From cac1949e3a1e3073b1ece7fc1ac05163ae81b520 Mon Sep 17 00:00:00 2001
From: Aiden <891483489@qq.com>
Date: Fri, 20 Sep 2024 10:33:43 +0800
Subject: [PATCH] add without relay plug

---
 .github/workflows/ci.yml      |   1 +
 .github/workflows/publish.yml |   3 +-
 athom-without-relay-plug.yaml | 325 ++++++++++++++++++++++++++++++++++
 3 files changed, 328 insertions(+), 1 deletion(-)
 create mode 100644 athom-without-relay-plug.yaml

diff --git a/.github/workflows/ci.yml b/.github/workflows/ci.yml
index 9059bd0..33dd636 100644
--- a/.github/workflows/ci.yml
+++ b/.github/workflows/ci.yml
@@ -31,6 +31,7 @@ jobs:
           - athom-sw03.yaml
           - athom-sw04.yaml
           - athom-wall-outlet.yaml
+          - athom-without-relay-plug.yaml
     steps:
       - name: Checkout source code
         uses: actions/checkout@v4.1.7
diff --git a/.github/workflows/publish.yml b/.github/workflows/publish.yml
index 03587a6..51ace1b 100644
--- a/.github/workflows/publish.yml
+++ b/.github/workflows/publish.yml
@@ -31,6 +31,7 @@ jobs:
         athom-sw02.yaml,
         athom-sw03.yaml,
         athom-sw04.yaml,
-        athom-wall-outlet.yaml
+        athom-wall-outlet.yaml,
+        athom-without-relay-plug.yaml
       # CHANGEME: Set the name of your project here:
       name: Athom ESP8285 Device
\ No newline at end of file
diff --git a/athom-without-relay-plug.yaml b/athom-without-relay-plug.yaml
new file mode 100644
index 0000000..af2ec1c
--- /dev/null
+++ b/athom-without-relay-plug.yaml
@@ -0,0 +1,325 @@
+substitutions:
+  name: "athom-without-relay-plug"
+  friendly_name: "Smart Plug"
+  # Allows ESP device to be automatically lined to an 'Area' in Home Assistant. Typically used for areas such as 'Lounge Room', 'Kitchen' etc
+  room: ""
+  device_description: "athom esp8285 without relay plug"
+  project_name: "Athom Technology.Athom Without Relay Plug"
+  project_version: "v2.0.5"
+  sensor_update_interval: "10s"
+  # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
+  dns_domain: ""
+  # Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
+  timezone: ""
+  # Set the duration between the sntp service polling ntp.org servers for an update
+  sntp_update_interval: "6h"
+  # Network time servers for your region, enter from lowest to highest priority. To use local servers update as per zones or countries at: https://www.ntppool.org/zone/@
+  sntp_server_1: "0.pool.ntp.org"
+  sntp_server_2: "1.pool.ntp.org"
+  sntp_server_3: "2.pool.ntp.org"  
+  # Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
+  wifi_fast_connect: "false"
+  # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
+  log_level: "INFO"
+  # Enable or disable the use of IPv6 networking on the device
+  ipv6_enable: "false"
+  # Hide the ENERGY sensor that shows kWh consumed, but with no time period associated with it. Resets when device restarted and reflashed.
+  hide_energy_sensor: "false"
+
+esphome:
+  name: "${name}"
+  friendly_name: "${friendly_name}"
+  comment: "${device_description}"
+  area: "${room}"
+  name_add_mac_suffix: true
+  min_version: 2024.6.0
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+ 
+esp8266:
+  board: esp8285
+  restore_from_flash: true
+
+preferences:
+  flash_write_interval: 5min
+
+api:
+
+ota:
+  - platform: esphome
+
+logger:
+  level: ${log_level}
+  baud_rate: 0
+
+mdns:
+  disabled: false
+
+web_server:
+  port: 80
+
+network:
+  enable_ipv6: ${ipv6_enable}
+
+wifi:
+  # This spawns an AP with the device name and mac address with no password.
