Skip to content

Latest commit

 

History

History
1256 lines (908 loc) · 68.2 KB

README.md

File metadata and controls

1256 lines (908 loc) · 68.2 KB
Raw

iOS Pentesting


Use Trickest to easily build and automate workflows powered by the world's most advanced community tools.
Get Access Today:

{% embed url="https://trickest.com/?utm_campaign=hacktrics&utm_medium=banner&utm_source=hacktricks" %}

iOS Pentesting

☁️ HackTricks Cloud ☁️ -🐦 Twitter 🐦 - 🎙️ Twitch 🎙️ - 🎥 Youtube 🎥

iOS Basics

{% content-ref url="ios-basics.md" %} ios-basics.md {% endcontent-ref %}

Testing Environment

In this page you can find information about the iOS simulator, emulators and jailbreaking:

{% content-ref url="ios-testing-environment.md" %} ios-testing-environment.md {% endcontent-ref %}

Initial Analysis

Basic iOS Testing Operations

During the testing several operations are going to be suggested (connect to the device, read/write/upload/download files, use some tools...). Therefore, if you don't know how to perform any of these actions please, start reading the page:

{% content-ref url="basic-ios-testing-operations.md" %} basic-ios-testing-operations.md {% endcontent-ref %}

{% hint style="info" %} For the following steps the app should be installed in the device and should have already obtained the IPA file of the application.
Read the Basic iOS Testing Operations page to learn how to do this. {% endhint %}

Basic Static Analysis

It's recommended to use the tool MobSF to perform an automatic Static Analysis to the IPA file.

Identification of protections are present in the binary:

  • PIE (Position Independent Executable): When enabled, the application loads into a random memory address every-time it launches, making it harder to predict its initial memory address.

    otool -hv <app-binary> | grep PIE   # It should include the PIE flag

  • Stack Canaries: To validate the integrity of the stack, a ‘canary’ value is placed on the stack before calling a function and is validated again once the function ends.

    otool -I -v <app-binary> | grep stack_chk   # It should include the symbols: stack_chk_guard and stack_chk_fail

  • ARC (Automatic Reference Counting): To prevent common memory corruption flaws

    otool -I -v <app-binary> | grep objc_release   # It should include the _objc_release symbol

  • Encrypted Binary: The binary should be encrypted

    otool -arch all -Vl <app-binary> | grep -A5 LC_ENCRYPT   # The cryptid should be 1

Identification of Sensitive/Insecure Funcions

  • Weak Hashing Algorithms

    # On the iOS device
otool -Iv <app> | grep -w "_CC_MD5"
otool -Iv <app> | grep -w "_CC_SHA1"

# On linux
grep -iER "_CC_MD5"
grep -iER "_CC_SHA1"

  • Insecure Random Functions

    # On the iOS device
otool -Iv <app> | grep -w "_random"
otool -Iv <app> | grep -w "_srand"
otool -Iv <app> | grep -w "_rand"

# On linux
grep -iER "_random"
grep -iER "_srand"
grep -iER "_rand"

  • Insecure ‘Malloc’ Function

    # On the iOS device
otool -Iv <app> | grep -w "_malloc"

# On linux
grep -iER "_malloc"

  • Insecure and Vulnerable Functions

    # On the iOS device
otool -Iv <app> | grep -w "_gets"
otool -Iv <app> | grep -w "_memcpy"
otool -Iv <app> | grep -w "_strncpy"
otool -Iv <app> | grep -w "_strlen"
otool -Iv <app> | grep -w "_vsnprintf"
otool -Iv <app> | grep -w "_sscanf"
otool -Iv <app> | grep -w "_strtok"
otool -Iv <app> | grep -w "_alloca"
otool -Iv <app> | grep -w "_sprintf"
otool -Iv <app> | grep -w "_printf"
otool -Iv <app> | grep -w "_vsprintf"

# On linux
grep -R "_gets"
grep -iER "_memcpy"
grep -iER "_strncpy"
grep -iER "_strlen"
grep -iER "_vsnprintf"
grep -iER "_sscanf"
grep -iER "_strtok"
grep -iER "_alloca"
grep -iER "_sprintf"
grep -iER "_printf"
grep -iER "_vsprintf"

Basic Dynamic Analysis

Check out the dynamic analysis that MobSF perform. You will need to navigate through the different views and interact with them but it will be hooking several classes on doing other things and will prepare a report once you are done.

Listing Installed Apps

When targeting apps that are installed on the device, you'll first have to figure out the correct bundle identifier of the application you want to analyze. You can use frida-ps -Uai to get all apps (-a) currently installed (-i) on the connected USB device (-U):

$ frida-ps -Uai
 PID  Name                 Identifier
----  -------------------  -----------------------------------------
6847  Calendar             com.apple.mobilecal
6815  Mail                 com.apple.mobilemail
   -  App Store            com.apple.AppStore
   -  Apple Store          com.apple.store.Jolly
   -  Calculator           com.apple.calculator
   -  Camera               com.apple.camera
   -  iGoat-Swift          OWASP.iGoat-Swift

Basic Enumeration & Hooking

Learn how to enumerate the components of the application and how to easily hook methods and classes with objection:

{% content-ref url="ios-hooking-with-objection.md" %} ios-hooking-with-objection.md {% endcontent-ref %}

IPA Structure

.ipa files are zipped packages, so you can change the extension to .zip and decompress them. A complete packaged app ready to be installed is commonly referred to as a Bundle.
After decompressing them you should see <NAME>.app , a zipped archive that contains the rest of the resources.

  • Info.plist: A file that contains some of the application specific configurations.
  • _CodeSignature/ contains a plist file with a signature over all files in the bundle.
  • Assets.car: Another zipped archive that contains assets (icons).
  • Frameworks/ contains the app native libraries as .dylib or .framework files.
  • PlugIns/ may contain app extensions as .appex files (not present in the example).
  • Core Data: It is used to save your application’s permanent data for offline use, to cache temporary data, and to add undo functionality to your app on a single device. To sync data across multiple devices in a single iCloud account, Core Data automatically mirrors your schema to a CloudKit container.
  • PkgInfo: The PkgInfo file is an alternate way to specify the type and creator codes of your application or bundle.
  • en.lproj, fr.proj, Base.lproj: Are the language packs that contains resources for those specific languages, and a default resource in case a language isn' t supported.

There are multiple ways to define the UI in an iOS application: storyboard, nib or xib files.

