Skip to content

Latest commit

 

History

History
129 lines (108 loc) · 5.88 KB

CHANGELOG.md

File metadata and controls

129 lines (108 loc) · 5.88 KB
Raw

Changelog

All notable changes to this project are documented in this file.

[1.4.0] - 2018-11-30

Added

  • Added the nrfx_is_word_aligned() function for checking whether an address is word-aligned.
  • Added HAL for ACL.
  • Added functions for disabling and re-enabling interrupts in the SWI driver.
  • Added possibility to completely remove interrupt handling from the WDT driver.

Changed

  • Updated the documentation for the nrfx_uarte_rx() function. It now correctly reflects the actual behavior of the function.

Fixed

  • Corrected the type of the nrfx_uarte_xfer_evt_t structure field that holds the amount of transferred bytes.
  • Corrected the way of disabling interrupts in the NFCT driver when moving the peripheral to the disabled state.
  • Fixed a typo in the name of the bmRequest field in the nrfx_usbd_setup_t structure. The new correct name is bRequest.
  • Fixed the nrfx_ppi_channel_fork_assign() function. It now accepts also pre-programmed channels.
  • Fixed handling of long custom instruction responses in the QSPI driver.
  • Fixed a bug affecting the conversion of time to ticks in the TIMER HAL.

[1.3.1] - 2018-09-28

Fixed

  • Corrected the type of nrfx_usbd_ep_status_get() return value.
  • Corrected calls to undefined macros in NFCT and USBD drivers.

[1.3.0] - 2018-09-21

Added

  • Added HAL and driver for NFCT.
  • Added driver for USBD.
  • Added function for setting the burst mode in the SAADC HAL.
  • Added the NRFX_ARRAY_SIZE macro.

Changed

  • Moved the implementation of nrfx_power_clock_irq_handler() to nrfx_power.c, removed nrfx_power_clock.c.

Fixed

  • Replaced ARRAY_SIZE macro calls with NRFX_ARRAY_SIZE ones.

[1.2.0] - 2018-09-06

Added

  • Added function for checking if a specific channel is enabled in the GPIOTE HAL.
  • Added support for using the QDEC driver without LED.
  • Added functions for modifying only the event endpoint or only the task endpoint in the PPI HAL.
  • Added function for reading the pin pull configuration in the GPIO HAL.

Changed

  • Corrected ISOSPLIT enumerator names in the USBD HAL.

Fixed

  • Fixed a double buffering bug that occurred in the UARTE driver after the RX abort.
  • Fixed the TXRX transfers in the TWIM driver. They can now be started after transfers that are not ended with the stop condition.

[1.1.0] - 2018-06-15

Added

  • Implemented workaround for nRF52832 and nRF52840 anomaly 194 in the I2S driver.
  • Implemented workaround for nRF52840 anomaly 195 in the SPIM driver.
  • Added HALs for CCM, ECB, and RADIO.
  • Extended HALs for GPIO, PPI, SAADC, and USBD.
  • Added support for external LFCLK sources.

Changed

  • Corrected handling of transfer lengths in the TWI driver.
  • Updated MDK to version 8.17.0.

Fixed

  • Fixed logging in the PPI driver.
  • Fixed SPIM interrupt definition for nRF52810.
  • Fixed Slave Select configuration in the SPIM driver.
  • Corrected default settings for NRF_SPIM3.
  • Fixed a typo in the UARTE TXDRDY event definition.
  • Corrected the TIMEOUT event clearing in the WDT interrupt handler.

[1.0.0] - 2018-03-21

Added

  • Added the NRFX_WAIT_FOR macro to improve the time-out functionality in QSPI and SAADC drivers.
  • Added glue layer macros for checking and modifying the pending status of interrupts.
  • Added new enumeration values for interrupts and events in the UARTE HAL.
  • Implemented workarounds for nRF52 anomalies 192 and 201 in the CLOCK driver.
  • Implemented workaround for nRF52840 anomaly 122 in the QSPI driver.
  • Implemented workaround for nRF52840 anomaly 198 in the SPIM driver.

Changed

  • Updated MDK to 8.16.0.
  • Extended input pin configuration in the GPIOTE driver.
  • Unified the way of checking if a required event handler was provided. Now, all drivers do it with assertions.
  • Changed the RNG bias correction configuration option to be enabled by default.
  • Refactored the ADC driver and HAL.
  • Corrected assertions in the TIMER driver to make it usable in debug version with PPI.
  • Improved buffer handling in the I2S driver. The API of the driver has been slightly modified.
  • Enhanced SPIS driver API: added the "p_context" parameter, allowed NULL pointers for zero-length buffers.

Fixed

  • Fixed result value casting in the TEMP HAL.
  • Fixed types of conversion result and buffer size in the ADC HAL and driver.
  • Fixed time-out in the SAADC driver in abort function.

[0.8.0] - 2017-12-20

Added

  • Added XIP support in the QSPI driver.
  • Implemented Errata 132 in the CLOCK driver.
  • Added function for checking if a TIMER instance is enabled.
  • Added extended SPIM support.

Changed

  • Updated MDK to 8.15.0. Introduced Segger Embedded Studio startup files.
  • Updated drivers: COMP, PWM, QDEC, SAADC, SPIS, TIMER, TWI, TWIS.
  • Changed the type used for transfer lengths to 'size_t' in drivers: SPI, SPIM, SPIS, TWI, TWIM, TWIS, UART, UARTE. Introduced checking of EasyDMA transfers limits.
  • Updated HALs: COMP, NVMC, UART, UARTE, USBD.
  • Updated template files and documentation of configuration options.

Fixed

  • Fixed TWI and TWIM drivers so that they now support GPIOs from all ports.
  • Fixed definitions related to compare channels in the TIMER HAL.

Removed

  • Removed the possibility of passing NULL instead of configuration to get default settings during drivers initialization.
  • Removed support for UART1 and PRS box #5.

[0.7.0] - 2017-10-20

Added

  • This CHANGELOG.md file.
  • README.md file with simple description and explanations.
  • HAL for: ADC, CLOCK, COMP, ECB, EGU, GPIO, GPIOTE, I2S, LPCOMP, NVMC, PDM, POWER, PPI, PWM, QDEC, QSPI, RNG, RTC, SAADC, SPI, SPIM, SPIS, ARM(R) SysTick, TEMP, TIMER, TWI, TWIM, TWIS, UART, UARTE, USBD, WDT.
  • Drivers for: ADC, CLOCK, COMP, GPIOTE, I2S, LPCOMP, PDM, POWER, PWM, QDEC, QSPI, RNG, RTC, SAADC, SPI, SPIM, SPIS, ARM(R) SysTick, TIMER, TWI, TWIM, TWIS, UART, UARTE, WDT.
  • Allocators for: PPI, SWI/EGU.
  • MDK in version 8.14.0.
  • Offline documentation for every added driver and simple integration description.
  • Template integration files.