docker-ci

PowerShell Core module to build and test Docker images. The module comes with CmdLets to perform the most commonly used tasks with regards to building docker images:

Build
Tests
Lint
Login
Pull
Push
Tag
Inspect (not implemented yet)

For each tasks there is a corresponding CmdLet:

Invoke-DockerBuild
Invoke-DockerTests
Invoke-DockerLint
Invoke-DockerLogin
Invoke-DockerPull
Invoke-DockerPush
Invoke-DockerTag

To run, just do

PS C:\docker> Invoke-DockerBuild .

and so on.

Prerequisite

PowerShell core >= 6.0 is needed.
Docker Engine >= 20.10.0 or Docker Desktop >= 3.0.0 is needed

Installation

PS C:\docker> Install-Module Docker-ci -Repository PSGallery

Examples

In the following section we'll cover how to use the module to add testing and linting to an existing Dockerfile. I am assuming you repository looks like this at the moment:

PS C:\docker> Get-Content .\Dockerfile
FROM ubuntu:18.04

SHELL ["/bin/bash", "-o", "pipefail", "-c"]

RUN apt-get update \
    && apt-get install -y --no-install-recommends curl=7.* ca-certificates=* \
    && apt-get clean \
    && rm -rf /var/lib/apt/lists/*

RUN update-ca-certificates

RUN curl -sL https://get.docker.com/ | sh

RUN curl -LO https://storage.googleapis.com/container-structure-test/v1.8.0/container-structure-test-linux-amd64 \
    && chmod +x container-structure-test-linux-amd64 \
    && mv container-structure-test-linux-amd64 /usr/local/bin/container-structure-test

VOLUME /configs

ENTRYPOINT [ "/usr/local/bin/container-structure-test" ]

Listing 1: Example Dockerfile

Building an image from Dockerfile

To build an image based on a Dockerfile, use the Invoke-DockerBuild CmdLet, like so:

PS C:\docker> Invoke-DockerBuild . -ImageName structure
Sending build context to Docker daemon  4.608kB

Step 1/8 : FROM ubuntu:18.04
 ---> 775349758637
Step 2/8 : SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 ---> Using cache
 ---> b3d8c49615a7
Step 3/8 : RUN apt-get update     && apt-get install -y --no-install-recommends curl=7.* ca-certificates=*     && apt-get clean     && rm -rf /var/lib/apt/lists/*
 ---> Using cache
 ---> 9470f9c9ecea
Step 4/8 : RUN update-ca-certificates
 ---> Using cache
 ---> 80853c222946
Step 5/8 : RUN curl -sL https://get.docker.com/ | sh
 ---> Using cache
 ---> af17b9b8fb1b
Step 6/8 : RUN curl -LO https://storage.googleapis.com/container-structure-test/v1.8.0/container-structure-test-linux-amd64     && chmod +x container-structure-test-linux-amd64     && mv container-structure-test-linux-amd64 /usr/local/bin/container-structure-test
 ---> Using cache
 ---> bea1dca8e10e
Step 7/8 : VOLUME /configs
 ---> Using cache
 ---> 97e90bf8481b
Step 8/8 : ENTRYPOINT [ "/usr/local/bin/container-structure-test" ]
 ---> Using cache
 ---> 6b9746ab76d8
Successfully built 6b9746ab76d8
Successfully tagged structure:latest
SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.

Dockerfile    : Dockerfile
ImageName     : structure
Registry      :
Tag           : latest
CommandResult : CommandResult

Listing 2: Output from building a docker image

In this scenario, you will see the both the output from Docker and the result of the execution which is a PSCustomObject that holds:

The path to the Dockerfile being used as the basis for the image.
The name of the image being produced.
The registry (if unset defaults to Docker's default registry)
The command result object which has more detailed information about the execution.

In most cases you will want to store the result in a variable for further processing or output to a CI/CD pipeline, like so:

PS C:\docker> Invoke-DockerBuild . -ImageName structure
Sending build context to Docker daemon  4.608kB

