We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. Weβll occasionally send you account related emails.
Already on GitHub? Sign in to your account
ergoCub 1.0 S/N:000
the lcd (face) of the robot is completely black
while using the robot, the screen started jiggling for a while and now it is completely black.
No response
The text was updated successfully, but these errors were encountered:
Hi @steb6 ππ»
Some of the following points need your attention.
You are required to:
Please, mark the points above as solved once done.
Sorry, something went wrong.
@AntonioConsilvio do you have time to fix before the end of the week? at the "festival della scienza" demo, the face emotions will be quite important
The LCD is still broken, and we need it at the Festival della Scienza. Sorry for bothering you so much, thank you!
cc @lornat75 @maggia80
Hi, @SimoneMic, we replaced the flat cable that connects the display to the MIP-1000 board because it was damaged. For the moment the robot works!
cc @AntonioAzocar @AntonioConsilvio
AntonioConsilvio
AntonioAzocar
filippoborgogni
No branches or pull requests
Robot Name π€
ergoCub 1.0 S/N:000
Request/Failure description
the lcd (face) of the robot is completely black
Detailed context
while using the robot, the screen started jiggling for a while and now it is completely black.
Additional context
No response
How does it affect you?
No response
The text was updated successfully, but these errors were encountered: