This is a NordVPN client docker container using openvpn that use the recommended NordVPN servers, and opens a SOCKS5 (dante server) and http proxy (tinyproxy).
VPN servers selection is performed through nordnvpn API.(country, technology, protocol)
Added docker image version for amd64,arm64, arm/v7, arm/v6
Whenever the connection is lost the unbound, tinyproxy and sock daemons are killed, disconnecting all active connections (tunnel down event).
Healtcheck tests dns resolution, openvpn status (connected), tinyproxy listening address, https/socks proxies.
Protected status was checked through nordvpn api, as the endpoint was removed, this image does not test its protected status. As long as openvpn returns a connected status, vpn is up.
This image is largely based on jeroenslot/nordvpn-proxy with dante free socks server added.
you can then expose port 1080 from the container to access the VPN connection via the SOCKS5 proxy.
To sum up, this container:
- Opens the best connection to NordVPN using openvpn and the conf downloaded using NordVpn API according to your criteria.
- Starts a HTTP proxy that route
eth0:8888toeth0:1080(socks server) with tinyproxy - Starts a SOCKS5 proxy that routes
eth0:1080totun0/nordlynxwith dante-server. - Starts unbound as dnssec querying specified DNS.
The main advantage is that you get the best recommendation for each selection.
Script for OpenVpn config download is base on the one developped for haugene 's docker transmission openvpn https://haugene.github.io/docker-transmission-openvpn/provider-specific/
The container is expecting three parameters to select the vpn server:
- NORDVPN_COUNTRY define the exit country.
- NORDVPN_PROTOCOL although many protocols are possible, only tcp or udp are available.
- NORDVPN_CATEGORY although many categories are possible, p2p seems more adapted.
NOTE: This container works best using the
p2ptechnology.NOTE: At the moment, this container has no kill switch... meaning that when the VPN connection is down, the connection will be rerouted through your provider. although, on tunnel down event, the socks server is stopped preventing to relay unprotected requests, and defaults route through eth0 (not vpn) are deleted.
NOTE: as of 22/03/28, NORDVPN_LOGIN and NORDVPN_PASS secrets file are replaced with a single file, NORDVPN_CREDS, having login at first line and password as the second line.
- DNS to uses external DNS, if none given: "1.1.1.1@853#cloudflare-dns.com 1.0.0.1@853#cloudflare-dns.com"
- NORDVPN_USER=email or service user
- NORDVPN_PASS=pass or service pass
- EXIT_WHEN_IP_NOTEXPECTED=(0|1) # stop container when detected network is not as expected (based on /24 networks)
- NORDVPN_SERVER=<#>.nordvpn.com: eg: nl568.nordvpn.com, get configuration based on server's fqdn, bypassing all api's recommendations. Connection may fail when the server is offline or overloaded. has precedence over NORDVPN_COUNTRY and NORDVPN_CATEGORY.
- NORDVPN_TESTS=[1-4], simple tests to test basic api filtering functions.
- WRITE_OVPN_STATUS=(0|1): write openvpn status (CONNECTED/NOTCONNECTED) to /var/tmp/ovpn_status. you may mount the file to get the openvpn status outside the container.
- WAITSEC=30, default value, time to wait between two vpn login.
- Just copy/paste the grey text block starting with version 3.8. to a file named docker-compose.yml
- Set values for NORDVPN_TECHNOLOGY, NORDVPN_PROTOCOL, NORDVPN_COUNTRY
- adapt if needed LOCAL_NETWORK, TZ
- create file nordvpn_creds containing your login in the first line and your password in the second line.
nordvpn_creds:
thisismyusername
thisismypassword
Nordvpn openvpn credentials are to be found following that procedure:
-
Go to NordVPN website and log in
-
Under accounts - Services - click NordVPN
-
Click - Set up NordVPN manually - at the bottom right of the page.
-
You will receive a verification code in your email that you use for NordVPN services. Type the code in the popup window the preceded the email check.