Info.plist

The information property list or Info.plist is the main source of information for an iOS app. It consists of a structured file containing key-value pairs describing essential configuration information about the app. Actually, all bundled executables (app extensions, frameworks and apps) are expected to have an Info.plist file. You can find all possible keys in the Apple Developer Documentation.

The file might be formatted in XML or binary (bplist). You can convert it to XML format with one simple command:

  • On macOS with plutil, which is a tool that comes natively with macOS 10.2 and above versions (no official online documentation is currently available):

    $ plutil -convert xml1 Info.plist

  • On Linux:

    $ apt install libplist-utils
$ plistutil -i Info.plist -o Info_xml.plist

Here's a non-exhaustive list of some info and the corresponding keywords that you can easily search for in the Info.plist file by just inspecting the file or by using grep -i <keyword> Info.plist:

  • App permissions Purpose Strings: UsageDescription
  • Custom URL schemes: CFBundleURLTypes
  • Exported/imported custom document types: UTExportedTypeDeclarations / UTImportedTypeDeclarations
  • App Transport Security (ATS) configuration: NSAppTransportSecurity

Please refer to the mentioned chapters to learn more about how to test each of these points.

Data Paths

On iOS, system applications can be found in the /Applications directory while user-installed apps are available under /private/var/containers/. However, finding the right folder just by navigating the file system is not a trivial task as every app gets a random 128-bit UUID (Universal Unique Identifier) assigned for its directory names.

In order to easily obtain the installation directory information for user-installed apps you can use objection's command env will also show you all the directory information of the app:

OWASP.iGoat-Swift on (iPhone: 11.1.2) [usb] # env

Name               Path
-----------------  -------------------------------------------------------------------------------------------
BundlePath         /var/containers/Bundle/Application/3ADAF47D-A734-49FA-B274-FBCA66589E67/iGoat-Swift.app
CachesDirectory    /var/mobile/Containers/Data/Application/8C8E7EB0-BC9B-435B-8EF8-8F5560EB0693/Library/Caches
DocumentDirectory  /var/mobile/Containers/Data/Application/8C8E7EB0-BC9B-435B-8EF8-8F5560EB0693/Documents
LibraryDirectory   /var/mobile/Containers/Data/Application/8C8E7EB0-BC9B-435B-8EF8-8F5560EB0693/Library

As you can see, apps have two main locations:

  • The Bundle directory (/var/containers/Bundle/Application/3ADAF47D-A734-49FA-B274-FBCA66589E67/).
  • The Data directory (/var/mobile/Containers/Data/Application/8C8E7EB0-BC9B-435B-8EF8-8F5560EB0693/).

These folders contain information that must be examined closely during application security assessments (for example when analyzing the stored data for sensitive data).

Bundle directory:

  • AppName.app
    • This is the Application Bundle as seen before in the IPA, it contains essential application data, static content as well as the application's compiled binary.
    • This directory is visible to users, but users can't write to it.
    • Content in this directory is not backed up.
    • The contents of this folder are used to validate the code signature.

Data directory:

  • Documents/
    • Contains all the user-generated data. The application end user initiates the creation of this data.
    • Visible to users and users can write to it.
    • Content in this directory is backed up.
    • The app can disable paths by setting NSURLIsExcludedFromBackupKey.
  • Library/
    • Contains all files that aren't user-specific, such as caches, preferences, cookies, and property list (plist) configuration files.
    • iOS apps usually use the Application Support and Caches subdirectories, but the app can create custom subdirectories.
  • Library/Caches/
    • Contains semi-persistent cached files.
    • Invisible to users and users can't write to it.
    • Content in this directory is not backed up.
    • The OS may delete this directory's files automatically when the app is not running and storage space is running low.
  • Library/Application Support/
    • Contains persistent files necessary for running the app.
    • Invisible to users and users can't write to it.
    • Content in this directory is backed up.
    • The app can disable paths by setting NSURLIsExcludedFromBackupKey.
  • Library/Preferences/
    • Used for storing properties that can persist even after an application is restarted.
    • Information is saved, unencrypted, inside the application sandbox in a plist file called [BUNDLE_ID].plist.
    • All the key/value pairs stored using NSUserDefaults can be found in this file.
  • tmp/
    • Use this directory to write temporary files that do not need to persist between app launches.
    • Contains non-persistent cached files.
    • Invisible to users.
    • Content in this directory is not backed up.
    • The OS may delete this directory's files automatically when the app is not running and storage space is running low.

Let's take a closer look at iGoat-Swift's Application Bundle (.app) directory inside the Bundle directory (/var/containers/Bundle/Application/3ADAF47D-A734-49FA-B274-FBCA66589E67/iGoat-Swift.app):

OWASP.iGoat-Swift on (iPhone: 11.1.2) [usb] # ls
NSFileType      Perms  NSFileProtection    ...  Name
------------  -------  ------------------  ...  --------------------------------------
Regular           420  None                ...  rutger.html
Regular           420  None                ...  mansi.html
Regular           420  None                ...  splash.html
Regular           420  None                ...  about.html

Regular           420  None                ...  LICENSE.txt
Regular           420  None                ...  Sentinel.txt
Regular           420  None                ...  README.txt

Binary Reversing

Inside the <application-name>.app folder you will find a binary file called <application-name>. This is the file that will be executed. You can perform a basic inspection of the binary with the tool otool:

otool -Vh DVIA-v2 #Check some compilation attributes
      magic  cputype cpusubtype  caps    filetype ncmds sizeofcmds      flags
MH_MAGIC_64    ARM64        ALL  0x00     EXECUTE    65       7112   NOUNDEFS DYLDLINK TWOLEVEL WEAK_DEFINES BINDS_TO_WEAK PIE

otool -L DVIA-v2 #Get third party libraries
DVIA-v2:
    /usr/lib/libc++.1.dylib (compatibility version 1.0.0, current version 400.9.1)
    /usr/lib/libsqlite3.dylib (compatibility version 9.0.0, current version 274.6.0)
    /usr/lib/libz.1.dylib (compatibility version 1.0.0, current version 1.2.11)
    @rpath/Bolts.framework/Bolts (compatibility version 1.0.0, current version 1.0.0)
[...]

