DrawImage draws allways the same (first) image

[andreas20240621]

!!!!! If you think there is a bug in PDFsharp then please use the IssueSubmissionTemplate to make the issue replicable.
!!!!! https://docs.pdfsharp.net/General/IssueReporting.html
!!!!! => Sorry, but this link doesn't work

Reporting an Issue Here

When creating an PDF with three different Images, using XGraphics.DrawImage, the resulting PDF schould show up three different images.

Actual Behavior

The resulting pdf shows up the same (first) image for three times.
This happend, if PDFSharp 6.1.0 is used
This does not happen, if PDFSharp 6.0.0 is used.

Steps to Reproduce the Behavior

!!!!! We strongly recommend using the IssueSubmissionTemplate to make sure we can replicate the issue.
!!!!! https://docs.pdfsharp.net/General/IssueReporting.html
!!!!! => sorry, this link does not work.

Download Solution from embedded zip File.
Compile Solution using NuGet Package PDFSharp6.1.0
Run the compiled Program. This will produce the wrong result.
(file PdfSharpTest1.pdf in the Solution Folder)

Compile Solution using NuGet Package PDFSharp6.0.0
Run the compiled Program. This will produce the correct result.
(file PdfSharpTest1.pdf in the Solution Folder)

PdfSharpTest1.zip

This sample project contains 2 PDF Files. These are the results when Project is compiled with PDFSharp 6.0.0 oder PDFSharp 6.1.0
The PDF named PdfSharpTest1-Version6.0.0.pdf contains the expected result.
The PDF named PdfSharpTest1-Version6.1.0.pdf contains the wrong result.

[ThomasHoevel]

Thanks for the feedback.
Issue does not show with Core build and WPF, but shows with GDI build.

Your code that does not work with the GDI build is this:

using FileStream stream = File.OpenRead(iamgeFile);
MemoryStream mems = new MemoryStream();
stream.CopyTo(mems);
mems.Position = 0; // Added by me to make WPF build work.

XImage resultImage = XImage.FromStream(mems);

Here is a shorter version that works:

FileStream stream = File.OpenRead(iamgeFile);
XImage resultImage = XImage.FromStream(stream);

And here is an even shorter version that also works:
XImage resultImage = XImage.FromFile(iamgeFile);

Will investigate further next week. It should also work with the indirection to the MemoryStream object.

There was a hyphen missing in the URL:
https://docs.pdfsharp.net/General/Issue-Reporting.html

[andreas20240621]

Thanks for your fast response.
You are right, that both of your versions do work correctly.

But they both keep an file stream open, what i tried to avoid.

i've added the following "File.Delete" at the end of the Main Routine

pdfoutput.Save(Path.Combine(targetDirectory, "PdfSharpTest1.pdf"));

File.Delete(Path.Combine(targetDirectory, "pic1.jpg"));
File.Delete(Path.Combine(targetDirectory, "pic2.jpg"));
File.Delete(Path.Combine(targetDirectory, "pic3.jpg"));

And the program throw the error
System.IO.IOException: "The process cannot access the file 'D:\repos\PdfSharpTest1\pic1.jpg' because it is being used by another process."

In my productiv Application, i do not delete those files of course, but we have PDF outputs with a very large number of images included. So it would be very unhandy to keep them all open, during program execution.

So i will look forward to your investigation next week, to enable MemoryStreams here again.
We use Library 6.0.0 for now, so it doesn't hurry.

[th-joerger]

I encountered the same problem in my production environment. Several customers have been severly affected with hundreds of wrongly printed qr codes.

The culprit seems to be this dysfunctional code:

                    else if (image._stream != null!)
                    {
                        if (image._stream is MemoryStream ms)
                        {
                            var md5 = System.Security.Cryptography.MD5.Create();
                            var hash = md5.ComputeHash(ms);
                            image._path = "*md5:" + HashToString(hash);
                        }
                        else
                        {
                            // TODO Use hash code.
                            image._path = "*" + Guid.NewGuid().ToString("B");
                        }
                    }
#if GDI
                    else if (image._gdiImage != null!)
                    {
                        // TODO Use hash code.
                        image._path = "*" + Guid.NewGuid().ToString("B");
                    }
#endif

The md5 is always *md5:d41d8cd98f00b204e9800998ecf8427e which is the md5 hash of an empty input. The stream image._stream is already consumed when computing the hash, because in GDI in XImage.cs, the stream is already used to create an Image.

The work around for GDI with the check for the existence of image._gdiImage comes to late after the md5 hash is already computed.

When the memory stream is reset, everything works as expected.