-
Copy the credentials using the “Copy” buttons on the right for your new encrypted user name and password and paste them in nordvpn_creds
-
start the container: docker compose up -d
once the container is started, you will see in the logs these two lines, indicating that both socks and http proxies are up.
nordvpn-proxy | INFO: OPENVPN: up: starting tinyproxy
.....
nordvpn-proxy | ok: run: tinyproxy: (pid 103) 1s, normally down
see docker-compose-dist.yml for an example to setup and run this image.
```yaml
services:
proxy:
image: edgd1er/nordvpn-proxy:latest
restart: unless-stopped
ports:
- "1081:1080" # socks port udp or tcp
- "8888:8888/tcp" # http proxy tcp.
# devices:
# - /dev/net/tun #Optional, will be created if not preset
sysctls:
- net.ipv4.conf.all.rp_filter=2
cap_add:
- NET_ADMIN
environment:
- TZ=America/Chicago
- DNS=1.1.1.1@853#cloudflare-dns.com 1.0.0.1@853#cloudflare-dns.com
- NORDVPN_COUNTRY=germany #Optional, by default, servers in user's country.
- NORDVPN_PROTOCOL=udp #Optional, udp by default, udp or tcp
- NORDVPN_CATEGORY=p2p #Optional, Africa_The_Middle_East_And_India, Asia_Pacific, Europe, Onion_Over_VPN, P2P, Standard_VPN_Servers, The_Americas
- NORDVPN_USER=<email> #Not required if using secrets
- NORDVPN_PASS=<pass> #Not required if using secrets
- OPENVPN_PARAMETERS= #optional, empty by default, overrides openvpn config file with parameters
- OPENVPN_LOGLEVEL= #Optional, define openvpn verbose level 0-9
- EXIT_WHEN_IP_NOTASEXPECTED=0 # when detected ip is not belonging to remote vpn network
- LOCAL_NETWORK=192.168.0.0/24 # allow network access for socks and tinyproxy.
- TINYPORT=8888 #define tinyport inside the container, optional, 8888 by default,
- TINY_LOGLEVEL=Error #Critical (least verbose), Error, Warning, Notice, Connect (to log connections without Info's noise), Info
- DANTE_LOGLEVEL="error" #Optional, error by default, available values: connect disconnect error data
- DANTE_ERRORLOG=/dev/stdout #Optional, /dev/null by default
- CRON_LOGLEVEL=9 #optional, from 0 to 9, 8 default, 9 quiet.
- DEBUG=0 #(0/1) activate debug mode for scripts, dante, nginx, tinproxy
- TINYUSER=username #define http/socks proxy password, not required if using secrets
- TINYPASS=password #define http/socks proxy password, not required if using secrets
secrets:
- NORDVPN_CREDS
- TINY_CREDS
volumes:
- ./myconfig/:/config/
secrets:
NORDVPN_CREDS:
file: ./nordvpn_creds
TINY_CREDS:
file: ./tiny_creds
script checks for:
- proper dnssec resolution
- openvpn service being up
- openvpn being connected
- warns if openvpn remote ip seems not coherent
if any of these fail, services are restarted.
dockerfile healtcheck:
- dns check
- check openvpn status
- check if eth0 ip has changed, change tinyproxy listen address if needed.
- check ip through proxies
When vpn interface (tun) is up, default route through unprotected interface (eth0) is removed. To ensure that little or no traffic is forwarded unprotected, services are stopped on any of these events:
- when the api returns that the status is not protected, the container stops.(every 5min)
- when openvpn returns a status NOTCONNECTED, all services are stopped, openvpn is restarted. when ok, dante and tinyproxy are started.(checked every 5 minutes)
- when openvpn service is stopped, the down phase (runit feature) stops all other services.
- when the tun interface is disconnected, openvpn fires the down.sh script, stopping all services.
Another image is available using nordvpn's client. Openvpn and wireguard (nordlynx) protocols are available. better speed may be achieved with wireguard.
| names | links |
|---|---|
| nordlynx-proxy | image: https://hub.docker.com/r/edgd1er/nordlynx-proxy |
| nordlynx-proxy | github: https://github.com/edgd1er/nordlynx-proxy |