Check if the app is encrypted

See if there is any output for:

otool -l <app-binary> | grep -A 4 LC_ENCRYPTION_INFO

Disassembling the binary

Disassemble the text section:

otool -tV DVIA-v2
DVIA-v2:
(__TEXT,__text) section
+[DDLog initialize]:
0000000100004ab8    sub    sp, sp, #0x60
0000000100004abc    stp    x29, x30, [sp, #0x50]   ; Latency: 6
0000000100004ac0    add    x29, sp, #0x50
0000000100004ac4    sub    x8, x29, #0x10
0000000100004ac8    mov    x9, #0x0
0000000100004acc    adrp    x10, 1098 ; 0x10044e000
0000000100004ad0    add    x10, x10, #0x268

To print the Objective-C segment of the sample application one can use:

otool -oV DVIA-v2
DVIA-v2:
Contents of (__DATA,__objc_classlist) section
00000001003dd5b8 0x1004423d0 _OBJC_CLASS_$_DDLog
    isa        0x1004423a8 _OBJC_METACLASS_$_DDLog
    superclass 0x0 _OBJC_CLASS_$_NSObject
    cache      0x0 __objc_empty_cache
    vtable     0x0
    data       0x1003de748
        flags          0x80
        instanceStart  8

In order to obtain a more compact Objective-C code you can use class-dump:

class-dump some-app
//
//     Generated by class-dump 3.5 (64 bit).
//
//     class-dump is Copyright (C) 1997-1998, 2000-2001, 2004-2013 by Steve Nygard.
//

#pragma mark Named Structures

struct CGPoint {
    double _field1;
    double _field2;
};

struct CGRect {
    struct CGPoint _field1;
    struct CGSize _field2;
};

struct CGSize {
    double _field1;
    double _field2;
};

However, the best options to disassemble the binary are: Hopper and IDA.


Use Trickest to easily build and automate workflows powered by the world's most advanced community tools.
Get Access Today:

{% embed url="https://trickest.com/?utm_campaign=hacktrics&utm_medium=banner&utm_source=hacktricks" %}

Data Storage

To learn about how iOS stores data in the device read this page:

{% content-ref url="ios-basics.md" %} ios-basics.md {% endcontent-ref %}

{% hint style="warning" %} The following places to store information should be checked right after installing the application, after checking all the functionalities of the application and even after login out from one user and login into a different one.
The goal is to find unprotected sensitive information of the application (passwords, tokens), of the current user and of previously logged users. {% endhint %}

Plist

plist files are structured XML files that contains key-value pairs. It's a way to store persistent data, so sometimes you may find sensitive information in these files. It's recommended to check these files after installing the app and after using intensively it to see if new data is written.

The most common way to persist data in plist files is through the usage of NSUserDefaults. This plist file is saved inside the app sandbox in Library/Preferences/<appBundleID>.plist

The NSUserDefaults class provides a programmatic interface for interacting with the default system. The default system allows an application to customize its behaviour according to user preferences. Data saved by NSUserDefaults can be viewed in the application bundle. This class stores data in a plist file, but it's meant to be used with small amounts of data.

This data cannot be longer accessed directly via a trusted computer, but can be accessed performing a backup.

You can dump the information saved using NSUserDefaults using objection's ios nsuserdefaults get

To find all the plist of used by the application you can access to /private/var/mobile/Containers/Data/Application/{APPID} and run:

find ./ -name "*.plist"

The file might be formatted in XML or binary (bplist). You can convert it to XML format with one simple command:

  • On macOS with plutil, which is a tool that comes natively with macOS 10.2 and above versions (no official online documentation is currently available):

    $ plutil -convert xml1 Info.plist

  • On Linux:

    $ apt install libplist-utils
$ plistutil -i Info.plist -o Info_xml.plist

  • On an objection's session:

    ios plist cat /private/var/mobile/Containers/Data/Application/AF1F534B-1B8F-0825-ACB21-C0301AB7E56D/Library/Preferences/com.some.package.app.plist

Core Data

Core Data is a framework for managing the model layer of objects in your application. Core Data can use SQLite as its persistent store, but the framework itself is not a database.
CoreData does not encrypt it's data by default. However, an additional encryption layer can be added to CoreData. See the GitHub Repo for more details.

You can find the SQLite Core Data information of an application in the path /private/var/mobile/Containers/Data/Application/{APPID}/Library/Application Support

If you can open the SQLite and access sensitive information, then you found a miss-configuration.

{% code title="Code from iGoat" %}

-(void)storeDetails {
    AppDelegate * appDelegate = (AppDelegate *)(UIApplication.sharedApplication.delegate);

    NSManagedObjectContext *context =[appDelegate managedObjectContext];

    User *user = [self fetchUser];
    if (user) {
        return;
    }
    user = [NSEntityDescription insertNewObjectForEntityForName:@"User"
                                                  inManagedObjectContext:context];
    user.email = CoreDataEmail;
    user.password = CoreDataPassword;
    NSError *error;
    if (![context save:&error]) {
        NSLog(@"Error in saving data: %@", [error localizedDescription]);

    }else{
        NSLog(@"data stored in core data");
    }
}

{% endcode %}

YapDatabase

YapDatabase is a key/value store built on top of SQLite.
As the Yap databases are sqlite databases you can find them using the purposed commend in the previous section.

Other SQLite Databases

It's common for applications to create their own sqlite database. They may be storing sensitive data on them and leaving it unencrypted. Therefore, it's always interesting to check every database inside the applications directory. Therefore go to the application directory where the data is saved (/private/var/mobile/Containers/Data/Application/{APPID})

find ./ -name "*.sqlite" -or -name "*.db"

Firebase Real-Time Databases

It can be leveraged by application developers to store and sync data with a NoSQL cloud-hosted database. The data is stored as JSON and is synchronized in real-time to every connected client and also remains available even when the application goes offline.

You can find how to check for misconfigured Firebase databases here:

{% content-ref url="../../network-services-pentesting/pentesting-web/buckets/firebase-database.md" %} firebase-database.md {% endcontent-ref %}

Realm databases

Realm Objective-C and Realm Swift aren't supplied by Apple, but they are still worth noting. They store everything unencrypted, unless the configuration has encryption enabled.

You can find this databases in /private/var/mobile/Containers/Data/Application/{APPID}

iPhone:/private/var/mobile/Containers/Data/Application/A079DF84-726C-4AEA-A194-805B97B3684A/Documents root# ls
default.realm  default.realm.lock  default.realm.management/  default.realm.note|

$ find ./ -name "*.realm*"

You can use the tool Realm Studio to open this database files.

