This Helm chart is a lightweight way to configure and run our official Logstash Docker image.
Warning: This functionality is in beta and is subject to change. The design and code is less mature than official GA features and is being provided as-is with no warranties. Alpha features are not subject to the support SLA of official GA features (see supported configurations for more details).
Warning: This branch is used for development, please use 7.9.2 release for released version.
- Helm >=2.8.0 and <3.0.0
- Kubernetes >=1.8
See supported configurations for more details.
-
Add the Elastic Helm charts repo:
helm repo add elastic https://helm.elastic.co -
Install it:
- with Helm 2:
helm install --name logstash elastic/logstash - with Helm 3 (beta):
helm install logstash elastic/logstash
- with Helm 2:
-
Clone the git repo:
git clone [email protected]:elastic/helm-charts.git -
Install it:
- with Helm 2:
helm install --name logstash ./helm-charts/logstash --set imageTag=8.0.0-SNAPSHOT - with Helm 3 (beta):
helm install logstash ./helm-charts/logstash --set imageTag=8.0.0-SNAPSHOT
- with Helm 2:
Please always check CHANGELOG.md and BREAKING_CHANGES.md before upgrading to a new chart version.
- This repo includes a number of examples configurations which can be used as a reference. They are also used in the automated testing of this chart
- Automated testing of this chart is currently only run against GKE (Google Kubernetes Engine).
- The chart deploys a StatefulSet and by default will do an automated rolling
update of your cluster. It does this by waiting for the cluster health to become
green after each instance is updated. If you prefer to update manually you can
set
OnDeleteupdateStrategy. - It is important to verify that the JVM heap size in
logstashJavaOptsand to set the CPU/Memoryresourcesto something suitable for your cluster. - We have designed this chart to be very un-opinionated about how to configure Logstash. It exposes ways to set environment variables and mount secrets inside of the container. Doing this makes it much easier for this chart to support multiple versions with minimal changes.
logstash.ymlconfiguration files can be set either by a ConfigMap usinglogstashConfiginvalues.ymlor by environment variables usingextraEnvsinvalues.yml, however Logstash Docker image can't mix both methods as defining settings with environment variables causeslogstash.ymlto be modified in place while using ConfigMap bind-mount the same file (more details in this note).- When overriding
logstash.yml,http.host: 0.0.0.0should always be included to make default probes work. If restricting HTTP API to 127.0.0.1 is required by usinghttp.host: 127.0.0.1, default probes should be disabled or overrided (see values.yaml for the good syntax). - An ingress is provided that can be used to expose the HTTP port. This can be useful for the http input plugin, for instance.
| Parameter | Description | Default |
|---|---|---|
antiAffinityTopologyKey |
The anti-affinity topology key]. By default this will prevent multiple Logstash nodes from running on the same Kubernetes node | kubernetes.io/hostname |
antiAffinity |
Setting this to hard enforces the anti-affinity rules. If it is set to soft it will be done "best effort". Other values will be ignored | hard |
envFrom |
Templatable string to be passed to the environment from variables which will be appended to the envFrom: definition for the container |
[] |
extraContainers |
Templatable string of additional containers to be passed to the tpl function |
"" |
extraEnvs |
Extra environment variables which will be appended to the env: definition for the container |
[] |
extraInitContainers |
Templatable string of additional initContainers to be passed to the tpl function |
"" |
extraPorts |
An array of extra ports to open on the pod | [] |
extraVolumeMounts |
Templatable string of additional volumeMounts to be passed to the tpl function |
"" |
extraVolumes |
Templatable string of additional volumes to be passed to the tpl function |
"" |
fullnameOverride |
Overrides the full name of the resources. If not set the name will default to " .Release.Name - .Values.nameOverride or .Chart.Name " |
"" |
httpPort |
The http port that Kubernetes will use for the healthchecks and the service | 9600 |
imagePullPolicy |
The Kubernetes imagePullPolicy value | IfNotPresent |
imagePullSecrets |
Configuration for imagePullSecrets so that you can use a private registry for your image | [] |
imageTag |
The Logstash Docker image tag | 8.0.0-SNAPSHOT |
image |
The Logstash Docker image | docker.elastic.co/logstash/logstash |
labels |
Configurable labels applied to all Logstash pods | {} |
ingress |
