About config.json

You can customize the behaviour of the program by changing the values in config.json. This document explains what the single fields will do.

port: sets the port the web-server is listening on.
useGamepadByDefault: if set to false, / will redirect to a page where one of gamepad, keyboard, or touchpad can be chosen. If set to true, / redirects to the gamepad. The input-selection page can still be accessed via /index.html.
analog: if set to true the above-mentioned redirection will append ?analog to the address. This flag will cause the gamepad's d-pad to act like an analog stick instead of d-pad.
logLevel: set it to "debug" to get a lot more logging output, to "warning" to only get critical output, or even to "error" if you want to only get errors logged (not recommended).
ledBitFieldSequence: must be an array of 'bit fields'. The length of the array will determine how many controllers can connect to the server while the bit field values will set what LED-combination of the controllers will be lit. The bit fields are numbers from 0-15, resulting in the following LED arrangements:
```
 0 - ....
 1 - *...
 2 - .*..
 3 - **..
 4 - ..*.
 5 - *.*.
 6 - .**.
 7 - ***.
 8 - ...*
 9 - *..*
10 - .*.*
11 - **.*
12 - ..**
13 - *.**
14 - .***
15 - ****
```
Example: ledBitFieldSequence = [1, 12] will allow at most two controllers to connect. The first controller will have only the first LED lit (*...) and the second controller will have the last two LEDs lit (..**).

Provide feedback