Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

OpenBCI v3 Battery Connector #2

Open
jnaulty opened this issue Nov 27, 2014 · 1 comment
Open

OpenBCI v3 Battery Connector #2

jnaulty opened this issue Nov 27, 2014 · 1 comment

Comments

@jnaulty
Copy link

jnaulty commented Nov 27, 2014

Hey OpenBCI Crew!
I finally got the chance to check out the v3 board. Unfortunately, I don't have a 4XAA Battery pack. More importantly, I don't have the female connector to power the device. Do you have any information regarding what type of 2 pin female connector is required to fit in the male pins on the bottom of the board?
@vaibhav2912
Copy link

https://github.com/OpenBCI/Docs/blob/master/hardware/01-OpenBCI_Hardware.md

This is the OpenBCI hardware documentation. Look in the first paragraph. It says 'The battery connector is a standard JST type two position (with polarity key at the TOP), and the SD card holder that we are using is ST-TF-003A.'

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@jnaulty @vaibhav2912