Wall Switch (relay) DS-PM1-O1H-WE: Can not switch it off and status is not read correctly

[Nick2691]

Hello,
I have Wall Switch (relay) DS-PM1-O1H-WE.
and it does not work properly (always OFF).
home-assistant_hikvision_axpro_2024-02-06T10-10-58.800Z.log

[petrleocompel]

Did you waited "pull interval" before checking?

[petrleocompel]

I will go through logs but question is did you "flipped the stage" and got logs after (it will contain both states, on and off) and how is your switch called in your settings?

[Nick2691]

Did you waited "pull interval" before checking?

Pull interval is 5 (seconds?). Yes, I did

[petrleocompel]

Did you waited "pull interval" before checking?

Pull interval is 5 (seconds?). Yes, I did

It is configurable (default 30 seconds)

[Nick2691]

I switch using this interface

[petrleocompel]

In configuration of the integration is configurable pull interval (in seconds)

That is the time required to "update the state"

[petrleocompel]

I will check the logs and I will see if it is an error or just "it takes time"

[Nick2691]

I set pull interval to 5

[muratmnf]

I'm having the same problem. After you turn the switch, it turns off within 30 seconds, but it is actually still on.

[petrleocompel]

@muratmnf Are you sure you have the same problem or the switch turns to desired state in HA after like 30 seconds ?

The "state" for external change is based on pull interval from configuration. If you trigger switch in mobile app it will take time from last pull interval + pull interval time (so max pull interval time = default is 30 sec) to update the state in HA.

[petrleocompel]

Any update on this ? @muratmnf

[petrleocompel]

In case of no activity - i will close the issue on end of the week. @Nick2691 @muratmnf

[Nick2691]

I still have this problem

[petrleocompel]

Last message from you is that you set the pull interval to 5 seconds.

[Nick2691]

Last message from you is that you set the pull interval to 5 seconds.

And the problem is still the same (

[petrleocompel]

I am trying to search deeper into this but currently in the "log" you sent I am unsure what "relay" (by name or id) should I look for.

I am using "relay" every day via HA. But not "external" but internal on board. But the API for controlling external and internal is the same.

So to see more I need to know "name" of the relay what to look for. I will try to replay from the logs state of your system.
Is it Реле насос вода ?

Also the logs are cut. Does not contain initialization of the integration. To fully replay / simulate the issue I really need that.

[Nick2691]

The name of the relay is Реле насос вода.
I can make new logs in 5-7 days.

[Nick2691]

home-assistant.log
This is the log

[petrleocompel]

Thanks I will take a look.