                        if (image._stream is MemoryStream ms)
                        {
                            ms.Seek(0, SeekOrigin.Begin); // make sure, ms is not already consumed
                            var md5 = System.Security.Cryptography.MD5.Create();
                            var hash = md5.ComputeHash(ms);
                            image._path = "*md5:" + HashToString(hash);
                        }

So, I think the fix is, to check for the existence of image._gdiImage before computing the md5 hash. I send you a PR #128 including a test. I would also appreciate you properly merging PRs instead of simply copying the code and squashing my contribution.

[ThomasHoevel]

The issue has been resolved with version 6.1.1 released today.
We are sorry for any inconveniences the issue has caused.

[andreas20240621]

Yes, the issue has been fixed with version 6.1.1

[X1WGM]

Hi,
I am using 6.1.1 and this is still an issue for me.
I have a number of DrawImage's where the XImage is either FromFile or FromStream. All the FromFile images are correct. However, I have 3 "different" FromStream images and images 2 and 3 are a repeat of image 1. If I remove image 1, image 3 becomes a repeat of image 2.
So in simple terms, the first image that is drawn using FromStream is then always repeated on subsequent DrawImage commands. It's like the first image is cached and then just reused over and over.
I hope this can be fixed.
Thank you.

Update:-
It seems there is some sort of caching happening. I have saved my image 2 stream to disk and then used FromFile. This also draws as image 1, even though I can clearly see it is a different image. If I then rename image 2 on disk and use a new FromFile XImage, it still draws as image 1. So is there some sort of Meta data that is being checked and if the same as image 1 just use that instead?

I hope this helps a little.

[ThomasHoevel]

Hi, I am using 6.1.1 and this is still an issue for me.

Please use the Issue Submission Template so we can replicate your issue.
Does this happen with all three builds? Or just with the GDI build as the issue discussed here?

[X1WGM]

Hi, I am using 6.1.1 and this is still an issue for me.

Please use the Issue Submission Template so we can replicate your issue. Does this happen with all three builds? Or just with the GDI build as the issue discussed here?

Thank you for the fast reply. I would love to use the Submission Template. Only I have no idea what or where that is. Please forgive me. Sorry.

I am using C# .NET Framework 4.8 in an MVC website. So again, sorry for my ignorance, is that GDI? I can say I am not developing a WPF project. Just a corporate website. Everything was going perfectly until I noticed this issue.

I am in the process of creating a Customer Credit Agreement document using PDFSharp. It all looks fantastic but when I get the 3 unique signatures from the SQL database and DrawImage(FromStream) them on the document, whichever one I draw first is then repeated for the other 2. If I change the order of the DrawImage statements, I get a different signature, but again, repeated.

For my sanity, I tried saving the 3 streams to disk and there I can see that they are all different. Now here's another pointer (hopefully)... Even though I can see that the 3 images on disk are different, if I then use DrawImage(FromFile) for the 3 images, the same problem occurs. I.e. Whichever image is drawn first is repeated for the other 2. So in my mind, it's like any image that originated from a stream, even after saving to disk, is seen as the same image and therefore maybe taken from cache or something like that.

I do hope this helps you. And if there's anything I can provide to assist, please let me know.

Thank you.

[ThomasHoevel]

For issue reporting, see here:
https://docs.pdfsharp.net/General/Issue-Reporting.html

It should be easy to replicate the issue without MVC in a console application.

[X1WGM]

For issue reporting, see here: https://docs.pdfsharp.net/General/Issue-Reporting.html

It should be easy to replicate the issue without MVC in a console application.

Thank you. Here's a quick update that may help...
If I resize the image using C# code it works and I get the the images I expect.

[ThomasHoevel]

Here's a quick update that may help...

It would be good to have code that allows to replicate the issue.
You have images that cause an issue, but as long as you do not share neither your images nor your code, we're having difficulties to investigate the matter.

[X1WGM]

Here's a quick update that may help...
It would be good to have code that allows to replicate the issue.
You have images that cause an issue, but as long as you do not share neither your images nor your code, we're having difficulties to investigate the matter.

Again, thank you for your fast responses.
I will try and create a simple console project that will replicate the problem. Can you check the https://github.com/empira/PDFsharp.IssueSubmissionTemplate link as it just sends me in circles. And the other link to this on the page is a 404.

[ThomasHoevel]

This link works:
https://docs.pdfsharp.net/General/Issue-Reporting.html

This link works:
https://github.com/empira/PDFsharp.IssueSubmissionTemplate

[X1WGM]

This link works: https://docs.pdfsharp.net/General/Issue-Reporting.html

This link works: https://github.com/empira/PDFsharp.IssueSubmissionTemplate

Unfortunately not for me... (Maybe I'm doing something wrong)

https://docs.pdfsharp.net/General/Issue-Reporting.html takes me to a page with a link to https://github.com/empira/PDFsharp.IssueSubmissionTemplate. Further down this page is this...

1. Download the solution from https://github.com/empira/PDFsharp.IssueSubmissionTemplate (I am presuming this is what I need?)

