help.xml

<?xml version="1.0" encoding="iso-8859-1"?>

<PropertyList>

	<help>
		<title>Seafire IIIc</title>
		<key>
			<name>Space</name>
			<desc>operate starter</desc>
		</key>
		<key>
			<name>Ctrl-B</name>
			<desc>toggle Boost control cutout</desc>
		</key>
		<key>
			<name>d/D</name>
			<desc>fold Door up/down</desc>
		</key>
		<key>
			<name>Ctrl-D</name>
			<desc>toggle Door fold</desc>
		</key>
		<key>
			<name>f/F</name>
			<desc>close/open canopy</desc>
		</key>
		<key>
			<name>Ctrl-F</name>
			<desc>toggle wingFold</desc>
		</key>
		<key>
			<name>h/H</name>
			<desc>radiator flap up/down</desc>
		</key>
		<key>
			<name>o/O</name>
			<desc>lower hOok (cannot be raised)</desc>
		</key>
		<key>
			<name>k/K</name>
			<desc>toggle gear warning Klaxon</desc>
		</key>
		<key>
			<name>u/U</name>
			<desc>seat Up/down/</desc>
		</key>
		<key>
			<name>Ctrl-U</name>
			<desc>seat default</desc>
		</key>
		<key>
			<name>m/M</name>
			<desc>Mixture rich/weak</desc>
		</key>
		<key>
			<name>n/N</name>
			<desc>propeller fine/coarse</desc>
		</key>
		<key>
			<name>I</name>
			<desc>operate prIming pump</desc>
		</key>
		<key>
			<name>( )</name>
			<desc>fuel cock left/right toggle</desc>
		</key>
		<key>
			<name>&lt;/&gt;</name>
			<desc>rudder trim left/right</desc>
		</key>
		<key>
			<name>{ }</name>
			<desc>mag switch left/right toggle</desc>
		</key>
		<line>Start Routine</line>
		<line></line>
		<line>1. turn both magnetos on</line>
		<line>2. operate primer pump five times</line>
		<line>3. increase throttle to one third</line>
		<line>4. fire electric starter</line>
		<line></line>
		<line>Approach Procedure</line>
		<line>propeller pitch - fine (lever fully forward)</line>
		<line>engine - fast tick-over</line>
		<line>approach speed (full flaps): 80-85 kts IAS</line>
		<line>touchdown speed: 70 kts IAS</line>
	</help>
</PropertyList>