Mega Issue: Models to Create

[seveibar]

• SOD-123 #25
  Here's the list with all items unchecked:

• soic8_w5.3mm_p1.27mm: SOIC with 8 pins, 5.3mm width, and 1.27mm pitch. #41

• qfn16_w4_h4_p0.65mm: QFN with 16 pins, 4mm width, 4mm height, and 0.65mm pitch.

• tssop20_w6.5mm_p0.65mm: TSSOP with 20 pins, 6.5mm width, and 0.65mm pitch. #30

• sot23_w3_h1.5_p0.95mm: SOT-23 with 3 pins, 1.5mm width, 3mm height, and 0.95mm pitch.

• bga64_w10_h10_grid8x8_p1.27mm: BGA with 64 pins, 10mm width, 10mm height, 8x8 ball grid, and 1.27mm pitch. #36

• qfp48_w7_h7_p0.5mm: QFP with 48 pins, 7mm width, 7mm height, and 0.5mm pitch.

• dfn8_w2_h3_p0.5mm: DFN with 8 pins, 2mm width, 3mm height, and 0.5mm pitch.

• soic16_w9.9_h3.9_p1.27mm: SOIC with 16 pins, 9.9mm width, 3.9mm height, and 1.27mm pitch. #42

• bga100_w12_h12_grid10x10_p1.0mm: BGA with 100 pins, 12mm width, 12mm height, 10x10 ball grid, and 1.0mm pitch. #37

• qfp80_w14_h14_p0.65mm: QFP with 80 pins, 14mm width, 14mm height, and 0.65mm pitch. #39

• mlp16_w4_h4_p0.5mm: MLP with 16 pins, 4mm width, 4mm height, and 0.5mm pitch.

• SOT23

• SOT723 #29

• SOT563 #27

[homie-gg]

Here are some pull requests that might be helpful reference for this task:

• Add SOT23 footprint and initial test

[homie-gg]

This might have already been done via: fix QFN to not be on side, fix footprints to render properly.