+  ap: {}
+  # Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
+  fast_connect: "${wifi_fast_connect}"
+  # Define dns domain / suffix to add to hostname
+  domain: "${dns_domain}"
+
+captive_portal:
+
+dashboard_import:
+  package_import_url: github://athom-tech/athom-configs/athom-without-relay-plug.yaml
+
+# Dentra Components - Adds 'Platform - Energy Statistics'
+# https://github.com/dentra/esphome-components/tree/master/components/energy_statistics
+# external_components:
+#   - source: github://dentra/esphome-components
+
+uart:
+  rx_pin: RX
+  baud_rate: 4800
+
+globals:
+  - id: total_energy
+    type: float
+    restore_value: yes
+    initial_value: '0.0'
+
+binary_sensor:
+  - platform: status
+    name: "Status"
+    entity_category: diagnostic    
+
+  - platform: gpio
+    pin:
+      number: 5
+      mode: INPUT_PULLUP
+      inverted: true
+    name: "Button"
+    disabled_by_default: true
+    on_multi_click:
+      - timing:
+        - ON for at least 4s
+        then:
+          - button.press: Reset
+
+sensor:
+  - platform: uptime
+    name: "Uptime Sensor"
+    id: uptime_sensor
+    entity_category: diagnostic
+    internal: true
+
+  # Reports the WiFi signal strength/RSSI in dB
+  - platform: wifi_signal
+    name: "WiFi Signal dB"
+    id: wifi_signal_db
+    update_interval: 60s
+    entity_category: diagnostic
+
+  # Reports the WiFi signal strength in %
+  - platform: copy
+    source_id: wifi_signal_db
+    name: "WiFi Signal Percent"
+    filters:
+      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
+    unit_of_measurement: "%"
+    entity_category: diagnostic
+    device_class: ""
+
+  - platform: cse7766
+    current:
+      name: "Current"
+      filters:
+        - throttle_average: ${sensor_update_interval}
+        - lambda: if (x < 0.060) return 0.0; else return x;   #For the chip will report less than 3w power when no load is connected
+
+    voltage:
+      name: "Voltage"
+      filters:
+        - throttle_average: ${sensor_update_interval}
+
+    power:
+      name: "Power"
+      id: power_sensor
+      filters:
+        - throttle_average: ${sensor_update_interval}
+        - lambda: if (x < 3.0) return 0.0; else return x;    #For the chip will report less than 3w power when no load is connected
+
+    energy:
+      name: "Energy"
+      id: energy
+      unit_of_measurement: kWh
+      internal: ${hide_energy_sensor}
+      filters:
+        - throttle: ${sensor_update_interval}
+        # Multiplication factor from W to kW is 0.001
+        - multiply: 0.001
+      on_value:
+        then:
+          - lambda: |-
+              static float previous_energy_value = 0.0;
+              float current_energy_value = id(energy).state;
+              id(total_energy) += current_energy_value - previous_energy_value;
+              previous_energy_value = current_energy_value;
+              id(total_energy_sensor).update();
+
+
+    apparent_power:
+      name: "Apparent Power"
+      filters:
+        - throttle_average: ${sensor_update_interval}
+        
+    power_factor:
+      name: "Power Factor"
+      filters:
+        - throttle_average: ${sensor_update_interval}
+
+  - platform: template
+    name: "Total Energy"
+    id: total_energy_sensor
+    unit_of_measurement: kWh
+    device_class: "energy"
+    state_class: "total_increasing"
+    icon: "mdi:lightning-bolt"
+    accuracy_decimals: 3
+    lambda: |-
+      return id(total_energy);
+    update_interval: ${sensor_update_interval}
+
+  - platform: total_daily_energy
+    name: "Total Energy Since Boot"
+    restore: true
+    power_id: power_sensor
+    unit_of_measurement: kWh
+    icon: mdi:hours-24
+    accuracy_decimals: 3
+    filters:
+      - multiply: 0.001
+
+  #    # Dentra Components - Define the id of the sensor providing 'Total Energy' used
+  # - platform: "energy_statistics"
+  #   total: total_energy_sensor
+
+  #    # Dentra Components - Adds Energy Today. Persistents if restarted, unlike 'total_daily_energy'
+  #   energy_today:
+  #     name: "Energy Today"
+  #     id: total_energy_today
+  #     accuracy_decimals: 3
+  #     icon: mdi:hours-24
+
+  #    # Dentra Components - Adds Energy Yesterday
+  #   energy_yesterday:
+  #     name: "Total Energy Yesterday"
+  #     id: total_energy_yesterday
+  #     accuracy_decimals: 3
+
+  #    # Dentra Components - Adds Energy Week
+  #   energy_week:
+  #     name: "Total Energy Week"
+  #     id: total_energy_week
+  #     accuracy_decimals: 3
+
+  #    # Dentra Components - Adds Energy Month
+  #   energy_month:
+  #     name: "Total Energy Month"
+  #     id: total_energy_month
+  #     accuracy_decimals: 3
+
+button:
+  - platform: restart
+    name: "Restart"
+    entity_category: config
+
+  - platform: factory_reset
+    name: "Factory Reset"
+    id: Reset
+    entity_category: config
+
+  - platform: safe_mode
+    name: "Safe Mode"
+    internal: false
+    entity_category: config
+
+light:
+  - platform: status_led
+    name: "Status LED"
+    id: blue_led
+    disabled_by_default: true
+    pin:
+      inverted: true
+      number: GPIO13
+
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: "IP Address"
+      entity_category: diagnostic
+    ssid:
+      name: "Connected SSID"
+      entity_category: diagnostic
+    mac_address:
+      name: "Mac Address"
+      entity_category: diagnostic
+
+  #  Creates a sensor showing when the device was last restarted
+  - platform: template
+    name: 'Last Restart'
+    id: device_last_restart
+    icon: mdi:clock
+    entity_category: diagnostic
+#    device_class: timestamp
+
+  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
+  - platform: template
+    name: "Uptime"
+    entity_category: diagnostic
+    lambda: |-
+      int seconds = (id(uptime_sensor).state);
+      int days = seconds / (24 * 3600);
+      seconds = seconds % (24 * 3600);
+      int hours = seconds / 3600;
+      seconds = seconds % 3600;
+      int minutes = seconds /  60;
+      seconds = seconds % 60;
+      if ( days > 3650 ) {
+        return { "Starting up" };
+      } else if ( days ) {
+        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if ( hours ) {
+        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if ( minutes ) {
+        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else {
+        return { (String(seconds) +"s").c_str() };
+      }
+    icon: mdi:clock-start
+
+time:
+  - platform: sntp
+    id: sntp_time
+  # Define the timezone of the device
+    timezone: "${timezone}"
+  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
+    update_interval: ${sntp_update_interval}
+  # Set specific sntp servers to use
+    servers: 
+      - "${sntp_server_1}"
+      - "${sntp_server_2}"
+      - "${sntp_server_3}"    
+  # Publish the time the device was last restarted
+    on_time_sync:
+      then:
+        # Update last restart time, but only once.
+        - if:
+            condition:
+              lambda: 'return id(device_last_restart).state == "";'
+            then:
+              - text_sensor.template.publish:
+                  id: device_last_restart
+                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
\ No newline at end of file