offlineimaprc

# Offlineimap sample configuration file

# This file documents *all* possible options and can be quite scary.
# Looking for a quick start?  Take a look at offlineimap.conf.minimal.
# More details can be found in the included user documention, which is
# also available at: http://docs.offlineimap.org/en/latest/

# NOTE: Settings generally support python interpolation. This means
# values can contain python format strings which refer to other values
# in the same section, or values in a special DEFAULT section. This
# allows you for example to use common settings for multiple accounts:
#
# [Repository Gmail1]
# trashfolder: %(gmailtrashfolder)s
#
# [Repository Gmail2]
# trashfolder: %(gmailtrashfolder)s
#
# [DEFAULT]
# gmailtrashfolder = [Gmail]/Papierkorb
#
# would set the trashfolder setting for your German Gmail accounts.

# NOTE2: This implies that any '%' needs to be encoded as '%%'

##################################################
# General definitions
##################################################

[general]

# This specifies where offlineimap is to store its metadata.
# This directory will be created if it does not already exist.

#metadata = ~/.offlineimap

# This variable specifies which accounts are defined.  Separate them
# with commas.  Account names should be alphanumeric only.
# You will need to specify one section per account below.  You may
# not use "general" for an account name.

accounts = Professional, Personal, Work

# Offlineimap can synchronize more than one account at a time.  If you
# want to enable this feature, set the below value to something
# greater than 1.  To force it to synchronize only one account at a
# time, set it to 1.
#
# Note: if you are using autorefresh and have more than one account,
# you must set this number to be >= to the number of accounts you have;
# since any given sync run never "finishes" due to a timer, you will never
# sync your additional accounts if this is 1.

maxsyncaccounts = 3

# You can specify one or more user interface modules for OfflineIMAP
# to use.  OfflineIMAP will try the first in the list, and if it
# fails, the secoqnd, and so forth.
#
# The pre-defined options are:
# Blinkenlights -- A fancy (terminal) interface
# TTYUI         -- a text-based (terminal) interface
# Basic         -- Noninteractive interface suitable for cron'ing
# Quiet         -- Noninteractive interface, generates no output
#                  except for errors.
# MachineUI     -- Interactive interface suitable for machine
#                  parsing.
#
# You can override this with a command-line option -u.

#ui = basic

# If you try to synchronize messages to a folder which the IMAP server
# considers read-only, OfflineIMAP will generate a warning.  If you want
# to suppress these warnings, set ignore-readonly to yes.  Read-only
# IMAP folders allow reading but not modification, so if you try to
# change messages in the local copy of such a folder, the IMAP server
# will prevent OfflineIMAP from propagating those changes to the IMAP
# server.  Note that ignore-readonly is unrelated to the "readonly"
# setting which prevents a repository from being modified at all.

#ignore-readonly = no

########## Advanced settings

# You can give a Python source filename here and all config file
# python snippets will be evaluated in the context of that file.
# This allows you to e.g. define helper functions in the Python
# source file and call them from this config file.  You can find
# an example of this in the manual.
#
pythonfile = ~/.offlineimap.py
#

# By default, OfflineIMAP will not exit due to a network error until
# the operating system returns an error code.  Operating systems can sometimes
# take forever to notice this.  Here you can activate a timeout on the
# socket.  This timeout applies to individual socket reads and writes,
# not to an overall sync operation.  You could perfectly well have a 30s
# timeout here and your sync still take minutes.
#
# Values in the 30-120 second range are reasonable.
#
# The default is to have no timeout beyond the OS.  Times are given in seconds.
#
# socktimeout = 60

# By default, OfflineIMAP will use fsync() to force data out to disk at
# opportune times to ensure consistency.  This can, however, reduce
# performance.  Users where /home is on SSD (Flash) may also wish to reduce
# write cycles.  Therefore, you can disable OfflineIMAP's use of fsync().
# Doing so will come at the expense of greater risk of message duplication
# in the event of a system crash or power loss.  Default is fsync = true.
# Set fsync = false to disable fsync.
#
# fsync = true

##################################################
# Mailbox name recorder
##################################################

[mbnames]

# offlineimap can record your mailbox names in a format you specify.
# You can define the header, each mailbox item, the separator,
# and the footer.  Here is an example for Mutt.
# If enabled is yes, all six setting must be specified, even if they
# are just the empty string "".
#
# The header, peritem, sep, and footer are all Python expressions passed
# through eval, so you can (and must) use Python quoting.
#
# The following hash key are available to the expansion for 'peritem':
# - accountname: the name of the corresponding account;
# - foldername: the name of the folder;
# - localfolders: path to the local directory hosting all Maildir
#   folders for the account.

