Skip to content

Latest commit

 

History

History
12 lines (10 loc) · 655 Bytes

README.md

File metadata and controls

12 lines (10 loc) · 655 Bytes
Raw

sign-changer-Verilog

how to run

  1. Make sure Vivado is installed on your device
  2. Download the zip file.
  3. In folder, extract the zip file, then extract the Lab 2 zip file.
  4. Click on the Lab 2 Vivado Project File.
  5. Once Vivado opens, click on Open Hardware Manager under the Flow Navigator, and make sure to connect to the BASTS3 board.
  6. Once that is done, click on Program device.

Description

The switches on the board will display the corresponding number on the hex7segment display. Once btnU is pressed, the hex7segment display will show the negative version of that number in 2's complement. BtnR is used to reset the entire board.