The following example demonstrates how to use encryption with a Realm database:

// Open the encrypted Realm file where getKey() is a method to obtain a key from the Keychain or a server
let config = Realm.Configuration(encryptionKey: getKey())
do {
  let realm = try Realm(configuration: config)
  // Use the Realm as normal
} catch let error as NSError {
  // If the encryption key is wrong, `error` will say that it's an invalid database
  fatalError("Error opening realm: \(error)")
}

Couchbase Lite Databases

Couchbase Lite is a lightweight, embedded, document-oriented (NoSQL) database engine that can be synced. It compiles natively for iOS and macOS.

Check for possible couchbase databases in /private/var/mobile/Containers/Data/Application/{APPID}/Library/Application Support/

Cookies

iOS store the cookies of the apps in the Library/Cookies/cookies.binarycookies inside each apps folder. However, developers sometimes decide to save them in the keychain as the mentioned cookie file can be accessed in backups.

To inspect the cookies file you can use this python script or use** objection's ios cookies get.
You can also use objection to convert these files to a JSON** format and inspect the data.

...itudehacks.DVIAswiftv2.develop on (iPhone: 13.2.3) [usb] # ios cookies get --json
[
    {
        "domain": "highaltitudehacks.com",
        "expiresDate": "2051-09-15 07:46:43 +0000",
        "isHTTPOnly": "false",
        "isSecure": "false",
        "name": "username",
        "path": "/",
        "value": "admin123",
        "version": "0"
    }
]

Cache

By default NSURLSession stores data, such as HTTP requests and responses in the Cache.db database. This database can contain sensitive data, if tokens, usernames or any other sensitive information has been cached. To find the cached information open the data directory of the app (/var/mobile/Containers/Data/Application/<UUID>) and go to /Library/Caches/<Bundle Identifier>. The WebKit cache is also being stored in the Cache.db file. Objection can open and interact with the database with the command sqlite connect Cache.db, as it is a normal SQLite database.

It is recommended to disable Caching this data, as it may contain sensitive information in the request or response. The following list below shows different ways of achieving this:

  1. It is recommended to remove Cached responses after logout. This can be done with the provided method by Apple called removeAllCachedResponses You can call this method as follows:

    URLCache.shared.removeAllCachedResponses()

    This method will remove all cached requests and responses from Cache.db file.

  2. If you don't need to use the advantage of cookies it would be recommended to just use the .ephemeral configuration property of URLSession, which will disable saving cookies and Caches.

    Apple documentation:

    An ephemeral session configuration object is similar to a default session configuration (see default), except that the corresponding session object doesn’t store caches, credential stores, or any session-related data to disk. Instead, session-related data is stored in RAM. The only time an ephemeral session writes data to disk is when you tell it to write the contents of a URL to a file.

  3. Cache can be also disabled by setting the Cache Policy to .notAllowed. It will disable storing Cache in any fashion, either in memory or on disk.

Snapshots

Whenever you press the home button, iOS takes a snapshot of the current screen to be able to do the transition to the application on a much smoother way. However, if sensitive data is present in the current screen, it will be saved in the image (which persists across reboots). These are the snapshots that you can also access double tapping the home screen to switch between apps.

Unless the iPhone is jailbroken, the attacker needs to have access to the device unblocked to see these screenshots. By default the last snapshot is stored in the application's sandbox in Library/Caches/Snapshots/ or Library/SplashBoard/Snapshots folder (the trusted computers can' t access the filesystem from iOX 7.0).

Once way to prevent this bad behaviour is to put a blank screen or remove the sensitive data before taking the snapshot using the ApplicationDidEnterBackground() function.

The following is a sample remediation method that will set a default screenshot.

Swift:

private var backgroundImage: UIImageView?

func applicationDidEnterBackground(_ application: UIApplication) {
    let myBanner = UIImageView(image: #imageLiteral(resourceName: "overlayImage"))
    myBanner.frame = UIScreen.main.bounds
    backgroundImage = myBanner
    window?.addSubview(myBanner)
}

func applicationWillEnterForeground(_ application: UIApplication) {
    backgroundImage?.removeFromSuperview()
}

Objective-C:

@property (UIImageView *)backgroundImage;

- (void)applicationDidEnterBackground:(UIApplication *)application {
    UIImageView *myBanner = [[UIImageView alloc] initWithImage:@"overlayImage.png"];
    self.backgroundImage = myBanner;
    self.backgroundImage.bounds = UIScreen.mainScreen.bounds;
    [self.window addSubview:myBanner];
}

- (void)applicationWillEnterForeground:(UIApplication *)application {
    [self.backgroundImage removeFromSuperview];
}

This sets the background image to overlayImage.png whenever the application is backgrounded. It prevents sensitive data leaks because overlayImage.png will always override the current view.

Keychain

Tools like Keychain-Dumper can be used to dump the keychain (the dive must be jailbroken).
You can also use ios keychain dump from Objection.

NSURLCredential

NSURLCredential is the perfect class to store username and password in the keychain. No need to bother with NSUserDefaults nor any keychain wrapper.
Once the user is logged in, you can** store** his username and password to the keychain:

NSURLCredential *credential;

credential = [NSURLCredential credentialWithUser:username password:password persistence:NSURLCredentialPersistencePermanent];
[[NSURLCredentialStorage sharedCredentialStorage] setCredential:credential forProtectionSpace:self.loginProtectionSpace];

You can use Objection's ios nsurlcredentialstorage dump to dump these secrets.

Custom Keyboards/Keyboard Cache

From iOS 8.0 Apple allows to install custom extensions for iOS like custom keyboards.
The installed keyboards can be managed via Settings > General > Keyboard > Keyboards
Custom keyboards can be used to sniff the keystrokes and send them to the attacker server. However, note that custom keyboards requiring networking connectivity will be notified to the user.
Also, the user can switch to a different (more trusted) keyboard for introducing the credentials.

Moreover, applications can prevent its users from using custom keyboards within the app (or at least for sensitive parts of the app).

{% hint style="warning" %} It's recommended to not allow third party keyboards if you consider the users won't need them {% endhint %}

Note that because of auto-correct and auto-suggestions, the default iOS keyboard will capture and store each non-standard word word in a cache file if the attribute securetTextEntry is not set to true or if autoCorrectionType is not set to UITextAutoCorrectionTypeNo.

