Skip to content

Latest commit

 

History

History
76 lines (52 loc) · 2.03 KB

README.md

File metadata and controls

76 lines (52 loc) · 2.03 KB
Raw

ROS Packages for Hunter Mobile Base

Packages

  • hunter_base: a ROS wrapper around Hunter SDK to monitor and control the robot
  • hunter_bringup: launch and configuration files to start ROS nodes
  • hunter_msgs: hunter related message definitions

Communication interface setup

Please refer to the README of "ugv_sdk" package for setup of communication interfaces.

Note on CAN interface on Nvidia Jetson Platforms

Nvidia Jeston TX2/Xavier/XavierNX have CAN controller(s) integrated in the main SOC. If you're using a dev kit, you need to add a CAN transceiver for proper CAN communication.

Basic usage of the ROS package

  1. Install dependent packages

    $ sudo apt install -y ros-$ROS_DISTRO-teleop-twist-keyboard

  2. Clone the packages into your catkin workspace and compile

    (the following instructions assume your catkin workspace is at: ~/catkin_ws/src)

    $ cd ~/catkin_ws/src
$ git clone https://github.com/agilexrobotics/ugv_sdk.git
$ git clone https://github.com/agilexrobotics/hunter_ros.git
$ cd ..
$ catkin_make

  3. Setup CAN-To-USB adapter

  • Enable gs_usb kernel module(If you have already added this module, you do not need to add it)

    $ sudo modprobe gs_usb

  • first time use hunter-ros package

    $ rosrun hunter_bringup setup_can2usb.bash

  • if not the first time use hunter-ros package(Run this command every time you turn off the power)

    $ rosrun hunter_bringup bringup_can2usb.bash

  • Testing command

    # receiving data from can0
$ candump can0
  1. Launch ROS nodes

  • Start the base node for the real robot

    $ roslaunch hunter_bringup hunter_robot_base.launch

  • Start the keyboard node to control the real robot

    $ roslaunch hunter_bringup hunter_teleop_keyboard.launch

SAFETY PRECAUSION:

Always have your remote controller ready to take over the control whenever necessary.