diff --git a/iso/airootfs/etc/mkinitcpio.conf b/iso/airootfs/etc/mkinitcpio.conf
deleted file mode 100644
index f57dbdd..0000000
--- a/iso/airootfs/etc/mkinitcpio.conf
+++ /dev/null
@@ -1,67 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run.  Advanced users may wish to specify all system modules
-# in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
-MODULES=()
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image.  This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way.  This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file.  The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
-#    HOOKS=(base)
-#
-##   This setup will autodetect all modules for your system and should
-##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
-#
-##   This setup will generate a 'full' image which supports most systems.
-##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
-#
-##   This setup assembles a pata mdadm array with an encrypted root FS.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
-#
-##   This setup loads an lvm2 volume group on a usb device.
-#    HOOKS=(base udev block lvm2 filesystems)
-#
-##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
-HOOKS=(base udev modconf memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
-COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-#COMPRESSION="zstd"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()
diff --git a/iso/airootfs/etc/mkinitcpio.conf.d/archiso.conf b/iso/airootfs/etc/mkinitcpio.conf.d/archiso.conf
new file mode 100644
index 0000000..b4b3095
--- /dev/null
+++ b/iso/airootfs/etc/mkinitcpio.conf.d/archiso.conf
@@ -0,0 +1,2 @@
+HOOKS=(base udev modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
+COMPRESSION="xz"
diff --git a/iso/airootfs/etc/mkinitcpio.d/linux.preset b/iso/airootfs/etc/mkinitcpio.d/linux.preset
index 9f67184..7f51749 100644
--- a/iso/airootfs/etc/mkinitcpio.d/linux.preset
+++ b/iso/airootfs/etc/mkinitcpio.d/linux.preset
@@ -3,6 +3,7 @@
 PRESETS=('archiso')
 
 ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
+archiso_config='/etc/mkinitcpio.conf.d/archiso.conf'
 
 archiso_image="/boot/initramfs-linux.img"
+
diff --git a/iso/airootfs/etc/mkinitcpio.d/parch b/iso/airootfs/etc/mkinitcpio.d/parch
deleted file mode 100644
index 15878c6..0000000
--- a/iso/airootfs/etc/mkinitcpio.d/parch
+++ /dev/null
@@ -1,14 +0,0 @@
-# mkinitcpio preset file for the 'linux' package on archiso
-
-PRESETS=('default' 'fallback')
-
-ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
-
-#default_config="/etc/mkinitcpio.conf"
-default_image="/boot/initramfs-linux.img"
-#default_options=""
-
-#fallback_config="/etc/mkinitcpio.conf"
-fallback_image="/boot/initramfs-linux-fallback.img"
-fallback_options="-S autodetect"
diff --git a/iso/efiboot/loader/entries/01-archiso-x86_64-linux.conf b/iso/efiboot/loader/entries/01-archiso-x86_64-linux.conf
index a536117..c724ea3 100644
--- a/iso/efiboot/loader/entries/01-archiso-x86_64-linux.conf
+++ b/iso/efiboot/loader/entries/01-archiso-x86_64-linux.conf
@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI)
 sort-key 01
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
diff --git a/iso/efiboot/loader/entries/02-archiso-x86_64-speech-linux.conf b/iso/efiboot/loader/entries/02-archiso-x86_64-speech-linux.conf
index c5270dc..57a5424 100644
--- a/iso/efiboot/loader/entries/02-archiso-x86_64-speech-linux.conf
+++ b/iso/efiboot/loader/entries/02-archiso-x86_64-speech-linux.conf
@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI) with speech
 sort-key 02
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
diff --git a/iso/efiboot/loader/entries/03-archiso-x86_64-ram-linux.conf b/iso/efiboot/loader/entries/03-archiso-x86_64-ram-linux.conf
index 1805d1e..4008cdc 100644
--- a/iso/efiboot/loader/entries/03-archiso-x86_64-ram-linux.conf
+++ b/iso/efiboot/loader/entries/03-archiso-x86_64-ram-linux.conf
@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI, Copy to RAM)
 sort-key 03
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram
diff --git a/iso/efiboot/loader/entries/04-archiso-x86_64-ram-speech-linux.conf b/iso/efiboot/loader/entries/04-archiso-x86_64-ram-speech-linux.conf
index f29737c..deba523 100644
--- a/iso/efiboot/loader/entries/04-archiso-x86_64-ram-speech-linux.conf
+++ b/iso/efiboot/loader/entries/04-archiso-x86_64-ram-speech-linux.conf
@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI, Copy to RAM) with speech
 sort-key 04
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram accessibility=on
diff --git a/iso/efiboot/loader/entries/05-archiso-x86_64-compatibility-mode-linux.conf b/iso/efiboot/loader/entries/05-archiso-x86_64-compatibility-mode-linux.conf
new file mode 100644
index 0000000..98d9da2
--- /dev/null
+++ b/iso/efiboot/loader/entries/05-archiso-x86_64-compatibility-mode-linux.conf
@@ -0,0 +1,5 @@
+title    Parch Linux install compatibility medium (x86_64, UEFI)
+sort-key 05
+linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% nomodset
diff --git a/iso/efiboot/loader/loader.conf b/iso/efiboot/loader/loader.conf
index 982641e..2d137aa 100644
--- a/iso/efiboot/loader/loader.conf
+++ b/iso/efiboot/loader/loader.conf
@@ -1,3 +1,3 @@
 timeout 15
 default 01-archiso-x86_64-linux.conf
-beep off
+beep on
diff --git a/iso/grub/grub.cfg b/iso/grub/grub.cfg
index 2fdc1ff..8c68f7f 100644
--- a/iso/grub/grub.cfg
+++ b/iso/grub/grub.cfg
@@ -29,14 +29,14 @@ menuentry "Parch Linux install medium (x86_64, UEFI)" {
     set gfxpayload=keep
     search --no-floppy --set=root --label %ARCHISO_LABEL%
     linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
-    initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+    initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "Parch Linux install medium with speakup screen reader (x86_64, UEFI)" --hotkey=s {
     set gfxpayload=keep
     search --no-floppy --set=root --label %ARCHISO_LABEL%
     linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
-    initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+    initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "UEFI Shell" {
diff --git a/iso/pacman.conf b/iso/pacman.conf
index 12b4c71..4794755 100644
--- a/iso/pacman.conf
+++ b/iso/pacman.conf
@@ -34,7 +34,7 @@ Architecture = auto
 #NoProgressBar
 CheckSpace
 #VerbosePkgLists
-ParallelDownloads = 5
+#ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -87,8 +87,8 @@ Include = /etc/pacman.d/mirrorlist
 #[multilib-testing]
 #Include = /etc/pacman.d/mirrorlist
 
