R23.6.9 RK3588 AIoT Release #11287
Replies: 8 comments 5 replies
-
|
然后回到 Download Image 界面，确认 boot 选择的是 MiniLoaderAll_3588X.bin，system 选解压出来的 固件的 Img，最后会到第一个标签，点击 Run 刷入 |
Beta Was this translation helpful? Give feedback.
-
|
超级小白，不懂就问，USB.-RK3588_RKDevTool_Release_v2.84.rar这个解压之后是放到tf卡里面么？还是说在电脑上运行然后连线到r6s上？ |
Beta Was this translation helpful? Give feedback.
-
|
lean大神，R6s目前cpu大核能跑2.3Ghz，希望能更新固件跑到2.4Ghz满血频率。 |
Beta Was this translation helpful? Give feedback.
-
|
不能用sd卡启动然后刷吗 |
Beta Was this translation helpful? Give feedback.
-
|
不能用sd卡启动然后刷吗 |
Beta Was this translation helpful? Give feedback.
-
|
不可以的 |
Beta Was this translation helpful? Give feedback.
-
|
使用这个库里没有 R6S 设备类型？我想自己编译一个。 |
Beta Was this translation helpful? Give feedback.
-
|
这里边R5s能支持rk3588吗？ |
Beta Was this translation helpful? Give feedback.
-
|
大雕啥时候能让R6S满血跑啊，2.4Ghz是刚需啊…………跑个2.3Ghz都不好意思跟跑2.4Ghz的朋友打招呼。 |
Beta Was this translation helpful? Give feedback.
-
|
测试强行 2.4Ghz 性能只有略微上升，却需要加 0.1v 电压，感觉得不偿失 |
Beta Was this translation helpful? Give feedback.
-
|
R23.6.9 RK3588 AIoT Release |
Beta Was this translation helpful? Give feedback.
-
|
超级小白，不懂就问，USB.-RK3588_RKDevTool_Release_v2.84.rar这个解压之后是放到tf卡里面么？还是说在电脑上运行然后连线到r6s上？ |
Beta Was this translation helpful? Give feedback.
-
|
我固件刷上去能用，但使用rk的烧写工具，却发现不了设备了，这个怎么处理？ |
Beta Was this translation helpful? Give feedback.
-
RK3588 固件刷机指南：
然后把 RK3588 设备进入 Maskrom 模式，按 Firmware 选择 rk3588_update.img，点击 EraseFlash 擦除
This discussion was created from the release R23.6.9 RK3588 AIoT Release.
Beta Was this translation helpful? Give feedback.
All reactions