etc##skel##.ncmpcpp##config

#This file is part of the minos-desktop-settings package

##### connection settings #####
## set it in order to make tag editor and renaming files work properly
#mpd_host               = "localhost"
#mpd_port               = "6600"
#mpd_music_dir          = ""
mpd_connection_timeout = "5"
mpd_crossfade_time     = "1"
#mpd_communication_mode = "notifications" (polling/notifications)

##### music visualizer #####
## Note: In order to make music visualizer work you'll
## need to use mpd fifo output, whose format parameter
## has to be set to 44100:16:1. Example configuration:
## (it has to be put into mpd.conf)
##
## audio_output {
##        type            "fifo"
##        name            "My FIFO"
##        path            "/tmp/mpd.fifo"
##        format          "44100:16:1"
## }
##
visualizer_fifo_path     = "/tmp/mpd.fifo"

## Note: Below parameter is needed for ncmpcpp
## to determine which output provides data for
## visualizer and thus allow syncing between
## visualization and sound as currently there
## are some problems with it.
##
visualizer_output_name   = "FIFO"

## Note: Below parameter defines how often ncmpcpp
## has to "synchronize" visualizer and audio outputs.
## 30 seconds is optimal value, but if you experience
## synchronization problems, set it to lower value.
## Keep in mind that sane values start with >=10.
##
visualizer_sync_interval = "20"

## Note: To enable spectrum frequency visualization
## you need to compile ncmpcpp with fftw3 support.
##
visualizer_type          = "wave" (spectrum/wave)
#visualizer_type = "spectrum" (spectrum/wave)

##### system encoding #####
##
## ncmpcpp should detect your charset encoding
## but if it failed to do so, you can specify
## charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build
## supports charset detection by checking output
## of `ncmpcpp --version`.
##
## Note: Since MPD uses utf8 by default, setting
## this option makes sense only if your encoding
## is different.
##
#system_encoding = ""

##### delays #####
## delay after playlist highlighting will be disabled (0 = don't disable)
playlist_disable_highlight_delay = "0"
## defines how long various messages are supposed to be visible
message_delay_time               = "5"
##### song format #####
## for song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - year
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## $R - begin right alignment
##
## you can also put them in { } and then it will be displayed
## only if all requested values are available and/or define alternate
## value with { }|{ } eg. {%a - %t}|{%f}
##
## Note: Format that is similar to "%a - %t" (i.e. without any additional
## braces) is equal to "{%a - %t}", so if one of the tags is missing,
## you'll get nothing.
##
## text can also have different color than the main window has,
## eg. if you want length to be green, write $3%l$9
##
## available values:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
## Note: colors can be nested.
song_list_format        = "{%a - }{%t}|{$8%f$9}$R{$3(%l)$9}"
song_status_format      = "{{%a{ \"%b\"{ (%y)}} - }{%t}}|{%f}"
song_library_format     = "{%n - }{%t}|{%f}"
#tag_editor_album_format = "{(%y) }%b"

## Note: Below variables are for alternative version of user's interface.
## Their syntax supports all tags and colors listed above plus some extra
## markers used for text attributes. They are followed by character '$'.
## After that you can put:
##
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use an attribute anymore, just put it again, but
## this time insert character '/' between '$' and attribute character,
## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename
## with reversed colors.
alternative_header_first_line_format  = "$b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b"
alternative_header_second_line_format = "{{$4%a$9}{ - $7%b$9}}|{%D}"

## Note: Below variables also supports
## text attributes listed above.
now_playing_prefix       = "$b$u"
now_playing_suffix       = "$/b$/u"
browser_playlist_prefix  = "$2playlist$9 "
selected_item_prefix     = "$6"
selected_item_suffix     = "$9"
## colors are not supported for below variable
song_window_title_format = "{%a - }{%t}|{%f}"

##### columns settings #####
##
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of column)[column's color]{displayed tag}
##
## Note: Width is by default in %, if you want a column to
## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
## will be the column that take 10% of screen (so the real column's
## width will depend on actual screen size), whereas (10f)[white]{a}
## will take 10 terminal cells, no matter how wide the screen is.
##
## - color is optional (if you want the default one, type [])
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes,
##   separated with character ':', e.g. {lr:Length} gives you
##   right aligned column of lengths named "Length".
##
## - define sequence of tags, that have to be displayed in case
##   predecessor is empty in a way similar to the one in classic
##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
##   creates column named "Owner" that tries to display artist
##   tag and then composer and performter if previous ones are
##   not available.
song_columns_list_format = "(7f)[yellow]{l} (40)[cyan]{t|f} (25)[blue]{a} (30)[blue]{b}"

