When you read a file, often there are many irrelevant texts that hinder you from understanding what that file does. To hide the unnecessary noise, use Vim fold.
In this chapter, you will learn different ways to fold a file.
Imagine that you are folding a sheet of paper to cover some text. The actual text does not go away, it is still there. Vim fold works the same way. It folds a range of text, hiding it from display without actually deleting it.
The fold operator is z (when a paper is folded, it is shaped like the letter z).
Suppose you have this text:
Fold me
Hold me
With the cursor in the first line, type zfj. Vim folds both lines into one. You should see something like this:
+-- 2 lines: Fold me -----
Here is the breakdown:
zfis the fold operator.jis the motion for the fold operator.
You can open a folded text with zo. To close the fold, use zc.
Fold is an operator, so it follows the grammar rule (verb + noun). You can pass the fold operator with a motion or text object. To fold an inner paragraph, run zfip. To fold to the end of a file, run zfG. To fold the texts between { and }, run zfa{.
You can fold from the visual mode. Highlight the area you want to fold (v, V, or Ctrl-v), then run zf.
You can execute a fold from the command-line mode with the :fold command. To fold the current line and the line after it, run:
:,+1fold
,+1 is the range. If you don't pass parameters to the range, it defaults to the current line. +1 is the range indicator for the next line. To fold the lines 5 to 10, run :5,10fold. To fold from the current position to the end of the line, run :,$fold.
There are many other fold and unfold commands. I find them too many to remember when starting out. The most useful ones are:
zRto open all folds.zMto close all folds.zatoggle a fold.
You can run zR and zM on any line, but za only works when you are on a folded / unfolded line. To learn more folding commands, check out :h fold-commands.
The section above covers Vim's manual fold. There are six different folding methods in Vim:
- Manual
- Indent
- Expression
- Syntax
- Diff
- Marker
To see which folding method you are currently using, run :set foldmethod?. By default, Vim uses the manual method.
In the rest of the chapter, you will learn the other five folding methods. Let's get started with the indent fold.
To use an indent fold, change the 'foldmethod' to indent:
:set foldmethod=indent
Suppose that you have the text:
One
Two
Two again
If you run :set foldmethod=indent, you will see:
One
+-- 2 lines: Two -----
With indent fold, Vim looks at how many spaces each line has at the beginning and compares it with the 'shiftwidth' option to determine its foldability. 'shiftwidth' returns the number of spaces required for each step of the indent. If you run:
:set shiftwidth?
Vim's default 'shiftwidth' value is 2. On the text above, there are two spaces between the start of the line and the text "Two" and "Two again". When Vim sees the number of spaces and that the 'shiftwidth' value is 2, Vim considers that line to have an indent fold level of one.
Suppose this time you only one space between the start of the line and the text:
One
Two
Two again
Right now if you run :set foldmethod=indent, Vim does not fold the indented line because there isn't sufficient space on each line. One space is not considered an indentation. However, if you change the 'shiftwidth' to 1:
:set shiftwidth=1
The text is now foldable. It is now considered an indentation.
Restore the shiftwidth back to 2 and the spaces between the texts to two again. In addition, add two additional texts:
One
Two
Two again
Three
Three again
Run fold (zM), you will see:
One
+-- 4 lines: Two -----
Unfold the folded lines (zR), then put your cursor on "Three" and toggle the text's folding state (za):
One
Two
Two again
+-- 2 lines: Three -----
What's this? A fold within a fold?
Nested folds are valid. The text "Two" and "Two again" have fold level of one. The text "Three" and "Three again" have fold level of two. If you have a foldable text with a higher fold level within a foldable text, you will have multiple fold layers.
Expression fold allows you to define an expression to match for a fold. After you define the fold expressions, Vim scans each line for the value of 'foldexpr'. This is the variable that you have to configure to return the appropriate value. If the 'foldexpr' returns 0, then the line is not folded. If it returns 1, then that line has a fold level of 1. If it returns 2, then that line has a fold level of 2. There are more values other than integers, but I won't go over them. If you are curious, check out :h fold-expr.
