We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[7.137 637] [SFUD](../../middlewares/sfud/src/sfud.c:117) Start (SFUD) V1.1.0. [SFUD](../../middlewares/sfud/src/sfud.c:872) The flash device manufacturer ID is 0xEF, memory type ID is 0x40, capacity ID is 0x16. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:132) Check SFDP header is OK. The reversion is V1.5, NPN is 0. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:175) Check JEDEC basic flash parameter header is OK. The table id is 0, re version is V1.5, length is 16, parameter table pointer is 0x000080. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:203) JEDEC basic flash parameter table info: [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:204) MSB-LSB 3 2 1 0 [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0001] 0xFF 0xF9 0x20 0xE5 [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0002] 0x01 0xFF 0xFF 0xFF [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0003] 0x6B 0x08 0xEB 0x44 [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0004] 0xBB 0x42 0x3B 0x08 [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0005] 0xFF 0xFF 0xFF 0xFE [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0006] 0x00 0x00 0xFF 0xFF [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0007] 0xEB 0x40 0xFF 0xFF [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0008] 0x52 0x0F 0x20 0x0C [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:207) [0009] 0x00 0x00 0xD8 0x10 [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:215) 4 KB Erase is supported throughout the device. Command is 0x20. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:234) Write granularity is 64 bytes or larger. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:245) Target flash status register is non-volatile. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:271) 3-Byte only addressing. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:305) Capacity is 4194304 Bytes. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:312) Flash device supports 4KB block erase. Command is 0x20. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:312) Flash device supports 32KB block erase. Command is 0x52. [SFUD](../../middlewares/sfud/src/sfud_sfdp.c:312) Flash device supports 64KB block erase. Command is 0xD8. [SFUD]Found a Winbond flash chip. Size is 4194304 bytes. [SFUD](../../middlewares/sfud/src/sfud.c:850) Flash device reset success. [SFUD]W25Q32JVSIQ flash device initialized successfully.
QSPI未测试,直接使用W25Q32BV的参数初始化也可以用。
#define SFUD_FLASH_DEVICE_TABLE \ { \ [SFUD_W25Q32BV_DEVICE_INDEX] = {.name = "W25Q32JVSIQ", .spi.name = "SPI2", .chip = {"W25Q32BV", SFUD_MF_ID_WINBOND, 0x40, 0x16, 4L*1024L*1024L, SFUD_WM_PAGE_256B, 4096, 0x20}}, \ }
The text was updated successfully, but these errors were encountered:
No branches or pull requests
QSPI未测试,直接使用W25Q32BV的参数初始化也可以用。
The text was updated successfully, but these errors were encountered: