-
Notifications
You must be signed in to change notification settings - Fork 637
Hardware Itead Sonoff POW
Xose Pérez edited this page Mar 12, 2018
·
5 revisions
Property | Value |
---|---|
Manufacturer | Itead Studio |
Product page | https://www.itead.cc/sonoff-pow.html |
Wiki page | https://www.itead.cc/wiki/Sonoff |
Build flag | ITEAD_SONOFF_POW |
Voltage | 3v3 |
TODO
The unpopulated header in the Sonoff has all the required pins. My board has a 4 pins header. They are (from the top down) 3V3, RX, TX, GND
The original Sonoff has some connectivity issues. This is probably due to the antenna placement close to live lines. It works fine if it's near the AP, otherwise, it's often reported to lose connectivity.
If you're looking for support:
- Issues: this is the most dynamic channel at the moment, you might find an answer to your question by searching open or closed issues.
- Wiki pages: might not be as up-to-date as we all would like (hey, you can also contribute in the documentation!).
- Gitter channel: you have better chances to get fast answers from project contributors or other ESPurna users. (also available with any Matrix client!)
- Issue a question: as a last resort, you can open new question issue on GitHub. Just remember: the more info you provide the more chances you'll have to get an accurate answer.
- Backup the stock firmware
- Flash a pre-built binary image
- Flash a virgin Itead Sonoff device without opening
- Flash TUYA-based device without opening
- Flash Shelly device without opening
- Using PlatformIO
- from Visual Studio Code
- Using Arduino IDE
- Build the Web Interface
- Over-the-air updates
- Two-step updates
- ESPurna OTA Manager
- NoFUSS
- Troubleshooting
- MQTT
- REST API
- Domoticz
- Home Assistant
- InfluxDB
- Prometheus metrics
- Thingspeak
- Alexa
- Google Home
- Architecture
- 3rd Party Plugins
- Coding style
- Pull Requests