About the jumper settings #67
-
|
Hello. I stumbled across this project recently and I have a question about the jumper settings for signal routing of the inputs and outputs. I have not yet found any description on those, but saw in another post that they should be 2-3 in all cases. Since I am a banana person I altered the footprints for the jack so they can be used with either 3.5mm jacks or banana on the units I will order. I am glad there were no routing on the back side of the jacks :-) |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
Hi there, correct OUT3,4 & AUXR,L are unused, you could attach wires to them, alter the driver and start using them :) |
Beta Was this translation helpful? Give feedback.
-
|
Thanx! Will do. |
Beta Was this translation helpful? Give feedback.
Hi there, correct OUT3,4 & AUXR,L are unused, you could attach wires to them, alter the driver and start using them :)
Driver code is located here https://github.com/ctag-fh-kiel/ctag-tbd/blob/master/components/drivers/codec.cpp
Let us know how happy you are with your modded banana version.