All STLs only need to be printed once, and in any filament type you'd like.
| STL |
|---|
| duplicator i3 duet x motor ptfe inner clamp.stl |
| duplicator i3 duet x motor ptfe outer clamp.stl |
| Tool | Link | Notes |
|---|---|---|
| Screw Driver Set | Amazon | Must contain a variety of Hex head drivers |
Note that several of the links are to parts assortments, and a single assortment should cover all of the parts of that type. Obviously, you can also source parts elsewhere if desired, the linked ones are just a convenient option.
| Item | Quantity | Link | Notes |
|---|---|---|---|
| PTFE Tubing 2mm ID | 500 mm | Filastruder | This is an approximation, purchase all PTFE tubing in a single length and cut to size. |
| M3 6mm Socket Cap Machine Screws | 4 | Amazon | If you've done the Z brace upgrade, then you likely have enough screws left over from that. |
| M3 Washers | 4 | Amazon | |
| M3 Hex Nuts | 4 | Amazon |
