diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README index 3404238c93f1d2..12505ee70dd999 100644 --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -378,9 +378,9 @@ Params: non-lite SKU of CM4). (default "on") - sd_cqe Use to enable Command Queueing on the SD - interface for faster Class A2 card performance - (Pi 5 only, default "off") + sd_cqe Set to "off" to disable Command Queueing if you + have an incompatible Class A2 SD card + (Pi 5 only, default "on") sd_overclock Clock (in MHz) to use when the MMC framework requests 50MHz diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 2b6b0cc91cc402..71df9ebda7088a 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -365,6 +365,7 @@ dpi_16bit_gpio2: &rp1_dpi_16bit_gpio2 { }; sd-uhs-sdr50; sd-uhs-ddr50; sd-uhs-sdr104; + supports-cqe; cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>; //no-1-8-v; status = "okay";