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist
+[multilib]
+Include = /etc/pacman.d/mirrorlist
 
 [ppr]
 SigLevel = Optional TrustedOnly
diff --git a/iso/profiledef.sh b/iso/profiledef.sh
index 0079778..c040aa5 100644
--- a/iso/profiledef.sh
+++ b/iso/profiledef.sh
@@ -9,8 +9,8 @@ iso_version="$(date +%Y.%m.%d)"
 install_dir="arch"
 buildmodes=('iso')
 bootmodes=('bios.syslinux.mbr' 'bios.syslinux.eltorito'
-	   'uefi-ia32.grub.esp' 'uefi-x64.systemd-boot.esp'
-	   'uefi-ia32.grub.eltorito' 'uefi-x64.systemd-boot.eltorito')
+	   'uefi-x64.systemd-boot.esp'
+	    'uefi-x64.systemd-boot.eltorito')
 arch="x86_64"
 pacman_conf="pacman.conf"
 airootfs_image_type="squashfs"
diff --git a/iso/syslinux/archiso_sys-linux.cfg b/iso/syslinux/archiso_sys-linux.cfg
index aa63aa1..36d9981 100644
--- a/iso/syslinux/archiso_sys-linux.cfg
+++ b/iso/syslinux/archiso_sys-linux.cfg
@@ -5,7 +5,7 @@ It allows you to install Parch Linux or perform system maintenance.
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
 
 # Accessibility boot option
@@ -16,7 +16,7 @@ It allows you to install Parch Linux or perform system maintenance with speech f
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS) with ^speech
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
 
 # Copy to RAM boot option
@@ -27,5 +27,17 @@ It allows you to install Parch Linux or perform system maintenance.
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS, Copy to RAM)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram
+
+
+#  compatibility boot option
+LABEL arch64compatibility
+TEXT HELP
+Boot the Parch Linux install medium on BIOS with compatibility mode.
+It allows you to install Parch Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Parch Linux install medium (x86_64, BIOS, compatibility)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% nomodset
diff --git a/iso/syslinux/splash.png b/iso/syslinux/splash.png
index 0ee436c..885cf10 100644
Binary files a/iso/syslinux/splash.png and b/iso/syslinux/splash.png differ