Configurable ingress for external access to Logstash HTTP port. | see values.yaml |
lifecycle |
Allows you to add lifecycle configuration. See values.yaml for an example of the formatting | {} |
livenessProbe |
Configuration fields for the liveness probe | see values.yaml |
logstashConfig |
Allows you to add any config files in /usr/share/logstash/config/ such as logstash.yml and log4j2.properties See values.yaml for an example of the formatting |
{} |
logstashJavaOpts |
Java options for Logstash. This is where you should configure the JVM heap size | -Xmx1g -Xms1g |
logstashPipeline |
Allows you to add any pipeline files in /usr/share/logstash/pipeline/ |
{} |
maxUnavailable |
The maxUnavailable value for the pod disruption budget. By default this will prevent Kubernetes from having more than 1 unhealthy pod in the node group | 1 |
nameOverride |
Overrides the chart name for resources. If not set the name will default to .Chart.Name |
"" |
nodeAffinity |
Value for the node affinity settings | {} |
nodeSelector |
Configurable nodeSelector so that you can target specific nodes for your Logstash cluster | {} |
persistence |
Enables a persistent volume for Logstash data | see values.yaml |
podAnnotations |
Configurable annotations applied to all Logstash pods | {} |
podManagementPolicy |
By default Kubernetes deploys StatefulSets serially. This deploys them in parallel so that they can discover each other | Parallel |
podSecurityContext |
Allows you to set the securityContext for the pod | see values.yaml |
podSecurityPolicy |
Configuration for create a pod security policy with minimal permissions to run this Helm chart with create: true Also can be used to reference an external pod security policy with name: "externalPodSecurityPolicy" |
see values.yaml |
priorityClassName |
The name of the PriorityClass. No default is supplied as the PriorityClass must be created first | "" |
rbac |
Configuration for creating a role, role binding and service account as part of this Helm chart with create: true Also can be used to reference an external service account with serviceAccountName: "externalServiceAccountName" |
see values.yaml |
readinessProbe |
Configuration fields for the readiness probe | see values.yaml |
replicas |
Kubernetes replica count for the StatefulSet (i.e. how many pods) | 1 |
resources |
Allows you to set the resources for the StatefulSet | see values.yaml |
schedulerName |
Name of the alternate scheduler | "" |
secrets |
Allows you easily create a secret from as variables or file. For add secrets from file, add suffix .filepath to the key of secret key. The value will be encoded to base64. Useful for store certificates and other secrets. |
See values.yaml |
secretMounts |
Allows you easily mount a secret as a file inside the StatefulSet. Useful for mounting certificates and other secrets. See values.yaml for an example | [] |
securityContext |
Allows you to set the securityContext for the container | see values.yaml |
service |
Configurable service to expose the Logstash service. | see values.yaml |
terminationGracePeriod |
The terminationGracePeriod in seconds used when trying to stop the pod | 120 |
tolerations |
Configurable tolerations | [] |
updateStrategy |
The updateStrategy for the StatefulSet. By default Kubernetes will wait for the cluster to be green after upgrading each pod. Setting this to OnDelete will allow you to manually delete each pod during upgrades |
RollingUpdate |
volumeClaimTemplate |
Configuration for the volumeClaimTemplate for StatefulSets. You will want to adjust the storage (default 30Gi ) and the storageClassName if you are using a different storage class |
see values.yaml |
Deploying OSS version of Elasticsearch can be done by setting image value to
Logstash OSS Docker image
An example of Logstash deployment using OSS version can be found in examples/oss.
The recommended way to install plugins into our Docker images is to create a custom Docker image.
The Dockerfile would look something like:
ARG logstash_version
FROM docker.elastic.co/logstash/logstash:${logstash_version}
RUN bin/logstash-plugin install logstash-output-kafka
And then updating the image in values to point to your custom image.
There are a couple reasons we recommend this:
- Tying the availability of Logstash to the download service to install plugins is not a great idea or something that we recommend. Especially in Kubernetes where it is normal and expected for a container to be moved to another host at random times.
- Mutating the state of a running Docker image (by installing plugins) goes against best practices of containers and immutable infrastructure.
Please check CONTRIBUTING.md before any contribution or for any questions about our development and testing process.