Skip to content

Latest commit

 

History

History
81 lines (67 loc) · 4.14 KB

README-query.md

File metadata and controls

81 lines (67 loc) · 4.14 KB
Raw

Query parameters

  • The query parameters are appended to the URL you would normally use for tar1090.

  • Before the first query parameter a question mark ? is prepended, for each additional parameter an ampersand & is prepended.

  • Example: http://192.168.x.yy/tar1090/?icao=456789&enableLabels&extendedLabels=2&trackLabels&zoom=11&mapDim=0.4

  • Some parameters need a value. If no value if passed, the default one is used.

  • Some parameters do not take a value. They are active if used in the URL.(hideSideBar, hideButtons, ...).

  • Query parameters in tar1090 are not case sensitive.

Search / filter

  • icao=icao - selects and isolates the selected plane(s). Separate multiple with commas.
  • noIsolation - show other planes and not only the ones selected by ?icao
  • icaoFilter=hex1,hex2,hex3 - Only show the mentioned hex IDs, no other aircraft will ever be displayed
  • reg=registration - Direct link to specific aircraft registration(s). Separate multiple with commas. ?icao is preferred as this option takes longer to load.
  • filterAltMin=500 - filter minimum altitute to 500 ft
  • filterAltMax=5000 - filter maximum altitute to 5000 ft
  • filterCallSign=^(UAL|DAL) - filter callsign to United or Deleta
  • filterType=B738 - filter to aircraft type code B738 aka 737-800
  • filterDescription=L2J - filter aircraft by type description
  • filterIcao=^a - filter icao that start with a
  • filterSources=adsb,uat,adsr,mlat,tisb,modeS - filter palnes by source type.
  • filterDbFlag=military,pia,ladd - filter planes by the db flags.

See the main readme for more exapmles on how to use the filters

Troubleshooting

  • reset - reset page settings
  • showerrors - show errors on screen

Rendering parameters

  • zoom=1-20 - set zoom level.
  • enableLabels - enable labels on aircraft ("L" button).
  • extendedLabels=value - select the labels type ("O" button) / Valid values are 0,1,2.
  • trackLabels - enable track labels ("K" button).
  • noVanish - persistence mode ("P" button).
  • scale=0.1-x - overall interface scaling.
  • iconScale=0.1-x - scale the aircraft icons. (multiplies with ?scale)
  • labelScale=0.1-x - scale the aircraft labels. (multiplies with ?scale)
  • tempTrails=value - shows temporary trails for ## seconds of history.
  • mapDim=0.1-1.0 - reduce map brightness (negative values increase brightness)
  • mapContrast=0.1-1.0 - increase the map contrast (negative values decrease brightness)
  • filterMaxRange=value - maximum distance of rendered tracks.
  • baseMap=maptype - change the map type (as defined in config.js).
  • mapOrientation=0-360 - normally true north faces up, use this to change which true direction is pointing up.
  • monochromeMarkers=xxxxxx - set constant html color for markers (parameter is an hexadecimal color).
  • monochromeTracks=xxxxxx - set constant html color for tracks (parameter is an hexadecimal color).
  • outlineWidth=value - set width for the for aircraft icons (only works with webGL disabled)
  • outlineColor=xxxxxx - set outline color (parameter is an hexadecimal color, only works with webGL disabled)
  • sidebarWidth=xxx - size of sidebar in pixels.
  • hideSideBar - hides sidebar.
  • hideButtons - hides all buttons.
  • centerReceiver - conter the view on receiver position.
  • nowebgl - force rendering without WebGL.
  • tableInView - button V / only show aircraft in view in the table

Toggles

  • mil - Military/Interesting.
  • tempTrails - enable temporary aircraft trails / tracks.
  • mobile - Force mobile view.
  • desktop - force desktop view.
  • kiosk - force kiosk mode (tempTrails=true / hideButtons=true / userScale=2).
  • allTracks - enable tracks as if pressing T

heatmap / reaplay (only available with readsb --heatmap parameter)

  • replay - replay history of all planes

  • heatmap - show a heatmap for the last 24h by default (optional: supply the maximum number of dots drawn, default 32000)

  • heatDuration - how many hours to show in the heatmap

  • heatEnd - how many hours to shift the heatmap time window into the past

  • heatAlpha - 0.1 to 1.0 - how transparent the dots will be

  • heatRadius - dot size for heatmap

  • heatManualRedraw - only redraw dots when pressing r

  • realHeat - real heatmap instead of dots

  • heatBlur - parameter for realHeat

  • heatWeight - parameter for realHeat