SelectiveWarp

=============== Selective Warp ===============

# If you want to pass only the traffic of the selected sites through the warp, use this method.

1.-------------------------------------------------------------------------------------------------------------------------------------------------

wget https://github.com/ViRb3/wgcf/releases/download/v2.2.16/wgcf_2.2.16_linux_amd64
chmod +x wgcf_2.2.16_linux_amd64
mv wgcf_2.2.16_linux_amd64 /usr/bin/wgcf
rm wgcf_2.2.16_linux_amd64

2.-------------------------------------------------------------------------------------------------------------------------------------------------

wgcf register
wgcf generate

3.-------------------------------------------------------------------------------------------------------------------------------------------------

nano wgcf-account.toml

4.-------------------------------------------------------------------------------------------------------------------------------------------------

# Insert The Warp+ License between '' like below:
license_key = '0F9i2RE8-q0n8M6R7-230ztB7B'
# now you must save (Ctrl+X y Enter)
# (You can get the warp+ License form this Telegram bot : https://t.me/generatewarpplusbot)

5.-------------------------------------------------------------------------------------------------------------------------------------------------

wgcf update
wgcf generate

6.-------------------------------------------------------------------------------------------------------------------------------------------------

nano wgcf-profile.conf

# insert  the below line before [peer]

Table = off

# save (Ctrl+X y Enter)

7.-------------------------------------------------------------------------------------------------------------------------------------------------

mkdir /etc/wireguard

8.-------------------------------------------------------------------------------------------------------------------------------------------------

sudo apt install wireguard-dkms wireguard-tools resolvconf

# then press Y and Enter
# if you recieved Abort repeat this step

9.-------------------------------------------------------------------------------------------------------------------------------------------------

sudo cp wgcf-profile.conf /etc/wireguard/warp.conf

10.-------------------------------------------------------------------------------------------------------------------------------------------------

sudo systemctl enable --now wg-quick@warp

# For Marzban Node is enough to step 10
# For Marzban Main Panel the following steps must be performed


11.-------------------------------------------------------------------------------------------------------------------------------------------------

nano /opt/marzban/xray_config.json

12.-------------------------------------------------------------------------------------------------------------------------------------------------

# Delete the codes from the beginning of "outbounds" to the end and replace the following codes
# If you want to pass the traffic of a site (or sites) through Warp, put the domain address in the domain field between double quotes like "yahoo.com" and seprate this domains with Comma (,)

"outbounds": [
    {
      "tag": "IP-SABET",
      "protocol": "freedom",
      "settings": {}
    },
    {
      "protocol": "blackhole",
      "tag": "blackhole"
    },
    {
      "tag": "DNS-Internal",
      "protocol": "dns",
      "settings": {
        "address": "127.0.0.53",
        "port": 53
      }
    },
    {
      "tag": "warp",
      "protocol": "freedom",
      "streamSettings": {
        "sockopt": {
          "tcpFastOpen": true,
          "interface": "warp"
        }
      }
    }
  ],
  "routing": {
    "domainStrategy": "IPIfNonMatch",
    "rules": [
      {
        "type": "field",
        "outboundTag": "blackhole",
        "ip": [
          "geoip:private"
        ]
      },
      {
        "type": "field",
        "port": 53,
        "network": "tcp,udp",
        "outboundTag": "DNS-Internal"
      },
      {
        "type": "field",
        "outboundTag": "blackhole",
        "protocol": [
          "bittorrent"
        ]
      },
      {
        "outboundTag": "warp",
        "domain": [
          "آدرس سایتی که میخواهید از وارپ عبور کند",
          "آدرس سایت بعدی"
        ],
        "type": "field"
      }
    ]
  }
}