Skip to content

Latest commit

 

History

History
99 lines (71 loc) · 4.17 KB

File metadata and controls

99 lines (71 loc) · 4.17 KB

Home Assistant Component for Qubino Wire Pilot

Home Assistant Component for Qubino Wire Pilot

CleanShot 2024-09-04 at 12 36 52

Introduction

The Qubino ZMNHJD1 is not recognized as a thermostat in Home Assistant but as a light.

The brightness percentage of the light entity is mapped to a mode.

Value Min Max
Off 0% 10%
Frost protection 11% 20%
Eco 21% 30%
Comfort -2 31% 40%
Comfort -1 41% 50%
Comfort 51% 100%

This integrtion create an climate entity using the light entity for easy control of your heater.

The climate will have 2 modes :

  • heat - splitted into 3 or 5 presets :
    • comfort - mapped qubino "Comfort" mode
    • comfort-1 - mapped qubino "Comfort -1" mode (optional)
    • comfort-2 - mapped qubino "Comfort -2" mode (optional)
    • eco - mapped qubino "Eco" mode
    • away - mapped qubino "Frost protection" mode
  • off - mapped qubino "Off" mode :

⚠️ "Comfort -1" and "Comfort -2" are not available by default because home assistant doesn't have comfort-1 and comfort-2 preset. If you want to support these modes, add additional_modes: true in your configuration.

Installation

You can convert the light to a climate entity by searching "Qubino Wire Pilot" in the integration page or helper page.

YAML configuration

If you prefer to use yaml, you can, but it's not recommended as more and more integrations are moved to the UI. All the options are available in the UI.

Key Type Required Description
platform string yes Platform name
heater string yes Light entity
sensor string no Temperature sensor (for display)
additional_modes boolean no 6-order support (add Comfort -1 and Comfort -2 preset)
name string no Name to use in the frontend.
unique_id string no An ID that uniquely identifies this climate. If two climates have the same unique ID, Home Assistant will raise an error.

The unique id is recommended to allow icon, entity_id or name changes from the UI.

Example

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer

with 6 order

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    additional_modes: true

with optional sensor

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    sensor: sensor.temperature_living_room

Unique ID

The unique_id is used to edit the entity from the GUI. It's automatically generated from heater entity_id. As the unique_id must be unique, you can not create 2 entities with the same heater.

If you want to have 2 climate with the same heater, you must specify the unique_id in the config.

climate:
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    unique_id: qubino_heater_living_room_1
  - platform: qubino_wire_pilot
    heater: light.heater_living_room_dimmer
    unique_id: qubino_heater_living_room_2

Lovelace

You can use the climate-mode-entity-row card in your lovelace dashboard to easily switch between modes.