T-Carmer V1.7	Obsolete	T-Carmer V1.7	❌
T-Camera Mini	Obsolete	T-Camera Mini	❌
T-Camera Plus	aliexpress	T-Camera Plus	✅
T-Joranl	aliexpress	T-Joranl	✅
T-Carmer V1.6	Obsolete	Obsolete	❌
T-Carmer V0.5	Obsolete	Obsolete	❌

Install Visual Studio Code and Python
Search for the PlatformIO plugin in the VisualStudioCode extension and install it.
After the installation is complete, you need to restart VisualStudioCode
After restarting VisualStudioCode, select File in the upper left corner of VisualStudioCode -> Open Folder -> select the LilyGo-Camera-Series directory
Wait for the installation of third-party dependent libraries to complete
Click on the platformio.ini file, and in the platformio column
Select the board name you want to use in default_envs and uncomment it.
Uncomment one of the lines src_dir = xxxx to make sure only one line works
Click the (✔) symbol in the lower left corner to compile
Connect the board to the computer USB
Click (→) to upload firmware
Click (plug symbol) to monitor serial output
If it cannot be written, or the USB device keeps flashing, please check the FAQ below