Which is the same page. However, when I click it I can see the URL trying to change to something else before just refreshing the current page.
There is also a link under the heading Template solution for issue reports. This is the 404 link. So sorry.

Anyway, back to the real issue. I will try now to create a console project that I can send over and some images.

Thank you.

[ThomasHoevel]

Try this page:
https://github.com/empira/PDFsharp.IssueSubmissionTemplate

Near the top is a green button labelled "<> Code" with a drop-down menu.

The drop-down menu gives you several options to get the code, including "Download ZIP", or "Clone" with "GitHub CLI", or copy the "HTTPS" link to clone with Visual Studio - to name just a few options.

[th-joerger]

You can try my fix from #128

NuGet packages can be found here.

[X1WGM]

Try this page: https://github.com/empira/PDFsharp.IssueSubmissionTemplate

Near the top is a green button labelled "<> Code" with a drop-down menu.

The drop-down menu gives you several options to get the code, including "Download ZIP", or "Clone" with "GitHub CLI", or copy the "HTTPS" link to clone with Visual Studio - to name just a few options.

I now understand. It's a whole project. For some reason I was expecting some kind of web form. Sorry.
I downloaded and opened the solution. Really not sure where to start to be honest. However, I have created and attached a simple console project that replicates my problem. I am sorry that this is probably not your preferred way but it was quick and easy for me to get this issue over to you.
Thanks again for your help here. 👍
PDFSharpIssue127.zip

[X1WGM]

You can try my fix from #128

NuGet packages can be found here.

Thank you. I know I need to get myself familiar with how GitHub works and how I can get your fix into my project so that I can try it. However, I am hoping that the attached ZIP in my reply to @ThomasHoevel will help locate the problem and version 6.1.2 will be released soon. Fingers crossed.

[ThomasHoevel]

@X1WGM I can replicate the issue now.
How did you create those images? Scanner software?

Will talk to my boss about a 6.1.2 version. Maybe we'll skip 6.1.2 and go for 6.2.0 Preview 1 instead.
Anyway, issue will be resolved with the next version.

The change from PR 128 does not make a difference in this case, so not worth giving it a try.

[X1WGM]

@X1WGM I can replicate the issue now. How did you create those images? Scanner software?

Will talk to my boss about a 6.1.2 version. Maybe we'll skip 6.1.2 and go for 6.2.0 Preview 1 instead. Anyway, issue will be resolved with the next version.

The change from PR 128 does not make a difference in this case, so not worth giving it a try.

Hello @ThomasHoevel,

The images were created from a byte array. Here is the process of the web app that I have created...

1. On a Samsung tablet running Google Chrome a customer signs 2 different sections of their credit agreement and another signature is captured for the sales representative. So 3 unique signatures.
2. These are then serialized into a byte array and persisted to an MS SQL database.
3. They are then read from the database as a stream and then added to the PDFSharp document.

What I did for testing this was save the streams to disk, I.e. Image1.png, Image2.png & Image3.png. As you can see in my example project the 3 images are different when viewed on the file system. But when these are added to the document, the first image used is then duplicated for the other images.

I have cunningly found a work-around for now. That is... If I resize the 3 images to different dimensions but keeping the aspect ratio, they all work as expected. In my testing, even a resize back to the original size causes them to duplicate the first image. So it's like it is caching the first images dimensions and then any subsequent images of the same size get ignored and the first image is used. That's just what I have found. I hope this helps.

Anyway, fantastic software. Our credit agreements are looking neat and professional. Thank you. 👍👍👍

[ThomasHoevel]

The issue submitted by X1WGM is different from the issue submitted by Andreas.
The "X1WGM" issue is as follows:

• The three images are identical except for the Alpha mask - image bits are always 0 for the three sample images
• The Core build of PDFsharp 6.1.1 does not account for the Alpha mask when calculating a hashcode - this is a bug and it will be fixed with the forthcoming preview version

See also:
https://github.com/empira/PDFsharp/wiki/PDFsharp-6.1.0-and-6.1.1-incorrectly-duplicate-first-image

[ascott18]

Here's a workaround that doesn't require building the entire library from source, nor making any modifications to the content of images:

var image = XImage.FromStream(stream);

// HACK: Workaround https://github.com/empira/PDFsharp/issues/127
var selectorField = image.GetType().GetField("_selector", BindingFlags.Instance | BindingFlags.NonPublic);
var selector = Activator.CreateInstance(selectorField.FieldType, image, doc.Options);
selector.GetType().GetField("<Path>k__BackingField", BindingFlags.Instance | BindingFlags.NonPublic).SetValue(selector, Guid.NewGuid().ToString());
selectorField.SetValue(image, selector);
// END HACK: Workaround https://github.com/empira/PDFsharp/issues/127