Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Code is not running after programming in Ubuntu 20.04 #2

Open
danish-anwar-butt opened this issue Sep 11, 2021 · 2 comments
Open

Code is not running after programming in Ubuntu 20.04 #2

danish-anwar-butt opened this issue Sep 11, 2021 · 2 comments

Comments

@danish-anwar-butt
Copy link

Hi,
Thanks for sharing such an awesome tool.
I'm using your tool with the same hardware as shown in your figure with a change in RST -> RTS pin. The tool works fine on my windows 7 machine. When I try to upload blinky.txt in my Ubuntu 20.04 environment the program is written but the led is not blinking after upload. I'm using windows and Ubuntu as dual-boot on the same machine. I'm attaching a screenshot of the command run:
Screenshot from 2021-09-11 16-42-28

Regards,
Danish
@lorforlinux
Copy link
Member

Hey @danish-anwar-butt, that is odd as you are successfully uploading the firmware to the chip.
Please try manually resetting the chip after uploading the firmware and let me know if the LED blinks.

@danish-anwar-butt
Copy link
Author

Hi,
Thanks for your fast reply.
Yes, I reset the device manually by unplugging and plugging again the USB port. But no success :(

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@lorforlinux @danish-anwar-butt