Step 1/8 : FROM ubuntu:18.04
 ---> 775349758637
Step 2/8 : SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 ---> Using cache
 ---> b3d8c49615a7
Step 3/8 : RUN apt-get update     && apt-get install -y --no-install-recommends curl=7.* ca-certificates=*     && apt-get clean     && rm -rf /var/lib/apt/lists/*
 ---> Using cache
 ---> 9470f9c9ecea
Step 4/8 : RUN update-ca-certificates
 ---> Using cache
 ---> 80853c222946
Step 5/8 : RUN curl -sL https://get.docker.com/ | sh
 ---> Using cache
 ---> af17b9b8fb1b
Step 6/8 : RUN curl -LO https://storage.googleapis.com/container-structure-test/v1.8.0/container-structure-test-linux-amd64     && chmod +x container-structure-test-linux-amd64     && mv container-structure-test-linux-amd64 /usr/local/bin/container-structure-test
 ---> Using cache
 ---> bea1dca8e10e
Step 7/8 : VOLUME /configs
 ---> Using cache
 ---> 97e90bf8481b
Step 8/8 : ENTRYPOINT [ "/usr/local/bin/container-structure-test" ]
 ---> Using cache
 ---> 6b9746ab76d8
Successfully built 6b9746ab76d8
Successfully tagged structure:latest
SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.

Listing 3: Build docker image and store result in variable.

in which case you will only see the output from Docker, the result object is stored in $result.

You can verify the existence of the image you just created using docker images

PS C:\docker> docker images

If you want less output, use -Quiet switch to output only the final result of the command. Combined with storing the result in a variable, this will give a completely silent execution of the CmdLet.

Disabling verbose output

The -Quiet setting for CmdLets that support it, defaults to the value of the enviromenment variable DOCKER_CI_QUIET_MODE. So you can set this environment variable to the desired setting for the -Quiet switch so you don't have to set it for each invocation of a cmdlet that supports it.

Linting a Dockerfile

An important aspect of writing quality Docker images is to try and learn from the best in the community. To this end, we provide a convenient way to run hadolint against a Dockerfile. Hadolint is a 3rd party component that scans a dockerfile and produces linted output. You can find the hadolint project here: https://github.com/hadolint/hadolint

Here's how to use the linter via a CmdLet:

PS C:\docker> $result = Invoke-DockerLint .\Dockerfile
1: FROM ubuntu:18.04
2:
3: SHELL ["/bin/bash", "-o", "pipefail", "-c"]
4:
5: RUN apt-get update \
6:     && apt-get install -y --no-install-recommends curl=7.* ca-certificates=* \
7:     && apt-get clean \
8:     && rm -rf /var/lib/apt/lists/*
9:
10: RUN update-ca-certificates
11:
12: RUN curl -sL https://get.docker.com/ | sh
13:
14: RUN curl -LO https://storage.googleapis.com/container-structure-test/v1.8.0/container-structure-test-linux-amd64 \
15:     && chmod +x container-structure-test-linux-amd64 \
16:     && mv container-structure-test-linux-amd64 /usr/local/bin/container-structure-test
17:
18: VOLUME /configs
19:
20: ENTRYPOINT [ "/usr/local/bin/container-structure-test" ]

Listing 4: Build docker image and store result in variable.

This Dockerfile in particular has no linting remarks, so it is just output in its entirety with line numbers. Imagine I omitted the instruction in line 3 on how to deal with commands that fail in a piped execution and run the linting again:

PS C:\docker> $result = Invoke-DockerLint .\Dockerfile
1: FROM ubuntu:18.04
2:
3: RUN apt-get update \
4:     && apt-get install -y --no-install-recommends curl=7.* ca-certificates=* \
5:     && apt-get clean \
6:     && rm -rf /var/lib/apt/lists/*
7:
8: RUN update-ca-certificates
9:
DL4006 Set the SHELL option -o pipefail before RUN with a pipe in it
10: RUN curl -sL https://get.docker.com/ | sh
11:
12: RUN curl -LO https://storage.googleapis.com/container-structure-test/v1.8.0/container-structure-test-linux-amd64 \
13:     && chmod +x container-structure-test-linux-amd64 \
14:     && mv container-structure-test-linux-amd64 /usr/local/bin/container-structure-test
15:
16: VOLUME /configs
17:
18: ENTRYPOINT [ "/usr/local/bin/container-structure-test" ]

Listing 5: Lint docker file and store result in variable

Now, the linter is no longer happy and it has added a remark just above line 10 instructing us on how to fix the problem. The first part of the message is a unique lint rule id that can be used to find the lint rationale and in-depth explanation on https://github.com/hadolint/hadolint.

