Skip to content

Latest commit

 

History

History
41 lines (32 loc) · 1.29 KB

README.md

File metadata and controls

41 lines (32 loc) · 1.29 KB
Raw

ATerm

This project, ATerm, is a simple serial terminal implemented in Python and Qt.
ATerm not only can send/receive ascii text but also send file(binary).

Looking for the C++ version ATerm

For C++ version, click here

Requirement

  • python==3.6
  • pyserial==3.4
  • PySide2==5.13.2
  • PyYAML==5.2

Setting

This section will talk about how to config ATerm(e.g., priority of ports, default baud rate, etc.) through writing the setting file. The setting file is a YAML file and place in the directory of program. There are following options in file.

  • priority: a list of string. ATerm will compare available com ports with this list and select the highest priority and available port on refresh bottom clicked.
  • baud: the key/value pairs. Key is the port name. Value is the baud rate.
  • path: a string. Default directory of open file dialog of sending file.
  • custom_baud: a list of integer. ATerm will add this list into the baud rate combo box.(1.3.0+)

Example

---
baud:
  ch340: 9600
  cp210: 115200

path: D:/terminal/

custom_baud:
- 15151

priority:
- cp210
- ch340

note: The name in baud and priority don't need identical to the name in ports combo box.