lpc43xx_hic: remove the cgu code

Signed-off-by: Adrian Negreanu <[email protected]>

source/hic_hal/nxp/lpc4322/board_LPC43xx.c

@@ -20,24 +20,112 @@
  */
 
 #include "sdk.h"
-#include "lpc43xx_cgu.h"
+#include "LPC43xx.h"
+
+#define XTAL_OSC_HZ 12000000
+
+
+static void wait_usec(uint32_t clock_hz, volatile uint32_t us)
+{
+    us *= (clock_hz / 1000000) / 3;
+
+    while (us--);
+}
+
+
+static void clock_setup_base_m4(uint32_t clock_hz)
+{
+    uint32_t msel;
+    uint32_t nsel;
+    uint32_t tmp;
+
+    // 0. Select IRC as BASE_M4_CLK source
+    tmp = LPC_CGU->BASE_M4_CLK & ~(0x0F << 24);  // clear clk_sel.
+    LPC_CGU->BASE_M4_CLK = tmp
+                         | (0x01 << 11)          // AUTOBLOCK En
+                         | (0x01 << 24)          // CLK_SEL = IRC
+                         ;
+
+    // 1. Enable the crystal oscillator @12 MHz.
+    LPC_CGU->XTAL_OSC_CTRL &= ~(1 << 2);         // HF: 0=XTAL running at freq < 15 MHz.
+    LPC_CGU->XTAL_OSC_CTRL &= ~1;                // Power up XTAL.
+
+    // 2. Wait 250us
+    wait_usec(XTAL_OSC_HZ, 250);
+
+    // 3. Reconfigure PLL1 as follows:
+    //    - Select the M and N divider values
+    //      to produce the final desired
+    //      PLL1 output frequency.
+    //      Ex: 120MHz => M=10,N=1 => msel=9,nsel=0.
+    msel = clock_hz / XTAL_OSC_HZ - 1;
+    nsel = 0;
+    tmp = LPC_CGU->PLL1_CTRL & ~((0xFF << 16) | (0x03 << 12));
+    LPC_CGU->PLL1_CTRL = tmp | (msel << 16) | (nsel << 12);
+
+    //    - Select the crystal oscillator as
+    //      clock source for PLL1.
+    tmp = LPC_CGU->PLL1_CTRL & ~(0x0F << 24);    // clear CLK_SEL.
+    LPC_CGU->PLL1_CTRL = tmp
+                         | (0x01 << 11)          // AUTOBLOCK: 0=Disabled, 1=Enabled.
+                         | (0x06 << 24)          // CLK_SEL = XTAL.
+                         ;
+
+    // 4. Wait for the PLL1 to lock
+    while ((LPC_CGU->PLL1_STAT & 1) == 0x0)
+    {}
+
+    // 5. Set PLL1 P-divider to divide by 2 (DIRECT=0 and PSEL=0)
+    LPC_CGU->PLL1_CTRL &= ~((0x03 << 8) | (1 << 7));
+
+    // 6. Select PLL1 as BASE_M4_CLK source.
+    // BASE_M4_CLK is now operating in the
+    // mid frequency range (90 MHz - 110 Mhz).
+    tmp = LPC_CGU->BASE_M4_CLK & ~(0x0F << 24);  // clear CLK_SEL.
+    LPC_CGU->BASE_M4_CLK = tmp
+                         | (0x01 << 11)          // AUTOBLOCK: 0=Disabled, 1=Enabled.
+                         | (0x09 << 24)          // CLK_SEL = PLL1.
+                         ;
+    // 7. Wait 20us
+    tmp = (XTAL_OSC_HZ * (msel + 1)) / ((nsel + 1) * 2);
+    wait_usec(tmp, 20);
+
+    // 8. Set PLL P-divider to direct output mode (DIRECT=1)
+    LPC_CGU->PLL1_CTRL |= 1 << 7;
+
+    // BASE_M4_CLK is now operating in the
+    // high frequency range.
+    SystemCoreClock = (XTAL_OSC_HZ * (msel + 1)) / (nsel + 1);
+}
+
+static void clock_setup_pll0usb()
+{
+    LPC_CGU->PLL0USB_CTRL |= 1;                  // Power down PLL0USB.
+
+    // The USB core require output clock to be running @480 MHz.
+    // Setup PLL0USB to generate 480MHz from 12 MHz XTAL.
+    LPC_CGU->PLL0USB_NP_DIV = (514 << 12)        // N
+                            | (98 << 0);         // P
+    LPC_CGU->PLL0USB_MDIV = (0x7FFA << 0)        // MDEC
+                          | (0x0B << 17)         // SELP
+                          | (0x10 << 22)         // SELI
+                          | (0x00 << 28)         // SELR
+                          ;
+    LPC_CGU->PLL0USB_CTRL = (0 << 0)             // PD: 0=Power Up.
+                          | (0x01 << 2)          // DIRECTI: 1=bypass pre-divider.
+                          | (0x01 << 3)          // DIRECTO: 1=bypass post-divider.
+                          | (0x01 << 4)          // CLKEN
+                          | (0x01 << 11)         // AUTOBLOCK: 0=Disabled, 1=Enabled.
+                          | (0x06 << 24)         // CLK_SEL = XTAL_OSC.
+                          ;
+
+    LPC_CREG->CREG0 &= ~(1 << 5);                // Enable USB0 PHY power.
+}
+
 
 void sdk_init(void)
 {
-    /* Set core clock to 120MHz */
-    CGU_Init(120000000);
-    /* Set up USB0 clock */
-    /* Disable PLL first */
-    CGU_EnableEntity(CGU_CLKSRC_PLL0, DISABLE);
-
-    /* the usb core require output clock = 480MHz */
-    if (CGU_SetPLL0() != CGU_ERROR_SUCCESS) {
-        while (1);
-    }
-
-    CGU_EntityConnect(CGU_CLKSRC_XTAL_OSC, CGU_CLKSRC_PLL0);
-    /* Enable PLL after all setting is done */
-    CGU_EnableEntity(CGU_CLKSRC_PLL0, ENABLE);
-    /* Turn on the USB0PHY */
-    LPC_CREG->CREG0 &= ~(1 << 5);
+    clock_setup_base_m4(120000000);
+
+    clock_setup_pll0usb();
 }