Failing the build when there are lint remarks

In CI/CD contexts, you might want to fail a build or similar, if there are linting errors. Raising an exception when there are lint remarks found is straigt-forward:

Invoke-DockerLint -TreatLintRemarksFoundAsException

Going from the example Dockerfile in listing 5, we achieve an error:

PS C:\docker> $result = Invoke-DockerLint -TreatLintRemarksFoundAsException
Assert-ExitCodeOk : The command 'Get-Content "C:\docker\Dockerfile" | docker run -i hadolint/hadolint:v1.17.2' failed with exit code: 1.
Command output:
/dev/stdin:10 DL4006 Set the SHELL option -o pipefail before RUN with a pipe in it
At C:\Users\Rasmus Jelsgaard\Documents\PowerShell\Modules\Docker-CI\0.4.8\Public\Invoke-DockerLint.ps1:31 char:9
+         Assert-ExitCodeOk $commandResult
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidResult: (:) [Assert-ExitCodeOk], Exception
+ FullyQualifiedErrorId : 1000,Assert-ExitCodeOk

PS C:\docker> $LASTEXITCODE
1

Listing 6: Fail execution if there are lint remarks.

If you would rather only fail once a certain threshold is met, you can do something like this to that effect (again based on the Dockerfile in listing 5):

PS C:\docker> $result = Invoke-DockerLint -Quiet
PS C:\docker> $result.LintRemarks.Length -gt 0
True

This concludes the examples on linting. Whilst linting can help you improve parts of your Docker-style and quality of the images, it is no substitute for real testing.

Testing a docker image

We provide testing of docker images using Google's Container Structure framework (https://github.com/GoogleContainerTools/container-structure-test).

To run tests, you first define them in .yml configs. Then you build the image the image you want to test, and then finally you run the tests.

So let's start by building an image called structure

PS C:\docker> Invoke-DockerBuild . -Quiet -ImageName structure

Dockerfile    : Dockerfile
ImageName     : structure
Registry      :
Tag           : latest
CommandResult : CommandResult

Then, we define a test to check if the correct binary was produced and placed in accordance with the documentation at https://github.com/GoogleContainerTools/container-structure-test.

The config file gcs-commands.yml looks like this:

schemaVersion: "2.0.0"

commandTests:
  - name: "say hello world"
    command: "bash"
    args:
      - -c
      - |
        echo hello &&
        echo world
    exitCode: 0
    expectedOutput: ["hello", "world"]

And you run the tests like this:

PS C:\docker> $result = Invoke-DockerTests -ImageName 3shape/containerized-structure-test -ConfigFiles gcs-commands.yml
@{Pass=1; Fail=0; Total=1; Results=System.Object[]}
PS C:\docker> $result

TestResult                                          TestReportPath            CommandResult ImageName
----------                                          --------------            ------------- ---------
@{Pass=1; Fail=0; Total=1; Results=System.Object[]} C:\docker\testreport.json CommandResult 3shape/containerized-structure-test

This concludes the section with examples. Let us know if there is something missing, that is not clear from the documentation.

Development environment setup

Install PowerShell Core 6.x or newer.
Run .\Install-Prerequisites.ps1

Name		Name	Last commit message	Last commit date
Latest commit History 112 Commits
.github		.github
.vscode		.vscode
Source		Source
Test-Data		Test-Data
Test-Source		Test-Source
build		build
docs		docs
.editorconfig		.editorconfig
.gitignore		.gitignore
Build.ps1		Build.ps1
GitVersion.yml		GitVersion.yml
Install-Prerequisites.ps1		Install-Prerequisites.ps1
Invoke-Build.ps1		Invoke-Build.ps1
Invoke-Publish.ps1		Invoke-Publish.ps1
Invoke-Tests.ps1		Invoke-Tests.ps1
LICENSE		LICENSE
README.md		README.md
azure-pipelines.yml		azure-pipelines.yml
codecov.yml		codecov.yml

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

docker-ci

Prerequisite

Installation

Examples

Listing 1: Example Dockerfile

Building an image from Dockerfile

Listing 2: Output from building a docker image

Listing 3: Build docker image and store result in variable.

Disabling verbose output

Linting a Dockerfile

Listing 4: Build docker image and store result in variable.

Listing 5: Lint docker file and store result in variable

Failing the build when there are lint remarks

Listing 6: Fail execution if there are lint remarks.

Testing a docker image

Development environment setup

About

Releases 4

Packages

Contributors 7

Languages

License

3shape/docker-ci

Folders and files

Latest commit

History

Repository files navigation

docker-ci

Prerequisite

Installation

Examples

Listing 1: Example Dockerfile

Building an image from Dockerfile

Listing 2: Output from building a docker image

Listing 3: Build docker image and store result in variable.

Disabling verbose output

Linting a Dockerfile

Listing 4: Build docker image and store result in variable.

Listing 5: Lint docker file and store result in variable

Failing the build when there are lint remarks

Listing 6: Fail execution if there are lint remarks.

Testing a docker image

Development environment setup

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 4

Packages 0

Contributors 7

Languages

Packages