##### various settings #####
## Note: Custom command that will be executed each
## time song changes. Useful for notifications etc.
##
## Attention: It doesn't support song format anymore.
## Use `ncmpcpp --now-playing SONG_FORMAT` instead.
##
execute_on_song_change             = ""
playlist_show_remaining_time       = "no"
playlist_shorten_total_times       = "yes"
playlist_separate_albums           = "no"
playlist_display_mode              = "columns" (classic/columns)
browser_display_mode               = "columns" (classic/columns)
search_engine_display_mode         = "classic" (classic/columns)
discard_colors_if_item_is_selected = "yes"
incremental_seeking                = "yes"
seek_time                          = "1"
autocenter_mode                    = "yes"
centered_cursor                    = "yes"
#progressbar_look                  = "=]"
progressbar_look                   = "╼╼─"
#progressbar_look                  = "▉▉ "
default_place_to_search_in         = "database" (database/playlist)
user_interface                     = "alternative" (classic/alternative)
#media_library_left_column          = "a" (possible values: a,y,g,c,p, legend above)
default_find_mode                  = "wrapped" (wrapped/normal)
#default_space_mode                 = "add" (add/select)
#default_tag_editor_left_col = "albums" (albums/dirs)
#default_tag_editor_left_col        = "dirs" (albums/dirs)
default_tag_editor_pattern         = "%n - %t"
header_visibility                  = "yes"
statusbar_visibility               = "yes"
header_text_scrolling              = "yes"
#fancy_scrolling                    = "yes"
cyclic_scrolling                   = "no"
lines_scrolled                     = "2"
follow_now_playing_lyrics          = "yes"
#ncmpc_like_songs_adding            = "yes" (enabled - add/remove, disabled - always add)
show_hidden_files_in_local_browser = "no"
#display_screens_numbers_on_start   = "yes"

## How shall key_screen_switcher work?
##
## - "previous" - switch between current and last used screen
## - "sequence: 2 -> 9 -> 5" - switch between given sequence of screens.
##
## Screen numbers you can use after 'sequence' keyword are:
##
## - 1 - help
## - 2 - playlist
## - 3 - browser
## - 4 - search engine
## - 5 - media library
## - 6 - playlist editor
## - 7 - tag editor
## - 8 - outputs
## - 9 - visualizer
## - 10 - clock
##
## As you can see, above example will switch between
## playlist, visualizer and media library screens.
##
#screen_switcher_mode                           = "sequence: 2 -> 3"

## Note: You can define startup screen for ncmpcpp
## by choosing screen number from the list above.
#startup_screen                                 = "2"
jump_to_now_playing_song_at_start              = "yes"
#ask_before_clearing_main_playlist              = "yes"
clock_display_seconds                          = "yes"
display_volume_level                           = "yes"
display_bitrate                                = "yes"
display_remaining_time                         = "no"
regular_expressions                            = "basic" (basic/extended)

## Note: If below is enabled, ncmpcpp will ignore leading
## "The" word while sorting items in browser, tags in
## media library, etc.
ignore_leading_the                             = "yes"
block_search_constraints_change_if_items_found = "yes"
mouse_support                                  = "yes"
mouse_list_scroll_whole_page                   = "yes"
empty_tag_marker                               = "[empty]"
tag_editor_extended_numeration                 = "no"
#media_library_display_date                     = "yes"
#media_library_disable_two_column_mode          = "no"
enable_window_title                            = "yes"

## Note: You can choose default search mode for search
## engine. Available modes are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
##       but if your mpd is on a remote machine, downloading big database
##       to process it can take a while
## - 3 - match only exact values (this mode uses mpd function for searching
##       in database and local one for searching in current playlist)
#search_engine_default_search_mode = "1"

## Note: Below variables can allow you to physically
## remove files and directories from your hdd using
## ncmpcpp's browser screen.
#allow_physical_files_deletion       = "no"
#allow_physical_directories_deletion = "no"

##### lyrics support #####
##
## supported lyrics databases:
##
## - 1 - lyricsplugin.com
##
#lyrics_database                = "1"
external_editor                = "vim"
use_console_editor             = "yes" (set to yes, if your editor is console app)

##### colors definitions #####
colors_enabled                 = "yes"
empty_tag_color                = "black"
#header_window_color            = "blue"
#header_window_color            = "gray"
volume_color                   = "blue"
state_line_color               = "black"
state_flags_color              = "cyan"
main_window_color              = "blue"
color1                         = "blue"
color2                         = "cyan"
main_window_highlight_color    = "cyan"
progressbar_color              = "white"
statusbar_color                = "blue"
alternative_ui_separator_color = "blue"
active_column_color            = "red"
window_border_color            = "green"
active_window_border           = "red"
visualizer_color               = "white"