By default the keyboards store this cache inside the applications sandbox in Library/Keyboard/{locale}-dynamic-text.dat file or in /private/var/mobile/Library/Keyboard/dynamic-text.dat. However, it might be saving the dateaelsewhere.
It's possible to reset the cache in Settings > General > Reset > Reset Keyboard Dictionary

{% hint style="info" %} Therefore, check always these files and search for possible sensitive information.
Intercepting the network traffic is another way to check if the custom keyboard is sending keystroked to a remote server. {% endhint %}

The UITextInputTraits protocol is used for keyboard caching. The UITextField, UITextView, and UISearchBar classes automatically support this protocol and it offers the following properties:

  • var autocorrectionType: UITextAutocorrectionType determines whether autocorrection is enabled during typing. When autocorrection is enabled, the text object tracks unknown words and suggests suitable replacements, replacing the typed text automatically unless the user overrides the replacement. The default value of this property is UITextAutocorrectionTypeDefault, which for most input methods enables autocorrection.
  • var secureTextEntry: BOOL determines whether text copying and text caching are disabled and hides the text being entered for UITextField. The default value of this property is NO.

To identify this behaviour in the code:

  • Search through the source code for similar implementations, such as
  textObject.autocorrectionType = UITextAutocorrectionTypeNo;
  textObject.secureTextEntry = YES;
  • Open xib and storyboard files in the Interface Builder of Xcode and verify the states of Secure Text Entry and Correction in the Attributes Inspector for the appropriate object.

The application must prevent the caching of sensitive information entered into text fields. You can prevent caching by disabling it programmatically, using the textObject.autocorrectionType = UITextAutocorrectionTypeNo directive in the desired UITextFields, UITextViews, and UISearchBars. For data that should be masked, such as PINs and passwords, set textObject.secureTextEntry to YES.

UITextField *textField = [ [ UITextField alloc ] initWithFrame: frame ];
textField.autocorrectionType = UITextAutocorrectionTypeNo;

Logs

The most common ways to debug code is using logging, and the application may print sensitive information inside the logs.
In iOS version 6 and below, logs were world readable (a malicious app could read logs from other apps and extract sensitive information from there). Nowadays, apps can only access their own logs.

However, an attacker with physical access to an unlocked device can connect it to a computer and read the logs (note that the logs written to disk by an app aren't removed if the app ins uninstalled).

It's recommended to navigate through all the screens of the app and interact with every UI element and functionality of and provide input text in all text fields and review the logs looking for sensitive information exposed.

Use the following keywords to check the app's source code for predefined and custom logging statements:

  • For predefined and built-in functions:
    • NSLog
    • NSAssert
    • NSCAssert
    • fprintf
  • For custom functions:
    • Logging
    • Logfile

Monitoring System Logs

Many apps log informative (and potentially sensitive) messages to the console log. The log also contains crash reports and other useful information.

You can use these tools:

idevice_id --list   # To find the device ID
idevicesyslog -u <id> (| grep <app>)   # To get the device logs

You can collect console logs through the Xcode Devices window as follows:

  1. Launch Xcode.
  2. Connect your device to your host computer.
  3. Choose Window -> Devices and Simulators.
  4. Click on your connected iOS device in the left section of the Devices window.
  5. Reproduce the problem.
  6. Click on the Open Console button located in the upper right-hand area of the Devices window to view the console logs on a separate window.

You can also connect to the device shell as explained in Accessing the Device Shell, install socat via apt-get and run the following command:

iPhone:~ root# socat - UNIX-CONNECT:/var/run/lockdown/syslog.sock

========================
ASL is here to serve you
> watch
OK

Jun  7 13:42:14 iPhone chmod[9705] <Notice>: MS:Notice: Injecting: (null) [chmod] (1556.00)
Jun  7 13:42:14 iPhone readlink[9706] <Notice>: MS:Notice: Injecting: (null) [readlink] (1556.00)
Jun  7 13:42:14 iPhone rm[9707] <Notice>: MS:Notice: Injecting: (null) [rm] (1556.00)
Jun  7 13:42:14 iPhone touch[9708] <Notice>: MS:Notice: Injecting: (null) [touch] (1556.00)
...


Use Trickest to easily build and automate workflows powered by the world's most advanced community tools.
Get Access Today:

{% embed url="https://trickest.com/?utm_campaign=hacktrics&utm_medium=banner&utm_source=hacktricks" %}

Backups

iOS includes auto-backup features that create copies of the data stored on the device. You can make iOS backups from your host computer by using iTunes (till macOS Catalina) or Finder (from macOS Catalina onwards), or via the iCloud backup feature. In both cases, the backup includes nearly all data stored on the iOS device except highly sensitive data such as Apple Pay information and Touch ID settings.

Since iOS backs up installed apps and their data, an obvious concern is whether sensitive user data stored by the app might unintentionally leak through the backup. Another concern, though less obvious, is whether sensitive configuration settings used to protect data or restrict app functionality could be tampered to change app behaviour after restoring a modified backup. Both concerns are valid and these vulnerabilities have proven to exist in a vast number of apps today.

A backup of a device on which a mobile application has been installed will include all subdirectories (except for Library/Caches/) and files in the app's private directory.
Therefore, avoid storing sensitive data in plaintext within any of the files or folders that are in the app's private directory or subdirectories.

Although all the files in Documents/ and Library/Application Support/ are always backed up by default, you can exclude files from the backup by calling NSURL setResourceValue:forKey:error: with the NSURLIsExcludedFromBackupKey key.
You can use the NSURLIsExcludedFromBackupKey and CFURLIsExcludedFromBackupKey file system properties to exclude files and directories from backups.

{% hint style="warning" %} Therefore when checking the backup of an application you should check if any sensitive information is accessible and if you can modify any sensitive behaviour of the application by modifying some setting of the backup and restoring the backup {% endhint %}

How to test

Start by creating a backup of the device (you can do it using Finder) and finding where is the backup stored. The official Apple documentation will help you to locate backups of your iPhone, iPad, and iPod touch.

Once you have found the backup of the device (/Users/carlos.martin/Library/Application Support/MobileSync/Backup/{deviceID}) you can start looking for sensitive information using grep for example, or using tools like iMazing).

To identify if a backup is encrypted, you can check the key named "IsEncrypted" from the file "Manifest.plist", located at the root of the backup directory. The following example shows a configuration indicating that the backup is encrypted:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
...
 <key>Date</key>
 <date>2021-03-12T17:43:33Z</date>
 <key>IsEncrypted</key>
 <true/>
...
</plist>

In case you need to work with an encrypted backup, there are some Python scripts in DinoSec's GitHub repo, such as backup_tool.py and backup_passwd.py, that will serve as a good starting point. However, note that they might not work with the latest iTunes/Finder versions and might need to be tweaked.

