110 instead of 122 bytes?

[reviscan]

Hi
I have a 6 x US2000B batterie pack.
Compile of the code worked.
Also my 6 batteries are detected.

here is the output ( do you need a other verbose level?)
./pylontech -d /dev/ttyUSB0 -b 115200 --verbose 4
6 devices found in group 0

                                                ---------pack--------- -cell voltage- -temperature-

manufacturer model serial charge voltage current min max min max

1 Pylon---------------US2KBPL PPTBH02209612520 GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
2 Pylon---------------US2KBPL PPTBH02209612374 GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
3 Pylon---------------US2KBPL PPTBH02209612365 GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
4 Pylon---------------US2KBPL PPTBH02209612548 GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
5 Pylon---------------US2KBPL PPTBH02209612363 GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
6 Pylon---------------US2KBPL PPTBH02209612369 GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors
GetAnalogValue: expected to receive 122 bytes of data but got only 110 bytes
sendCommandAndReceive: Closing and reopening /dev/ttyUSB0 due to communication errors

total capacity 0 AH (~ 0.00 kWh, 0.00 KWh per module)
emaining capacity 0 AH ( 0.00 kWh, 0.00 KWh per module)
total current 0.00 A ( 0.00 kW)

any idear?

Many Thanx!