Note: Before you update your CFW with my last releases, check first whether it has Support or whether it needs new Support, it may be that Atmosphère and Hekate need an update for the new Switch Firmware. I will always adjust Atmospehre and Hekate so that you don't have any problems with my releases!
- If you need help with an Update, open an Issues
- I will never support Piracy because I am not a fan of stealing anything
- SciresM
- CTCaer
- Sthetix
- meganukebmp
- suchmememanyskill
With this method, the switch does not burn any fuses during the Firmware update, which means you can always downgrade
- Follow this Guide, these are easy steps!
- 1: Download my last Releases
- 2: unpack the Firmware with winrar or 7zip
- 3: Copy the entire contents into your root directory of your memory card
- 4: Put your memory card back into your Switch and start your console with the fusee.bin payload
- 5: Once booted, hold R while launching a game to boot into the homebrew menu.
- 6: Find Daybreak in the homebrew menu and launch it.
- 7: Select the Firmware from your root directory.
- 8: Tap on Continue and then Preserve settings.
- If you see the message Warning: exFAT firmware is missing or corrupt, you likely don't have the exFAT driver
- installed on your sysMMC. Just press continue if this is the case.
- 9: If it is available choose Install (FAT32 + exFAT), otherwise Install (FAT32) and then Continue.
- 10: Wait until Daybreak completes installing the dumped firmware
- 11: Once it completes, it will ask if you want to reboot. Tap Reboot.
- 12: Once rebooted, launch into emuMMC and verify your system works. You can verify your system has been properly updated in Settings -> System.
- 13: Enjoy.
- STOCK is OFW. It is the actual factory firmware that comes from the factory
- SYSMMC is OFW with patches or CFW. You can run homebrews on it but do not install game backups on this world unless you know what you are doing and its consequences. It reflects the OFW/STOCK itself.
- EMUMMC is the emulated SYSMMC. It copied itself from the OFW and placed inside the micro SD card, and it is always in the CFW method. It is unrelated to the STOCK/OFW/SYSMMC as it is a different entity after creation.