You can also use the tool iOSbackup to easily read and extract files from a password-encrypted iOS backup.

How to modify the behaviour

In the open source bitcoin wallet app, Bither, you'll see that it's possible to configure a PIN to lock the UI.
This is PIN is stored in the file net.bither.plist inside the pin_code key.
If you clear this key from that plist in the backup and restores the backup, you will be able to access the wallet.

Testing Memory for Sensitive Data

At some point sensitive information is going to be stored in memory. The objective is to make sure that this info is exposed as briefly as possible.

To investigate an application's memory, first create a memory dump. Alternatively, you can analyze the memory in real time with, for example, a debugger. Regardless of the method you use, this is a very error-prone process because dumps provide the data left by executed functions and you might miss executing critical steps. In addition, overlooking data during analysis is quite easy to do unless you know the footprint of the data you're looking for (either its exact value or its format). For example, if the app encrypts according to a randomly generated symmetric key, you're very unlikely to spot the key in memory unless you find its value by other means.

Retrieving and Analyzing a Memory Dump

Wether you are using a jailbroken or a non-jailbroken device, you can dump the app's process memory with objection and Fridump.

After the memory has been dumped (e.g. to a file called "memory"), depending on the nature of the data you're looking for, you'll need a set of different tools to process and analyze that memory dump. For instance, if you're focusing on strings, it might be sufficient for you to execute the command strings or rabin2 -zz to extract those strings.

# using strings
$ strings memory > strings.txt

# using rabin2
$ rabin2 -ZZ memory > strings.txt

Open strings.txt in your favorite editor and dig through it to identify sensitive information.

However if you'd like to inspect other kind of data, you'd rather want to use radare2 and its search capabilities. See radare2's help on the search command (/?) for more information and a list of options. The following shows only a subset of them:

$ r2 <name_of_your_dump_file>

[0x00000000]> /?
Usage: /[!bf] [arg]  Search stuff (see 'e??search' for options)
|Use io.va for searching in non virtual addressing spaces
| / foo\x00                    search for string 'foo\0'
| /c[ar]                       search for crypto materials
| /e /E.F/i                    match regular expression
| /i foo                       search for string 'foo' ignoring case
| /m[?][ebm] magicfile         search for magic, filesystems or binary headers
| /v[1248] value               look for an `cfg.bigendian` 32bit value
| /w foo                       search for wide string 'f\0o\0o\0'
| /x ff0033                    search for hex string
| /z min max                   search for strings of given size
...

Runtime Memory Analysis

By using r2frida you can analyze and inspect the app's memory while running and without needing to dump it. For example, you may run the previous search commands from r2frida and search the memory for a string, hexadecimal values, etc. When doing so, remember to prepend the search command (and any other r2frida specific commands) with a backslash \ after starting the session with r2 frida://usb//<name_of_your_app>.

Broken Cryptography

Poor Key Management Processes

Some developers save sensitive data in the local storage and encrypt it with a key hardcoded/predictable in the code. This shouldn't be done as some reversing could allow attackers to extract the confidential information.

Use of Insecure and/or Deprecated Algorithms

Developers shouldn't use deprecated algorithms to perform authorisation checks, store or send data. Some of these algorithms are: RC4, MD4, MD5, SHA1... If hashes are used to store passwords for example, hashes brute-force resistant should be used with salt.

Check

The main checks to perform if to find if you can find hardcoded passwords/secrets in the code, or if those are predictable, and if the code is using some king of weak cryptography algorithms.

It's interesting to know that you can monitor some crypto libraries automatically using objection with:

ios monitor crypt

For more information about iOS cryptographic APIs and libraries access https://mobile-security.gitbook.io/mobile-security-testing-guide/ios-testing-guide/0x06e-testing-cryptography

Local Authentication

The tester should be aware that local authentication should always be enforced at a remote endpoint or based on a cryptographic primitive. Attackers can easily bypass local authentication if no data returns from the authentication process.

The Local Authentication framework _**_provides a set of APIs for developers to extend an authentication dialog to a user. In the context of connecting to a remote service, it is possible (and recommended) to leverage the keychain for implementing local authentication.

The fingerprint ID sensor is operated by the SecureEnclave security coprocessor and does not expose fingerprint data to any other parts of the system. Next to Touch ID, Apple introduced Face ID: which allows authentication based on facial recognition.

Developers have two options for incorporating Touch ID/Face ID authentication:

  • LocalAuthentication.framework is a high-level API that can be used to authenticate the user via Touch ID. The app can't access any data associated with the enrolled fingerprint and is notified only whether authentication was successful.
  • Security.framework is a lower level API to access keychain services. This is a secure option if your app needs to protect some secret data with biometric authentication, since the access control is managed on a system-level and can not easily be bypassed. Security.framework has a C API, but there are several open source wrappers available, making access to the keychain as simple as to NSUserDefaults.

{% hint style="danger" %} Please be aware that using either the LocalAuthentication.framework or the Security.framework, will be a control that can be bypassed by an attacker as it does only return a boolean and no data to proceed with. See Don't touch me that way, by David Lindner et al for more details. {% endhint %}

Local Authentication Framework

Developers can display an authentication prompt by utilizing the function evaluatePolicy of the LAContext class. Two available policies define acceptable forms of authentication:

  • deviceOwnerAuthentication(Swift) or LAPolicyDeviceOwnerAuthentication(Objective-C): When available, the user is prompted to perform Touch ID authentication. If Touch ID is not activated, the device passcode is requested instead. If the device passcode is not enabled, policy evaluation fails.
  • deviceOwnerAuthenticationWithBiometrics (Swift) or LAPolicyDeviceOwnerAuthenticationWithBiometrics(Objective-C): Authentication is restricted to biometrics where the user is prompted for Touch ID.

The evaluatePolicy function returns a boolean value indicating whether the user has authenticated successfully. Which means that it can be easily bypassed (see below)

Local Authentication using Keychain

The iOS keychain APIs can (and should) be used to implement local authentication. During this process, the app stores either a secret authentication token or another piece of secret data identifying the user in the keychain. In order to authenticate to a remote service, the user must unlock the keychain using their passphrase or fingerprint to obtain the secret data.

The keychain allows saving items with the special SecAccessControl attribute, which will allow access to the item from the keychain only after the user has passed Touch ID authentication (or passcode, if such a fallback is allowed by attribute parameters).

