Spectre No blocks found yet but received Coin

[eisenkoch]

I have some strange issue. I Setup mingcore with spectre (SPR) Coin and all seems working without any error in Logfile.
But even after serveral day's minging with around 6-11 kh/s miningcore belives that no block was found.
Strange thing now is, that I received in the last couple days Coins from "COINBASE (New coins)" in my Pool_walltet.
Im sure that I using a completly diffent address to mine this and I also had several other Users alreday connected.

MyConfig is:

   {
        "id": "spectre",
        "enabled": true,
        "coin": "spectre-network",
        "address": "spectre:qr8gmzwt2wcgesqjxtvars5mgf88cx4dhj8jjkcappa0lc6nfwf6wlrcuxtud",
        "rewardRecipients": [
            {
                "type": "op",
                "address": "spectre:qr8gmzwt2wcgesqjxtvars5mgf88cx4dhj8jjkcappa0lc6nfwf6wlrcuxtud",
                "percentage": 0.1
            }
        ],
        "protobufWalletRpcServiceName": "spectrewalletd.spectrewalletd",
        "clientConnectionTimeout": 600,
        "banning": {
            "enabled": false,
            "time": 600,
            "invalidPercent": 50,
            "checkThreshold": 50,
            "minerEffortPercent": 4.65661287E-09,
            "minerEffortTime": 259200
        },
        "ports": {
            "4364": {
                "listenAddress": "0.0.0.0",
                "name":"CPU",
                "difficulty": 256,
                "varDiff": {
                    "minDiff": 16,
                    "targetTime": 15,
                    "retargetTime": 5,
                    "variancePercent": 25,
                    "maxDelta": 16384
                }
            },
        },
        "daemons": [
            {
                "host": "127.0.0.1",
                "port": 18110,
                "user": null,
                "password": null
            },
            {
                "host": "127.0.0.1",
                "port": 8882,
                "user": null,
                "password": null,
                "category": "wallet"
            }
        ],
        "paymentProcessing": {
            "enabled": true,
            "walletPassword": "xxxxxxxxxxxxxxx",
            "minimumPayment": 0.1,
            "versionEnablingMaxFee": "v0.12.18-rc5",
            "maxFee": 200000,
            "payoutScheme": "PPLNS",
            "payoutSchemeConfig": {
                "factor": 0.5
            }

Could someone please give me a hint?

[blackmennewstyle]

Hello,

Network hashrate is 133.34 MH/s, you can calculate your Estimate Time To Find A Block based on your own hashrate.

Your were probably mining on your wallet maybe using the bridge or directly to the node with spectreminer?

Couple of advice, remove:

            "minerEffortPercent": 4.65661287E-09,
            "minerEffortTime": 259200

Not necessary for SPR.

Also remove:

            "versionEnablingMaxFee": "v0.12.18-rc5",

[eisenkoch]

Hi Cedric, I removed the line from above and restarted the miningcore. Based on the actual calculation I should get around 60SPR with 10kH/s... and yes I receive in my declared wallet around 30-50SPR per day. BUT this is not registered in miningcore and shared with the participants.
I received again a Blockreward with https://explorer.spectre-network.org/txs/a500e158759ea01b48bed9148112e6c16d0df1fe06018579ac9a8f828625df10

The Mining was done "stratum+tcp://spr.mining.st-ips.de:4364"

do you have any other idea?

[blackmennewstyle]

I'm afraid i am not following your reasoning here, sounds like you jumped into being a mining pool operator without really understanding how it works:

• You will only get rewarded if you find blocks, you haven't find any block according to your webUI and miningpoolstats. miningcore does not pay people out thin air, YOU MUST FIND BLOCKS in order to send payment.
• DO NOT MINE with the pool address, the pool address MUST ONLY be used exclusively by miningcore. Please create a dedicated wallet address for mining.
• Lastly, my repo only covers the stratum pool software, i am not the dev of the webUI, it is possible that your webUI is buggy.