enabled = no
filename = ~/Mutt/muttrc.mailboxes
header = "mailboxes "
peritem = "+%(accountname)s/%(foldername)s"
sep = " "
footer = "\n"

# You can also specify a folderfilter.  It will apply to the
# *translated* folder name here, and it takes TWO arguments:
# accountname and foldername.  In all other ways, it will
# behave identically to the folderfilter for accounts.  Please see
# that section for more information and examples.
#
# Note that this filter can be used only to further restrict mbnames
# to a subset of folders that pass the account's folderfilter.
#
#
# You can customize the order in which mailbox names are listed in the
# generated file by specifying a sort_keyfunc, which takes a single
# dict argument containing keys 'accountname' and 'foldername'.  This
# function will be called once for each mailbox, and should return a
# suitable sort key that defines this mailbox' position in the custom
# ordering.
#
# This is useful with e.g. Mutt-sidebar, which uses the mailbox order
# from the generated file when listing mailboxes in the sidebar.
#
# Default setting is
# sort_keyfunc = lambda d: (d['accountname'], d['foldername'])


##################################################
# Accounts
##################################################

# This is an account definition clause.  You'll have one of these
# for each account listed in general/accounts above.

[Account Professional]

localrepository = GmailLocalProfessional
remoterepository = GmailProfessional
autorefresh = 5
quick = 10
synclabels = yes

[Account Work]

localrepository = LocalWork
remoterepository = Work
autorefresh = 5
quick = 10

[Account Personal]

localrepository = GmailLocalPersonal
remoterepository = GmailPersonal

########## Advanced settings

# You can have offlineimap continue running indefinitely, automatically
# syncing your mail periodically.  If you want that, specify how
# frequently to do that (in minutes) here.  You can also specify
# fractional minutes (ie, 3.25).

autorefresh = 5

# OfflineImap can replace a number of full updates by quick
# synchronizations.  It only synchronizes a folder if 1) a Maildir
# folder has changed, or 2) if an IMAP folder has received new messages
# or had messages deleted, ie it does not update if only IMAP flags have
# changed.  Full updates need to fetch ALL flags for all messages, so
# this makes quite a performance difference (especially if syncing
# between two IMAP servers).
# Specify 0 for never, -1 for always (works even in non-autorefresh
# mode), or a positive integer <n> to do <n> quick updates before doing
# another full synchronization (requires autorefresh).  Updates are
# always performed after <autorefresh> minutes, be they quick or full.

quick = 10

# You can specify a pre and post sync hook to execute a external command.
# In this case a call to imapfilter to filter mail before the sync process
# starts and a custom shell script after the sync completes.
# The pre sync script has to complete before a sync to the account will
# start.

# presynchook = imapfilter
postsynchook = notmuch new

# You can also specify parameters to the commands
# presynchook = imapfilter -c someotherconfig.lua

# OfflineImap caches the state of the synchronisation to e.g. be able to
# determine if a mail has been deleted on one side or added on the
# other.
#
# The default and historical backend is 'plain' which writes out the
# state in plain text files. On Repositories with large numbers of
# mails, the performance might not be optimal, as we write out the
# complete file for each change.  Another new backend 'sqlite' is
# available which stores the status in sqlite databases.
#
# If you switch the backend, you may want to delete the old cache
# directory in ~/.offlineimap/Account-<account>/LocalStatus manually
# once you are sure that things work.
#
#status_backend = plain

# If you have a limited amount of bandwidth available you can exclude larger
# messages (e.g. those with large attachments etc).  If you do this it
# will appear to offlineimap that these messages do not exist at all.  They
# will not be copied, have flags changed etc.  For this to work on an IMAP
# server the server must have server side search enabled.  This works with Gmail
# and most imap servers (e.g. cyrus etc)
# The maximum size should be specified in bytes - e.g. 2000000 for approx 2MB

# maxsize = 2000000


# When you are starting to sync an already existing account you can tell
# offlineimap to sync messages from only the last x days.  When you do
# this messages older than x days will be completely ignored.  This can
# be useful for importing existing accounts when you do not want to
# download large amounts of archive email.
#
# Messages older than maxage days will not be synced, their flags will
# not be changed, they will not be deleted etc.  For offlineimap it will
# be like these messages do not exist.  This will perform an IMAP search
# in the case of IMAP or Gmail and therefore requires that the server
# support server side searching.  This will calculate the earliest day
# that would be included in the search and include all messages from
# that day until today.  e.g. maxage = 3 to sync only the last 3 days
# mail
#
# maxage =