In the following example we will save the string "test_strong_password" to the keychain. The string can be accessed only on the current device while the passcode is set (kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly parameter) and after Touch ID authentication for the currently enrolled fingers only (SecAccessControlCreateFlags.biometryCurrentSet parameter):

{% tabs %} {% tab title="Swift" %}

// 1. create AccessControl object that will represent authentication settings

var error: Unmanaged<CFError>?

guard let accessControl = SecAccessControlCreateWithFlags(kCFAllocatorDefault,
                                                          kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly,
                                                          SecAccessControlCreateFlags.biometryCurrentSet,
                                                          &error) else {
    // failed to create AccessControl object

    return
}

// 2. define keychain services query. Pay attention that kSecAttrAccessControl is mutually exclusive with kSecAttrAccessible attribute

var query: [String: Any] = [:]

query[kSecClass as String] = kSecClassGenericPassword
query[kSecAttrLabel as String] = "com.me.myapp.password" as CFString
query[kSecAttrAccount as String] = "OWASP Account" as CFString
query[kSecValueData as String] = "test_strong_password".data(using: .utf8)! as CFData
query[kSecAttrAccessControl as String] = accessControl

// 3. save item

let status = SecItemAdd(query as CFDictionary, nil)

if status == noErr {
    // successfully saved
} else {
    // error while saving
}

{% endtab %}

{% tab title="Objective-C" %}

    // 1. create AccessControl object that will represent authentication settings
    CFErrorRef *err = nil;

    SecAccessControlRef sacRef = SecAccessControlCreateWithFlags(kCFAllocatorDefault,
        kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly,
        kSecAccessControlUserPresence,
        err);

    // 2. define keychain services query. Pay attention that kSecAttrAccessControl is mutually exclusive with kSecAttrAccessible attribute
    NSDictionary* query = @{
        (_ _bridge id)kSecClass: (__bridge id)kSecClassGenericPassword,
        (__bridge id)kSecAttrLabel: @"com.me.myapp.password",
        (__bridge id)kSecAttrAccount: @"OWASP Account",
        (__bridge id)kSecValueData: [@"test_strong_password" dataUsingEncoding:NSUTF8StringEncoding],
        (__bridge id)kSecAttrAccessControl: (__bridge_transfer id)sacRef
    };

    // 3. save item
    OSStatus status = SecItemAdd((__bridge CFDictionaryRef)query, nil);

    if (status == noErr) {
        // successfully saved
    } else {
        // error while saving
    }

{% endtab %} {% endtabs %}

Now we can request the saved item from the keychain. Keychain services will present the authentication dialog to the user and return data or nil depending on whether a suitable fingerprint was provided or not.

{% tabs %} {% tab title="Swift" %}

// 1. define query
var query = [String: Any]()
query[kSecClass as String] = kSecClassGenericPassword
query[kSecReturnData as String] = kCFBooleanTrue
query[kSecAttrAccount as String] = "My Name" as CFString
query[kSecAttrLabel as String] = "com.me.myapp.password" as CFString
query[kSecUseOperationPrompt as String] = "Please, pass authorisation to enter this area" as CFString

// 2. get item
var queryResult: AnyObject?
let status = withUnsafeMutablePointer(to: &queryResult) {
    SecItemCopyMatching(query as CFDictionary, UnsafeMutablePointer($0))
}

if status == noErr {
    let password = String(data: queryResult as! Data, encoding: .utf8)!
    // successfully received password
} else {
    // authorization not passed
}

{% endtab %}

{% tab title="Objective-C" %}

// 1. define query
NSDictionary *query = @{(__bridge id)kSecClass: (__bridge id)kSecClassGenericPassword,
    (__bridge id)kSecReturnData: @YES,
    (__bridge id)kSecAttrAccount: @"My Name1",
    (__bridge id)kSecAttrLabel: @"com.me.myapp.password",
    (__bridge id)kSecUseOperationPrompt: @"Please, pass authorisation to enter this area" };

// 2. get item
CFTypeRef queryResult = NULL;
OSStatus status = SecItemCopyMatching((__bridge CFDictionaryRef)query, &queryResult);

if (status == noErr){
    NSData* resultData = ( __bridge_transfer NSData* )queryResult;
    NSString* password = [[NSString alloc] initWithData:resultData encoding:NSUTF8StringEncoding];
    NSLog(@"%@", password);
} else {
    NSLog(@"Something went wrong");
}

{% endtab %} {% endtabs %}

Detection

Usage of frameworks in an app can also be detected by analyzing the app binary's list of shared dynamic libraries. This can be done by using otool:

$ otool -L <AppName>.app/<AppName>

If LocalAuthentication.framework is used in an app, the output will contain both of the following lines (remember that LocalAuthentication.framework uses Security.framework under the hood):

/System/Library/Frameworks/LocalAuthentication.framework/LocalAuthentication
/System/Library/Frameworks/Security.framework/Security

If Security.framework is used, only the second one will be shown.

Local Authentication Framework Bypass

Objection

****Objection Biometrics Bypass **** can be used to bypass LocalAuthentication. Objection uses Frida to instrument the evaluatePolicy function so that it returns True even if authentication was not successfully performed. Use the ios ui biometrics_bypass command to bypass the insecure biometric authentication. Objection will register a job, which will replace the evaluatePolicy result. It will work in both, Swift and Objective-C implementations.

...itudehacks.DVIAswiftv2.develop on (iPhone: 13.2.3) [usb] # ios ui biometrics_bypass
(agent) Registering job 3mhtws9x47q. Type: ios-biometrics-disable
...itudehacks.DVIAswiftv2.develop on (iPhone: 13.2.3) [usb] # (agent) [3mhtws9x47q] Localized Reason for auth requirement: Please authenticate yourself
(agent) [3mhtws9x47q] OS authentication response: false
(agent) [3mhtws9x47q] Marking OS response as True instead
(agent) [3mhtws9x47q] Biometrics bypass hook complete

If vulnerable, the module will automatically bypass the login form.

