GalapagosAlosAT133.template

# vim: set filetype=cfg:
################### Job Submission Setting #################
walltimeSLC         = 5:00
walltimeCoregist    = 3:00
walltimeProcessFilt = 15:00
walltimeProcessDone = 8:00
memorySLC           = 12000
memoryCoregist      = 15000               # change this for more frames
memoryProcessFilt   = 12000
memoryProcessDone   = 8000

########### Data Download and Focusing #####################
track               = 133
startFrame          = 7160
endFrame            = 7180
startDate           = 070115
endDate             = 110313
masterDate          = 100610
raw2slc_OrbitType   = HDR
ssaraopt            =  --platform=Alos -r 133 -f 7160,7170,7180 --beamMode FBS,FBD -s 2007-01-01

########### Select Pairs / Network #########################
select.network.method              = all
select.network.perpBaseMax         = 1800
select.network.lengthDayMax        = 1800
select.network.lengthDayMin        = 0
select.network.seasonal            = yes
select.network.dopOverlapThresh    = 15


############### 2 Pass InSAR - ROI_PAC #####################
DEM                = $SC/GalapagosT133F7160_7180AlosA/DEM/srtm1.dem
DEMg               = $SC/GalapagosT133F7160_7180AlosA/DEM/srtm1_60m.dem
flattening         = orbit
OrbitType          = HDR
Rlooks_sim         = 2
Rlooks_int         = 8
Rlooks_unw         = 8
unw_method         = snaphu
snap_conncomthresh = 60
Filt_method        = psfilt_adapt_filt
FilterStrength     = 0.5/4
UnwrappedThreshold = 0.10
maskingwith0height = TRUE
ampmagFineopt      = 120/120/256/64
meter_per_cycle    = 6.283
pixel_ratio        = 2
cleanopt           = 1




################ Time Series - MintPy ######################
mintpy.load.processor      = roipac  #[isce,roipac,gamma,], auto for isce
mintpy.load.updateMode     = auto  #[yes / no], auto for yes, skip re-loading if HDF5 files are complete
mintpy.load.compression    = auto  #[gzip / lzf / no], auto for no [recommended].
##---------interferogram datasets:
mintpy.load.unwFile        = $GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/interferograms/*/filt*.unw
mintpy.load.corFile        = $GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/interferograms/*/filt*.cor
mintpy.load.connCompFile   = $GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/interferograms/*/filt*snap_connect.byt
mintpy.load.intFile        = None #$GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/interferograms/*/filt*rlks.int
##---------geometry datasets:
mintpy.load.demFile        = $GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/geom_master/radar_*rlks.hgt
mintpy.load.lookupYFile    = $GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/geom_master/geomap_*rlks.trans
mintpy.load.lookupXFile    = $GALAPAGOS_DIR/GalapagosAlosAT133/ROIPAC/geom_master/geomap_*rlks.trans
##---------extra metadata to be loaded (to adjust for the bias in ROIPAC lookup table)
SUBSET_XMIN = 1
SUBSET_YMIN = 15

mintpy.subset.yx                         = 800:3700,0:1400
mintpy.reference.lalo                    = -0.71, -91.31     #-0.31, -91.22
mintpy.unwrapError.method                = bridging
mintpy.unwrapError.waterMaskFile         = waterMask.h5
mintpy.unwrapError.ramp                  = linear
mintpy.network.coherenceBased            = yes
mintpy.network.aoiLALO                   = -0.84:-0.81,-91.16:-91.12
mintpy.topographicResidual.stepFuncDate  = 20080529, 20090420, 20100519    #Cerro Azul, Fernandina, Alcedo,
mintpy.deramp                            = linear