# Maildir file format uses colon (:) separator between uniq name and info.
# Unfortunatelly colon is not allowed character in windows file name. If you
# enable maildir-windows-compatible option, offlineimap will be able to store
# messages on windows drive, but you will probably loose compatibility with
# other programs working with the maildir
#
#maildir-windows-compatible = no

# Specifies if we want to sync GMail lables with the local repository.
# Effective only for GMail IMAP repositories.
#
synclabels = yes

# Name of the header to use for label storage.  Format for the header
# value differs for different headers, because there are some de-facto
# standards set by popular clients:
# - X-Label or Keywords keep values separated with spaces; for these
#   you, obviously, should not have label values that contain spaces;
# - X-Keywords use comma (',') as the separator.
# To be consistent with the usual To-like headers, for the rest of header
# types we use comma as the separator.
#
#labelsheader = X-Keywords

# Set of labels to be ignored.  Comma-separated list.  GMail-specific
# labels all start with backslash ('\').
#
#ignorelabels = \Inbox, \Starred, \Sent, \Draft, \Spam, \Trash, \Important



# OfflineIMAP can strip off some headers when your messages are propagated
# back to the IMAP server.  This option carries the comma-separated list
# of headers to trim off.  Header name matching is case-sensitive.
#
# This knob is respected only by IMAP-based accounts.  Value of labelsheader
# for GMail-based accounts is automatically added to this list, you don't
# need to specify it explicitely.
#
#filterheaders = X-Some-Weird-Header


[Repository GmailLocalProfessional]

type = GmailMaildir

localfolders = ~/Maildir/Professional

[Repository LocalWork]

type = Maildir

localfolders = ~/Maildir/Work

[Repository GmailLocalPersonal]

type = GmailMaildir

localfolders = ~/Maildir/Personal


[Repository GmailProfessional]

# A repository using Gmail's IMAP interface.  Any configuration
# parameter of `IMAP` type repositories can be used here.  Only
# `remoteuser` (or `remoteusereval` ) is mandatory.  Default values
# for other parameters are OK, and you should not need fiddle with
# those.
#
# The Gmail repository will use hard-coded values for `remotehost`,
# `remoteport`, `tunnel` and `ssl`.  (See
# http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814)
# Any attempt to set those parameters will be silently ignored.

type = Gmail
realdelete = no
synclabels = yes

# Specify the Gmail user name. This is the only mandatory parameter.
remoteuser = adam.l.washington@gmail.com
remotepasseval = get_authinfo_password("imap.gmail.com", "adam.l.washington@gmail.com")
sslcacertfile = /etc/ssl/certs/ca-certificates.crt

folderfilter = lambda foldername: foldername not in ['[Gmail]/All Mail']

# The trash folder name may be different from [Gmail]/Trash
# for example on German Gmail, this setting should be
#
# trashfolder = [Gmail]/Papierkorb
#
# You should look for the localized names of the spam folder too:
# "spamfolder" tunable will help you to override the standard name.

# Enable 1-way synchronization. See above for explanation.
#
#readonly = False
#
# To enable GMail labels synchronisation, set the option synclabels
# in the corresponding "Account" section.

# OfflineIMAP can use multiple connections to the server in order
# to perform multiple synchronization actions simultaneously.
# This may place a higher burden on the server.  In most cases,
# setting this value to 2 or 3 will speed up the sync, but in some
# cases, it may slow things down.  The safe answer is 1.  You should
# probably never set it to a value more than 5.

#maxconnections = 2

[Repository Work]

type = IMAP
realdelete = no

remotehost = 127.0.0.1
remoteuser = adam.washington@stfc.ac.uk
remotepasseval = get_authinfo_password("127.0.0.1", "adam.washington@stfc.ac.uk")
remoteport=1143
ssl=no

[Repository GmailPersonal]

type = Gmail
realdelete = no

# Specify the Gmail user name. This is the only mandatory parameter.
remoteuser = rprospero@gmail.com
remotepasseval = get_authinfo_password("imap.gmail.com", "rprospero@gmail.com")
sslcacertfile = /etc/ssl/certs/ca-certificates.crt

# folderfilter = lambda foldername: foldername not in ['[Gmail]/All Mail','Promotional']