Frida

An example of a use of evaluatePolicy from DVIA-v2 application:

+(void)authenticateWithTouchID {
    LAContext *myContext = [[LAContext alloc] init];
    NSError *authError = nil;
    NSString *myLocalizedReasonString = @"Please authenticate yourself";
     
    if ([myContext canEvaluatePolicy:LAPolicyDeviceOwnerAuthenticationWithBiometrics error:&authError]) {
        [myContext evaluatePolicy:LAPolicyDeviceOwnerAuthenticationWithBiometrics
                  localizedReason:myLocalizedReasonString
                            reply:^(BOOL success, NSError *error) {
                                if (success) {
                                    dispatch_async(dispatch_get_main_queue(), ^{
                                    [TouchIDAuthentication showAlert:@"Authentication Successful" withTitle:@"Success"];
                                    });
                                } else {
                                    dispatch_async(dispatch_get_main_queue(), ^{
                                       [TouchIDAuthentication showAlert:@"Authentication Failed !" withTitle:@"Error"];
                                    });
                                }
                            }];
    } else {
        dispatch_async(dispatch_get_main_queue(), ^{
            [TouchIDAuthentication showAlert:@"Your device doesn't support Touch ID or you haven't configured Touch ID authentication on your device" withTitle:@"Error"];
        });
    }
}

To bypass the Local Authentication, we have to write a Frida script that bypasses the aforementioned evaluatePolicy _ check. As you can see in the above-pasted code snippet, the evaluatePolicy uses a callback that determines the result. So, the easiest way to achieve the hack is to intercept that callback and make sure it **always returns the **success=1_.

// from https://securitycafe.ro/2022/09/05/mobile-pentesting-101-bypassing-biometric-authentication/
if(ObjC.available) {
    console.log("Injecting...");
    var hook = ObjC.classes.LAContext["- evaluatePolicy:localizedReason:reply:"];
    Interceptor.attach(hook.implementation, {
        onEnter: function(args) {
            var block = new ObjC.Block(args[4]);
            const callback = block.implementation;
            block.implementation = function (error, value)  {
 
                console.log("Changing the result value to true")
                const result = callback(1, null);
                return result;
            };
        },
    });
} else {
    console.log("Objective-C Runtime is not available!");
}
frida -U -f com.highaltitudehacks.DVIAswiftv2 --no-pause -l fingerprint-bypass-ios.js

Sensitive Functionality Exposure Through IPC

Custom URI Handlers / Deeplinks / Custom Schemes

{% content-ref url="ios-custom-uri-handlers-deeplinks-custom-schemes.md" %} ios-custom-uri-handlers-deeplinks-custom-schemes.md {% endcontent-ref %}

Universal Links

{% content-ref url="ios-universal-links.md" %} ios-universal-links.md {% endcontent-ref %}

UIActivity Sharing

{% content-ref url="ios-uiactivity-sharing.md" %} ios-uiactivity-sharing.md {% endcontent-ref %}

UIPasteboard

{% content-ref url="ios-uipasteboard.md" %} ios-uipasteboard.md {% endcontent-ref %}

App Extensions

{% content-ref url="ios-app-extensions.md" %} ios-app-extensions.md {% endcontent-ref %}

WebViews

{% content-ref url="ios-webviews.md" %} ios-webviews.md {% endcontent-ref %}

Serialisation and Encoding

{% content-ref url="ios-serialisation-and-encoding.md" %} ios-serialisation-and-encoding.md {% endcontent-ref %}

Network Communication

It's important to check that no communication is occurring without encryption and also that the application is correctly validating the TLS certificate of the server.
To check these kind of issues you can use a proxy like Burp:

{% content-ref url="burp-configuration-for-ios.md" %} burp-configuration-for-ios.md {% endcontent-ref %}

Hostname check

One common issue validating the TLS certificate is to check that the certificate was signed by a trusted CA, but not check if the hostname of the certificate is the hostname being accessed.
In order to check this issue using Burp, after trusting Burp CA in the iPhone, you can create a new certificate with Burp for a different hostname and use it. If the application still works, then, something it's vulnerable.

Certificate Pinning

If an application is correctly using SSL Pinning, then the application will only works if the certificate is the once expected to be. When testing an application this might be a problem as Burp will serve it's own certificate.
In order to bypass this protection inside a jailbroken device, you can install the application SSL Kill Switch or install [Burp Mobile Assistant_*](_https://portswigger.net/burp/documentation/desktop/tools/mobile-assistant/installing)\*

You can also use objection's ios sslpinning disable

Misc

  • In /System/Library you can find the frameworks installed in the phone used by system applications
  • The applications installed by the user from the App Store are located inside /User/Applications
  • And the /User/Library contains data saved by the user level applications
  • You can access /User/Library/Notes/notes.sqlite to read the notes saved inside the application.
  • Inside the folder of an installed application (/User/Applications/<APP ID>/) you can find some interesting files:
    • iTunesArtwork: The icon used by the app
    • iTunesMetadata.plist: Info of the app used in the App Store
    • /Library/*: Contains the preferences and cache. In /Library/Cache/Snapshots/* you can find the snapshot performed to the application before sending it to the background.

Hot Patching/Enforced Updateing

The developers can remotely patch all installations of their app instantly without having to resubmit the application to the App store and wait until it's approved.
For this purpose it's usually use JSPatch. But there are other options also such as Siren and react-native-appstore-version-checker.
This is a dangerous mechanism that could be abused by malicious third party SDKs therefore it's recommended to check which method is used to automatic updating (if any) and test it. You could try to download a previous version of the app for this purpose.

Third Parties

One problem of 3rd party SDKs is that there is no granular control over the features offered by the SDK. You could sue the SDK and have all features (including diagnostic leaks and insecure HTTP connections), or not use it. Also, usually it's no possible for the applications developers to patch a vulnerability on the SDK.
Moreover some SDKs start containing malware once they are very trusted by the community.

Besides, the features these services provide can involve tracking services to monitor the user's behaviour while using the app, selling banner advertisements, or improving the user experience. The downside to third-party services is that developers don't know the details of the code executed via third-party libraries. Consequently, no more information than is necessary should be sent to a service, and no sensitive information should be disclosed.

The downside is that a developer doesn’t know in detail what code is executed via 3rd party libraries and therefore giving up visibility. Consequently it should be ensured that not more than the information needed is sent to the service and that no sensitive information is disclosed.

Most third-party services are implemented in two ways:

  • with a standalone library
  • with a full SDK

All data that's sent to third-party services should be anonymized to prevent exposure of PII (Personal Identifiable Information) that would allow the third party to identify the user account.

You can find the libraries used by an application by running otool against the app (and running it against each shared library to find more shared libraries used).

References

More Information


Use Trickest to easily build and automate workflows powered by the world's most advanced community tools.
Get Access Today:

{% embed url="https://trickest.com/?utm_campaign=hacktrics&utm_medium=banner&utm_source=hacktricks" %}

☁️ HackTricks Cloud ☁️ -🐦 Twitter 🐦 - 🎙️ Twitch 🎙️ - 🎥 Youtube 🎥