First, let's change the foldmethod:
:set foldmethod=expr
Suppose you have a list of breakfast foods and you want to fold all breakfast items starting with "p":
donut
pancake
pop-tarts
protein bar
salmon
scrambled eggs
Next, change the foldexpr to capture the expressions starting with "p":
:set foldexpr=getline(v:lnum)[0]==\\"p\\"
The expression above looks complicated. Let's break it down:
:set foldexprsets up the'foldexpr'option to accept a custom expression.getline()is a Vimscript function that returns the content of any given line. If you run:echo getline(5), it will return the content of line 5.v:lnumis Vim's special variable for the'foldexpr'expression. Vim scans each line and at that moment stores each line's number inv:lnumvariable. On line 5,v:lnumhas value of 5. On line 10,v:lnumhas value of 10.[0]in the context ofgetline(v:lnum)[0]is the first character of each line. When Vim scans a line,getline(v:lnum)returns the content of each line.getline(v:lnum)[0]returns the first character of each line. On the first line of our list, "donut",getline(v:lnum)[0]returns "d". On the second line of our list, "pancake",getline(v:lnum)[0]returns "p".==\\"p\\"is the second half of the equality expression. It checks if the expression you just evaluated is equal to "p". If it is true, it returns 1. If it is false, it returns 0. In Vim, 1 is truthy and 0 is falsy. So on the lines that start with an "p", it returns 1. Recall if a'foldexpr'has a value of 1, then it has a fold level of 1.
After running this expression, you should see:
donut
+-- 3 lines: pancake -----
salmon
scrambled eggs
Syntax fold is determined by syntax language highlighting. If you use a language syntax plugin like vim-polyglot, the syntax fold will work right out of the box. Just change the fold method to syntax:
:set foldmethod=syntax
Let's assume you are editing a JavaScript file and you have vim-polyglot installed. If you have an array like the following:
const nums = [
one,
two,
three,
four
]
It will be folded with a syntax fold. When you define a syntax highlighting for a particular language (typically inside the syntax/ directory), you can add a fold attribute to make it foldable. Below is a snippet from vim-polyglot JavaScript syntax file. Notice the fold keyword at the end.
syntax region jsBracket matchgroup=jsBrackets start=/\[/ end=/\]/ contains=@jsExpression,jsSpreadExpression extend fold
This guide won't cover the syntax feature. If you're curious, check out :h syntax.txt.
Vim can do a diff procedure to compare two or more files.
If you have file1.txt:
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
And file2.txt:
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
emacs is ok
Run vimdiff file1.txt file2.txt:
+-- 3 lines: vim is awesome -----
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
vim is awesome
[vim is awesome] / [emacs is ok]
Vim automatically folds some of the identical lines. When you are running the vimdiff command, Vim automatically uses foldmethod=diff. If you run :set foldmethod?, it will return diff.
To use a marker fold, run:
:set foldmethod=marker
Suppose you have the text:
Hello
{{{
world
vim
}}}
Run zM, you will see:
hello
+-- 4 lines: -----
Vim sees {{{ and }}} as fold indicators and folds the texts between them. With the marker fold, Vim looks for special markers, defined by 'foldmarker' option, to mark folding areas. To see what markers Vim uses, run:
:set foldmarker?
By default, Vim uses {{{ and }}} as indicators. If you want to change the indicator to another texts, like "coffee1" and "coffee2":
:set foldmarker=coffee1,coffee2
If you have the text:
hello
coffee1
world
vim
coffee2
Now Vim uses coffee1 and coffee2 as the new folding markers. As a side note, an indicator must be a literal string and cannot be a regex.
You loses all fold information when you close the Vim session. If you have this file, count.txt:
one
two
three
four
five
Then do a manual fold from line "three" down (:3,$fold):
one
two
+-- 3 lines: three ---
When you exit Vim and reopen count.txt, the folds are no longer there!
To preserve the folds, after folding, run:
:mkview
Then when you open up count.txt, run:
:loadview
Your folds are restored. However, you have to manually run mkview and loadview. I know that one of these days, I will forget to run mkview before closing the file and I will lose all the folds. How can we automate this process?
To automatically run mkview when you close a .txt file and run loadview when you open a .txt file, add this in your vimrc:
autocmd BufWinLeave *.txt mkview
autocmd BufWinEnter *.txt silent loadview
Recall that autocmd is used to execute a command on an event trigger. The two events here are:
BufWinLeavefor when you remove a buffer from a window.BufWinEnterfor when you load a buffer in a window.
Now after you fold inside a .txt file and exit Vim, the next time you open that file, your fold information will be restored.
By default, Vim saves the fold information when running mkview inside ~/.vim/view for the Unix system. For more information, check out :h 'viewdir'.
When I first started Vim, I neglected to learn fold because I didn't think it was useful. However, the longer I code, the more useful I find folding is. Strategically placed folds can give you a better overview of the text structure, like a book's table of content.
When you learn fold, start with the manual fold because that can be used on-the-go. Then gradually learn different tricks to do indent and marker folds. Finally, learn how to do syntax and expression folds. You can even use the latter two to write your own Vim plugins.